Extech MF100 AC/DC Magnetic Field Meter

හැඳින්වීම

The Extech MF100 is a versatile AC/DC Magnetic Field Meter designed for accurate measurement of magnetic fields. It incorporates a Hall effect sensor with automatic temperature compensation, ensuring reliable readings across various environmental conditions. This device is suitable for a range of applications requiring precise magnetic field analysis.

Figure 1: The Extech MF100 AC/DC Magnetic Field Meter, showing the main unit connected to its uniaxial magnetic probe sensor.

විශේෂාංග

• Utilizes Hall effect sensor with Automatic Temperature Compensation (ATC)
• N pole/S pole indicator for magnetic field direction
• Zero button for accurate DC measurement
• Data Hold function to freeze readings
• Min/Max recording for capturing extreme values
• Auto power off with disable feature to conserve battery life

පැකේජයේ අන්තර්ගතය

පැකේජය විවෘත කිරීමෙන් පසු, කරුණාකර සියලුම අයිතම පවතින බවත් හානි වී නොමැති බවත් තහවුරු කරගන්න:

• Extech MF100 AC/DC Magnetic Field Meter
• Uniaxial Magnetic Probe Sensor
• Protective Cover for the probe
• 9V බැටරි (ඇතුළත්)
• අමාරු රැගෙන යන නඩුව

ආරක්ෂිත තොරතුරු

Please read and understand all safety precautions before operating the Extech MF100. Failure to follow these instructions may result in injury or damage to the device.

• Do not attempt to open the meter casinඋ. සේවා කටයුතු සිදු කළ යුත්තේ සුදුසුකම් ලත් පුද්ගලයින් විසින් පමණි.
• Keep the device away from strong electromagnetic fields that are not being measured, as this may affect accuracy.
• භාවිතයට පෙර බැටරි මැදිරිය ආරක්ෂිතව වසා ඇති බවට වග බලා ගන්න.
• දේශීය රෙගුලාසිවලට අනුව බැටරි බැහැර කරන්න.
• Avoid dropping the meter or subjecting it to severe impact.

සැලසුම

1. බැටරි ස්ථාපනය: Open the battery compartment cover on the back of the meter. Insert the included 9V battery, observing the correct polarity. Close the cover securely.
2. පරීක්ෂණ සම්බන්ධතාවය: Connect the uniaxial magnetic probe sensor cable to the input jack located at the top of the MF100 meter. Ensure the connection is firm.
3. ආරක්ෂිත ආවරණය: Place the protective cover over the probe tip when not in use to prevent damage.

මෙහෙයුම් උපදෙස්

This section details the basic operation of the Extech MF100.

1. බලය සක්රිය / අක්රිය: ඔබන්න බලය button to turn the meter on or off. The display will illuminate.
2. Selecting AC/DC Mode: ඔබන්න MODE DC/AC button to toggle between AC (alternating current) and DC (direct current) magnetic field measurement modes. The selected mode will be indicated on the display.
3. Zeroing for DC Measurement: Before taking DC measurements, press the ZERO button to calibrate the meter and eliminate any residual magnetic fields. This ensures accurate DC readings.
4. මිනුම් ගැනීම: Position the tip of the uniaxial magnetic probe sensor in the magnetic field you wish to measure. The reading will be displayed on the LCD. The N pole/S pole indicator will show the direction of the magnetic field.
5. දත්ත රඳවා තබා ගැනීම: ඔබන්න අල්ලා ගන්න සංදර්ශකයේ වත්මන් කියවීම කැටි කිරීමට බොත්තම. මුදා හැරීමට නැවත ඔබන්න.
6. Min/Max Recording: ඔබන්න REC button once to enter Min/Max recording mode. The meter will continuously record the minimum and maximum values. Press REC again to cycle through Min, Max, and current readings. Press and hold REC to exit Min/Max mode.
7. ස්වයංක්‍රීය බලය අක්‍රිය: The meter will automatically power off after a period of inactivity to conserve battery. To disable this feature, refer to the full manual for specific button sequences during power-on.

Figure 2: The Extech MF100 being used by a technician to measure a magnetic field in a laboratory environment.

Figure 3: The Extech MF100 in use outdoors, demonstrating its portability and application in various field conditions.

නඩත්තු කිරීම

• පිරිසිදු කිරීම: Wipe the meter and probe with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• බැටරි ආදේශනය: When the low battery indicator appears on the display, replace the 9V battery promptly to ensure accurate operation.
• ගබඩා: Store the meter in its hard carrying case in a cool, dry place when not in use. Remove the battery if storing for extended periods to prevent leakage.

දෝෂගවේෂණය

පිරිවිතර

වගකීම් සහ සහාය

Warranty information for the Extech MF100 is typically provided with the product packaging or can be found on the official Extech website. For technical support, service, or to inquire about replacement parts, please visit the Extech Store on Amazon හෝ නිෂ්පාදකයාගේ නිලධාරියා webඅඩවිය.