1. හැඳින්වීම
This manual provides detailed instructions for the safe and efficient operation of your GBC AWM-D Dual Twinbinder. This machine is designed for both plastic comb binding (CERLOX) and wire binding (TWINLOOP), offering versatility for various document binding needs. Please read this manual thoroughly before initial use and keep it for future reference.
Figure 1: GBC AWM-D Dual Twinbinder. This image shows the complete binding machine with its two operating handles and distinct sections for plastic comb and wire binding.
2. ආරක්ෂිත උපදෙස්
- යන්ත්රය සැමවිටම ස්ථාවර, පැතලි මතුපිටක් මත ක්රියාත්මක කරන්න.
- ක්රියාත්මක වන විට අත් සහ ලිහිල් ඇඳුම් චලනය වන කොටස් වලින් ඈත් කර තබන්න.
- Do not exceed the maximum punching capacity of 12 sheets per punch. Overloading can damage the machine.
- Ensure the machine is unplugged before cleaning or maintenance.
- දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
- Use only with compatible plastic combs and wire binding elements.
3. නිෂ්පාදන අවසන්view
The GBC AWM-D Dual Twinbinder features two distinct punching and binding mechanisms to accommodate both plastic comb and wire binding styles.
ප්රධාන සංරචක:
- Punching Levers: Two levers for manual punching.
- Plastic Comb Punching Slot: For rectangular holes (2:1 pitch).
- Wire Binding Punching Slot: For square holes (3:1 pitch).
- Comb Opener: Mechanism for expanding plastic combs.
- Wire Closer: Mechanism for crimping wire binding elements.
- Margin Depth Adjuster: Controls the distance of the holes from the paper edge.
- Paper Size Guide: Ensures proper paper alignment.
- Waste Tray: Collects paper chads from punching.
Figure 2: Close-up of the integrated measuring guide. This guide assists in selecting the correct binding element size for both 2:1 (plastic comb) and 3:1 (wire) pitches.
Figure 3: Margin depth adjuster. This knob allows adjustment of the punching margin, ensuring durability and proper page turning.
4. පිහිටුවීම
- ඇසිරීම: Carefully remove the Twinbinder from its packaging. Retain packaging for future transport or storage.
- ස්ථානගත කිරීම: Place the machine on a sturdy, level surface with adequate space for operation.
- Waste Tray: Ensure the waste tray is correctly inserted at the bottom of the machine. Empty it regularly.
- Adjust Margin Depth: Use the margin depth adjuster (Figure 3) to set the desired distance from the paper edge to the punched holes. A deeper margin is recommended for thicker documents.
5. මෙහෙයුම් උපදෙස්
5.1. Measuring Binding Element Size
Use the integrated measuring guide (Figure 2) to determine the appropriate size of plastic comb or wire binding element for your document thickness. Align your stack of pages against the guide to find the recommended size.
5.2. Punching Pages
The GBC AWM-D can punch up to 12 sheets of standard 80gsm paper at a time. Do not exceed this capacity to prevent damage to the punching mechanism.
- Select Punching Type:
- For plastic comb binding (CERLOX), use the section with rectangular holes (2:1 pitch).
- For wire binding (TWINLOOP), use the section with square holes (3:1 pitch).
- කඩදාසි පෙළගස්වන්න: Insert the stack of paper into the chosen punching slot, ensuring it is flush against the paper stop.
- පන්ච්: Firmly pull down the corresponding punching lever. Return the lever to its original position.
- නැවත කරන්න: Continue punching in small batches until all pages are perforated.
Figure 4: Close-up of the punching pins. The machine features robust punching pins for consistent hole formation.
5.3. Plastic Comb Binding (CERLOX)
This machine binds up to 280 sheets using plastic combs (2:1 pitch).
- Open Comb: Place the plastic comb onto the comb opener mechanism with the teeth facing upwards. Pull the comb opener lever to expand the comb.
- Load Pages: Carefully load the punched pages onto the open comb teeth. Start with the back cover, then the main document pages, and finally the front cover.
- Close Comb: Push the comb opener lever back to its original position to close the comb, securing the document.
රූපය 5: උදාample of a document bound with a plastic comb. This image illustrates the finished appearance of a plastic comb bound document.
5.4. Wire Binding (TWINLOOP)
This machine binds up to 120 sheets using wire binding elements (3:1 pitch).
- පැටවුම් වයර්: Place the open wire binding element onto the wire holder hooks, ensuring the open side faces upwards.
- Load Pages: Carefully load the punched pages onto the wire loops. Start with the front cover (face down), then the main document pages, and finally the back cover (face up).
- Transfer to Closer: Remove the loaded wire and place it into the wire closer slot.
- Close Wire: Pull the wire closer lever down firmly to crimp the wire, securing the document. Adjust the wire closer setting if necessary for a perfect close.
Figure 6: Close-up of the wire binding mechanism. This shows the section where wire elements are placed for closing.
රූපය 7: උදාample of wire binding loops. This image displays the characteristic double-loop wire binding.
6. නඩත්තු කිරීම
- Empty Waste Tray: Regularly check and empty the waste tray to prevent paper chad buildup, which can affect punching performance.
- පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් යන්ත්රයේ පිටත කොටස පිස දමන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න.
- ලිහිසි තෙල්: The punching mechanism is designed for long-term use and generally does not require lubrication. If you notice stiffness, consult customer support.
- ගබඩා: When not in use, store the machine in a clean, dry environment.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Pages not punching cleanly. | Overloading the machine; dull punching dies; waste tray full. | Reduce the number of sheets per punch; empty waste tray. If problem persists, contact support. |
| Binding element not closing properly. | Incorrect binding element size; improper adjustment of closer mechanism. | Ensure correct binding element size is used; adjust the wire closer setting (if applicable) or ensure comb opener is fully closed. |
| කඩදාසි හිරවීම්. | Overloading; misaligned paper. | Reduce sheet count; ensure paper is properly aligned against the guide before punching. |
8. පිරිවිතර
- ආකෘතිය: GBC AWM-D
- Binding Type: Dual (Plastic Comb & Wire)
- විදින ධාරිතාව: තහඩු 12 (80gsm කඩදාසි)
- Plastic Comb Binding Capacity: Up to 280 sheets (2:1 pitch)
- Wire Binding Capacity: Up to 120 sheets (3:1 pitch)
- සිදුරු සිදුරු: Rectangular (2:1 pitch for plastic), Square (3:1 pitch for wire)
- ද්රව්ය: Plastic and Metal construction
- මානයන්: 47.8 x 53.6 x 33.8 cm (18.8 x 21.1 x 13.3 අඟල්)
- බර: 26.06 kg (රාත්තල් 57.45)
9. වගකීම් සහ සහාය
For warranty information or technical assistance, please refer to the official GBC website or contact your local GBC authorized dealer. Keep your purchase receipt as proof of purchase.
GBC Webඅඩවිය: www.gbc.com
