1. හැඳින්වීම
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of your Livpure Eco Touch 2000 RO+UV Water Purifier. Please read this manual thoroughly before using the appliance to ensure safe and efficient operation. Keep this manual for future reference.
2. ආරක්ෂිත උපදෙස්
උපකරණයට තුවාල හෝ හානි වැළැක්වීම සඳහා පහත සඳහන් ආරක්ෂක පියවරයන් නිරීක්ෂණය කරන්න:
- බල සැපයුම නිෂ්පාදන ලේබලයේ ලැයිස්තුගත කර ඇති පිරිවිතරයන්ට ගැලපෙන බවට වග බලා ගන්න.
- හානියට පත් විදුලි රැහැනකින් හෝ ප්ලග් එකකින් පිරිසිදුකාරකය ක්රියාත්මක නොකරන්න.
- උපකරණය සෘජු හිරු එළිය, තාප ප්රභවයන් සහ දැවෙන ද්රව්ය වලින් ඈත් කර තබන්න.
- Do not immerse the purifier in water or spray water directly onto it.
- ළමයින් උපකරණය සමඟ සෙල්ලම් නොකරන බව සහතික කිරීම සඳහා ඔවුන් අධීක්ෂණය කළ යුතුය.
- Only use genuine Livpure spare parts for replacement to maintain performance and warranty.
- For any repairs or servicing, contact authorized service personnel only.
3. නිෂ්පාදන අවසන්view
The Livpure Eco Touch 2000 is an advanced RO+UV water purifier designed to provide clean and safe drinking water. It features a 6-stage purification system capable of handling water with TDS levels up to 2000 ppm and delivers a purification rate of 15 liters per hour.
රූපය 1: ඉදිරිපස view of the Livpure Eco Touch 2000 RO+UV Water Purifier. This image shows the compact design and user interface.
3.1. Purification Stages
The purifier employs a multi-stage purification process to ensure high-quality water:
- අවසාදිත පෙරහන: Removes coarse and fine particulate impurities like dust, sand, and mud.
- Pre Carbon Block: Absorbs chlorine, organic impurities, and bad odors from the water.
- Anti-Scalant Cartridge: Prevents scaling on the RO membrane, extending its lifespan.
- RO පටල: Reduces dissolved salts, heavy metals, pesticides, and other chemical impurities.
- UV Disinfection Column: Deactivates bacteria, viruses, and other microorganisms.
- Silver Impregnated Post Carbon: Further polishes the water, enhancing taste and preventing bacterial growth.
4. පිහිටුවීම සහ ස්ථාපනය
The Livpure Eco Touch 2000 is designed for freestanding installation. It is highly recommended to have the installation performed by an authorized Livpure service technician to ensure proper setup and validate the product warranty.
4.1. පූර්ව ස්ථාපන චෙක්පත්
- Ensure a suitable location is available, away from direct sunlight and heat.
- Verify that a proper water inlet connection with adequate pressure is accessible.
- Confirm the availability of a functional electrical outlet (230V AC, 50Hz).
- Unpack all components and check for any damage during transit. The package should include: 1 Water Purifier, 1 Pre Filter, User Manual, Warranty Card, and Installation Kit.
4.2. ස්ථාපන පියවර (සාමාන්ය)
- Mount the pre-filter unit (if external) and connect it to the raw water supply.
- Connect the pre-filtered water outlet to the purifier's inlet.
- Connect the drain line from the purifier to a suitable drainage point.
- විදුලි රැහැන භූගත විදුලි අලෙවිසැලකට සම්බන්ධ කරන්න.
- Open the water supply valve to allow water into the purifier.
- Allow the storage tank to fill completely and drain the first few liters of purified water to flush the system.
Note: Detailed installation instructions are provided by the authorized service technician during installation. Do not attempt self-installation if you are not qualified.
5. මෙහෙයුම් උපදෙස්
Once installed and flushed, your Livpure Eco Touch 2000 is ready for use.
- බල ගැන්වීම: Ensure the purifier is plugged in and the power switch is turned on. The purifier will automatically start the purification process when the water level in the storage tank is low.
- ජලය බෙදා හැරීම: To dispense purified water, open the tap located on the front of the purifier. Close the tap after use.
- ස්වයංක්රීය ක්රියාකාරිත්වය: The purifier is designed for automatic operation. It will stop purification once the storage tank is full and restart when water is drawn.
- දර්ශක පහන්: Observe the indicator lights (if present) for power, purification status, and tank full status. Refer to the labels on your specific unit for their meaning.
6. නඩත්තු කිරීම
Regular maintenance is crucial for the optimal performance and longevity of your water purifier. Always disconnect the power supply before performing any maintenance.
6.1. පෙරහන ප්රතිස්ථාපනය
Filters and membranes have a limited lifespan and require periodic replacement. The frequency depends on the quality of raw water and usage. It is recommended to replace filters as per the schedule below or when indicated by the purifier's alerts (if applicable).
- Sediment Filter & Pre Carbon Block: Typically every 6-12 months.
- RO Membrane & UV Lamp: Typically every 12-24 months, or as advised by a service technician based on water quality.
- පශ්චාත් කාබන් පෙරහන: Typically every 12 months.
Note: Always use genuine Livpure replacement filters. Contact authorized service for filter replacement.
6.2. Cleaning the Purifier
- බාහිර: පිරිසිදුකාරකයේ බාහිර කොටස මෘදු, d රෙදි කැබැල්ලකින් පිස දමන්න.amp රෙදි. දරුණු රසායනික ද්රව්ය හෝ උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
- ගබඩා ටැංකිය: The internal storage tank should be cleaned periodically by an authorized service technician during routine maintenance.
7. දෝශ නිරාකරණය
This section addresses common issues you might encounter. For problems not listed here, or if solutions do not resolve the issue, contact customer support.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ජලය බෙදා හැරීමක් නැත | No power, water inlet closed, low water pressure, tank empty. | Check power connection, open inlet valve, check household water supply, wait for tank to fill. |
| මන්දගාමී ජල ප්රවාහය | Clogged filters, low water pressure, partially closed inlet valve. | Check inlet valve, contact service for filter inspection/replacement. |
| Unusual taste/odor in water | Expired or damaged filters (especially carbon filters), new filter installation (initial flush needed). | Flush a few liters of water if filters are new. If problem persists, contact service for filter replacement. |
| ජලය කාන්දු වීම | Loose connections, damaged components. | Immediately turn off water supply and power. Contact authorized service. |
8. පිරිවිතර
Key technical specifications for the Livpure Eco Touch 2000 RO+UV Water Purifier:
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | ලිව්පූර් |
| මාදිලියේ නම | Eco Touch |
| පිරිසිදු කිරීමේ ක්රමය | Reverse Osmosis, Ultraviolet |
| විශේෂ ලක්ෂණය | Works up to 2000 TDS level |
| උපරිම ප්රවාහ අනුපාතය | පැයකට ලීටර් 15 |
| ස්ථාපන වර්ගය | නිදහසේ හැසිරවීම |
| අයිතමයේ බර | 11 kg 400 ග්රෑම් |
| වර්ණය | White and Indigo Blue |
9. වගකීම් සහ සහාය
Your Livpure Eco Touch 2000 RO+UV Water Purifier comes with a නිෂ්පාදනය සඳහා වසර 1ක වගකීමක් මිලදී ගත් දින සිට. මෙම වගකීම් සහතිකය සාමාන්ය භාවිත තත්ත්වයන් යටතේ නිෂ්පාදන දෝෂ ආවරණය කරයි.
For warranty claims, service requests, or technical assistance, please contact Livpure customer support. Refer to the warranty card included with your product for specific terms and conditions, and contact details.
පාරිභෝගික සහාය:
- Refer to your product's warranty card for the most current contact information.
- Keep your purchase invoice and warranty card handy when contacting support.
