1. හැඳින්වීම
The Kidde i12010SCO is a hardwired combination smoke and carbon monoxide alarm designed to provide protection from two hazards in a single unit. It features a 10-year sealed lithium battery backup, eliminating the need for battery replacement throughout the alarm's lifespan. This alarm utilizes intelligent sensor technology to offer a fast response to various fire types, including smoldering and fast-flaming fires, while also detecting carbon monoxide (CO) and reducing nuisance alarms.
ප්රධාන ලක්ෂණ:
- ද්විත්ව ආරක්ෂාව: Detects both smoke and carbon monoxide.
- 10-Year Sealed Battery Backup: No battery replacement required for the life of the alarm.
- Voice Warning System: Verbally announces "Fire" or "Warning, Carbon Monoxide" to clearly identify the hazard.
- අයනීකරණ සංවේදන තාක්ෂණය: Optimized for detecting fast-flaming fires.
- Hush Feature: කරදරකාරී අනතුරු ඇඟවීම් ආසන්න වශයෙන් මිනිත්තු 9ක් තාවකාලිකව නිහඬ කරයි.
- අන්තර් සම්බන්ධිත: Can connect with up to 24 compatible Kidde devices (18 initiating).
Figure 1: Kidde i12010SCO highlighting its 10-year battery and voice alarm capabilities.
2. වැදගත් ආරක්ෂක තොරතුරු
WARNING: PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION AND OPERATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN PROPERTY DAMAGE, INJURY, OR DEATH.
- This alarm is designed for residential use only.
- Regularly test the alarm weekly by pressing the test/reset button.
- Do not paint the alarm. Paint can clog the sensing chambers and prevent the alarm from operating properly.
- Do not install in areas with extreme temperatures or humidity.
- Ensure power is OFF at the circuit breaker before installation or maintenance.
3. පැකේජ අන්තර්ගතය
පහත අයිතම ඔබේ පැකේජයට ඇතුළත් කර ඇති බව තහවුරු කරගන්න:
- Kidde i12010SCO Combination Smoke and Carbon Monoxide Alarm
- සවිකරන වරහන
- රැහැන් පටි
- ස්ථාපන මාර්ගෝපදේශය සහ පරිශීලක අත්පොත
රූපය 2: ඉදිරිපස view of the Kidde i12010SCO alarm with its wiring harness.
4. ස්ථාපනය
This alarm is designed to be hardwired into a 120V AC circuit. It is recommended that a qualified electrician install this unit.
ස්ථාපන පියවර:
- බලය අක්රිය කරන්න: Before beginning installation, ensure the power to the circuit where the alarm will be installed is turned off at the main fuse or circuit breaker panel.
- පැරණි අනතුරු ඇඟවීම ඉවත් කරන්න (අදාළ නම්): If replacing an existing alarm, carefully remove it from its mounting bracket and disconnect the wiring harness.
- සවිකරන වරහන ස්ථාපනය කරන්න: Secure the new mounting bracket to the electrical box using the provided screws. Ensure the bracket is firmly attached.
- රැහැන් පටි සම්බන්ධ කරන්න: Connect the new wiring harness to the household wiring. Match the wire colors: black to black (hot), white to white (neutral), and red to red (interconnect, if applicable). Use wire nuts to secure connections. If not interconnecting, cap the red wire.
- Attach Alarm to Harness: Plug the alarm unit into the wiring harness.
- Mount Alarm: අනතුරු ඇඟවීම සවිකරන වරහන සමඟ පෙළගස්වා එය ආරක්ෂිතව අගුළු දමන තුරු දක්ෂිණාවර්තව කරකවන්න.
- Activate Battery Backup: Once the alarm is mounted, remove the battery activation tag (if present) to activate the sealed 10-year lithium battery backup.
- බලය ප්රතිස්ථාපනය කරන්න: Turn the power back on at the main fuse or circuit breaker panel.
- පරීක්ෂණ අනතුරු ඇඟවීම: Press and hold the Test/Reset button for a few seconds until the alarm sounds and the voice announcement is heard.
Figure 3: Proper installation of the alarm on a ceiling.
Figure 4: The wiring harness for connecting the alarm to household electrical wiring.
Video 1: Official product video demonstrating the features and benefits of the Kidde Smoke and Carbon Monoxide Detector Alarm with Voice Warning.
5. මෙහෙයුම
Voice Warning System:
The alarm provides clear voice announcements to distinguish between smoke and carbon monoxide hazards:
- Smoke Detected: The alarm will sound and announce "Fire! Fire!"
- Carbon Monoxide Detected: The alarm will sound and announce "Warning, Carbon Monoxide!"
Figure 5: Visual representation of the voice warning system for smoke and carbon monoxide.
පරීක්ෂණ/නැවත පිහිටුවීමේ බොත්තම:
- පරීක්ෂා කිරීම: Press and hold the Test/Reset button to test the alarm's circuitry and voice announcement. The alarm will cycle through its warning sounds and voice messages.
- යළි පිහිටුවීම: If the alarm is sounding due to a detected hazard, pressing the Test/Reset button will silence the alarm for a short period. If the hazard persists, the alarm will reactivate.
Hush Feature:
The Hush feature temporarily silences the alarm for approximately 9 minutes in case of a nuisance alarm (e.g., cooking smoke). To activate, press the Test/Reset button during an alarm. The alarm will enter Hush mode only if it is in an alarm state. After 9 minutes, the alarm will automatically reset and resume normal operation.
Figure 6: Location of the Test/Hush button on the alarm unit.
අන්තර් සම්බන්ධතාවය:
This alarm can be interconnected with up to 24 compatible Kidde devices, with a maximum of 18 initiating devices. When one interconnected alarm senses a hazard, all interconnected alarms will sound, providing early warning throughout your home.
Figure 7: The Smart Interconnect feature allows multiple alarms to communicate.
6. නඩත්තු කිරීම
බැටරි:
The Kidde i12010SCO features a sealed 10-year lithium battery that does not require replacement. The alarm is designed to operate for 10 years from the date of activation. After 10 years, the unit should be replaced.
Cleaning Your Alarm:
It is recommended to clean your alarm every six months to prevent dust and debris from interfering with its operation.
- Use a soft brush or a vacuum cleaner with a soft brush attachment to remove dust from the alarm's vents.
- ජලය, පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න, මේවා ඒකකයට හානි කළ හැකිය.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| අනතුරු ඇඟවීමේ නාදය වරින් වර නාද වේ | Low battery (after 10 years) or unit not properly seated. | Replace the entire alarm unit if it's past its 10-year life. Ensure the alarm is twisted securely onto its mounting bracket. |
| Nuisance alarms (false alarms) | Cooking fumes, steam, high humidity, dust, or insects. | Use the Hush feature. Relocate the alarm if it's consistently exposed to nuisance sources. Clean the alarm regularly. |
| පරීක්ෂණය අතරතුර අනතුරු ඇඟවීම නාද නොවේ | No AC power, battery not activated, or faulty unit. | Check circuit breaker. Ensure battery activation tag is removed. If issues persist, replace the unit. |
8. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| ආදර්ශ අංකය | i12010SCO |
| බලශක්ති ප්රභවය | Hardwired (120 Volts AC) with 10-Year Sealed Lithium Battery Backup |
| සංවේදක වර්ගය | Ionization (Smoke) & Electrochemical (CO) |
| අනතුරු ඇඟවීමේ වර්ගය | Audible (85 dB at 10 feet) & Voice Warning |
| මෙහෙයුම් උෂ්ණත්වය | 40°F (4.4°C) සිට 100°F (37.8°C) |
| මෙහෙයුම් ආර්ද්රතාවය | 10%-85% non-condensing relative humidity (RH) |
| මානයන් | අඟල් 5.5 x 1.5 x 5.5 |
| අයිතමයේ බර | අවුන්ස 12 (ග්රෑම් 340) |
| අන්තර් සම්බන්ධිත | කිඩ් උපාංග 24ක් දක්වා (ආරම්භක 18) |
Figure 8: Dimensions of the Kidde i12010SCO alarm.
9. වගකීම් සහ සහාය
වගකීම් තොරතුරු:
Kidde offers a limited warranty for this product. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details. Keep your proof of purchase for warranty claims.
පාරිභෝගික සහාය:
For technical assistance, troubleshooting, or warranty inquiries, please contact Kidde Customer Support. Contact information can typically be found on the product packaging or on the official Kidde website. It is recommended to have your product model number (i12010SCO) and date of purchase available when contacting support.
සබැඳි සම්පත්: For additional information, FAQs, and product registration, visit the official Kidde webඅඩවිය: www.kidde.com
