Newmowa NB-11L-DU

Newmowa NB-11L/11LH Battery and Dual USB Charger Kit Instruction Manual

1. නිෂ්පාදන අවසන්view

This manual provides instructions for the Newmowa NB-11L/11LH Battery (2 Pack) and Dual USB Charger Kit. This kit is designed to provide reliable power for your compatible Canon cameras, offering a convenient and efficient charging solution.

The kit includes two NB-11L/11LH compatible batteries and one dual USB charger, along with a micro USB cable.

1.1. පැකේජ අන්තර්ගතය

1.2. අනුකූල කැමරා ආකෘති

The Newmowa NB-11L/11LH batteries and charger are compatible with various Canon camera models, including but not limited to:

Image showing various Canon camera models compatible with NB-11L/11LH batteries.
Figure 1: Compatible Canon camera models.

This image displays several Canon PowerShot and ELPH camera models, such as A2300 IS, A4000 IS, ELPH 110 HS, and SX400 IS, indicating their compatibility with the NB-11L/11LH battery kit.

2. සැකසුම සහ පළමු භාවිතය

Before using your new batteries, it is recommended to fully charge them. Follow these steps for initial setup:

  1. බැටරි ඇතුළු කරන්න: Carefully insert one or two NB-11L/11LH batteries into the charging slots of the Newmowa Dual USB Charger. Ensure the battery contacts align correctly with the charger pins.
  2. සම්බන්ධක බලය: Connect the provided micro USB cable to the charger's input port.
  3. බල ප්‍රභවයට සම්බන්ධ වන්න: Plug the other end of the micro USB cable into a compatible USB power source, such as a USB wall charger, car charger, power bank, or laptop USB port.
  4. Observe Charging Indicators: The LED indicator lights on the charger will illuminate. A red light indicates that the battery is currently charging. A green light indicates that the battery is fully charged or no battery is present in the slot.
Image showing how to insert batteries into the charger and connect the USB cable.
Figure 2: Battery insertion and charger connection.

This image illustrates the step-by-step process of placing the NB-11L battery into the Newmowa dual charger and connecting the micro USB cable to a power source.

3. මෙහෙයුම් උපදෙස්

3.1. ආරෝපණ ක්රියාවලිය

The Newmowa Dual USB Charger is designed to charge one or two batteries simultaneously. Each charging slot has an independent LED indicator.

Image showing the dual charger with batteries inserted and LED indicators for charging status.
Figure 3: Charging status indicators.

This image highlights the LED indicators on the Newmowa dual charger, showing a red light for charging and a green light for a fully charged battery or an empty slot.

3.2. Multiple Charging Options

The charger offers versatile power input options, allowing you to charge your batteries conveniently in various situations:

Image illustrating various power sources for the dual USB charger, including wall charger, power bank, laptop, and car charger.
Figure 4: Multiple charging options.

This image displays icons representing different ways to power the Newmowa dual charger: a USB wall charger, a power bank, a laptop, and a car charger, emphasizing its versatility.

3.3. Using Charged Batteries

Once fully charged, remove the batteries from the charger and insert them into your compatible Canon camera according to your camera's instruction manual. The batteries are ready for use.

4. නඩත්තුව සහ ආරක්ෂාව

4.1. බැටරි රැකවරණය

4.2. Charger Care

4.3. ආරක්ෂිත මාර්ගෝපදේශ

The Newmowa charger and batteries are built with multiple protection features to ensure safe operation:

අවවාදයයි: Do not expose batteries to high temperatures, disassemble, or short circuit. Dispose of batteries properly according to local regulations.

Image illustrating various safety protection features of the Newmowa charger, including short circuit, voltage, current, discharge, and battery PTC protection.
Figure 5: Built-in safety protections.

This image visually represents the comprehensive safety features integrated into the Newmowa charger, such as protection against short circuits, over-voltage, over-current, over-discharge, and PTC protection for the battery.

5. දෝශ නිරාකරණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
චාජර් LED එක පත්තු වෙන්නේ නැහැ.බල සැපයුමක් හෝ දෝෂ සහිත සම්බන්ධතාවයක් නොමැත.Ensure the micro USB cable is securely connected to both the charger and the power source. Try a different USB port or power adapter.
LED remains green when battery is inserted.Battery is already fully charged or not properly inserted.Remove and re-insert the battery, ensuring proper contact. If it remains green, the battery is likely fully charged.
Battery does not hold charge well.Battery degradation or improper charging.Ensure the battery is fully charged before use. Over time, all rechargeable batteries degrade. If the issue persists, consider replacing the battery.
Charger or battery feels warm during charging.Normal operation or potential overheating.A slight warmth is normal. If it becomes excessively hot, disconnect immediately and contact customer support. Ensure proper ventilation around the charger.

6. නිෂ්පාදන පිරිවිතර

විශේෂාංගයපිරිවිතර
බැටරි ආකෘතියNB-11L / NB-11LH (Compatible)
බැටරි වෙළුමtage3.6V
බැටරි ධාරිතාව680mAh (2.4Wh)
Charger Input Voltage5V (via Micro USB)
Charger Output Voltage5V
චාජර් වර්ගයද්විත්ව USB චාජරය
ආරක්ෂිත විශේෂාංගOver-charging, Short-circuit, High-temperature, Surge, Current, Discharge, Battery PTC Protection
අයිතම ආදර්ශ අංකයNB-11L-DU
අයිතමයේ බරApproximately 4.2 ounces (total kit)
මානයන් (පැකේජය)අඟල් 5.94 x 2.95 x 2.24

7. වගකීම් සහ පාරිභෝගික සහාය

Newmowa provides a වසර 1ක වගකීමක් for this product, covering manufacturing defects and malfunctions under normal use. For any issues or inquiries, please contact Newmowa customer service.

Newmowa is committed to providing 24-hour friendly customer service to assist you with any questions or concerns regarding your product.

For support, please refer to the contact information provided with your purchase or visit the official Newmowa webඅඩවිය.

අදාළ ලියකියවිලි - NB-11L-DU

පෙරview Newmowa MP02 Bluetooth දුරස්ථ පාලක පරිශීලක අත්පොත
Newmowa MP02 බ්ලූටූත් දුරස්ථ පාලකය සඳහා පරිශීලක අත්පොත, එහි විශේෂාංග, පිරිවිතර, යුගල කිරීමේ උපදෙස්, LED දර්ශක, බ්ලූටූත් සම්බන්ධතාවය, FCC අනුකූලතාව සහ වගකීම් තොරතුරු විස්තර කරයි.
පෙරview IoT සේවාදායක සඳහා ඩ්‍රැගිනෝ NB-IoT සංවේදක වින්‍යාස මාර්ගෝපදේශය
ThingSpeak, Datacake, Node-Red, ThingsBoard, සහ වැනි විවිධ IoT සේවාදායකයන් සමඟ සම්බන්ධ වීමට Dragino NB-IoT මාදිලි (-NB, -NS) සඳහා වින්‍යාස විධාන සහ ක්‍රියා පටිපාටි විස්තර කරන පුළුල් මාර්ගෝපදේශය. Tago.io UDP, MQTT, සහ COAP ප්‍රොටෝකෝල භාවිතා කරයි. දෝශ නිරාකරණ සහ නිතර අසන ප්‍රශ්න ඇතුළත් වේ.
පෙරview හොඳ කර්ම ග්‍රිඩ් බ්ලැන්කට් රහිත ගෙතුම් රටාව | ප්‍රිමියර් නූල්
ප්‍රිමියර් නූල් වෙතින් නොමිලේ හොඳ කර්ම ග්‍රිඩ් බ්ලැන්කට් ගෙතුම් රටාව බාගන්න. මෙම ව්‍යාපෘතියේ කර්ම නූල් වලින් ගෙතූ මිටර් හතරැස් 12 ක් ඇති අතර එය අතරමැදි ගෙතුම්කරුවන් සඳහා පරිපූර්ණයි. නූල් ලැයිස්තුව, මාපකය සහ සවිස්තරාත්මක උපදෙස් ඇතුළත් වේ.
පෙරview ටී-පරිමාණ NB-NHB ශ්‍රේණි නිරවද්‍ය ශේෂ තාක්ෂණික අත්පොත
T-Scale NB-NHB ශ්‍රේණියේ නිරවද්‍යතා ශේෂය සඳහා වන තාක්ෂණික අත්පොත, පිරිවිතර, ස්ථාපනය, ක්‍රියාකාරිත්වය, ක්‍රමාංකනය, RS-232 ප්‍රතිදානය, දෝෂ කේත සහ සමාගම් තොරතුරු ආවරණය කරයි.
පෙරview HWgroup NB-උපාංග පරිශීලක අත්පොත: NB-IoT සමඟ පරිසර අධීක්ෂණය
මෙම පරිශීලක අත්පොත NB-2x1Wire, NB-2xIn, NB-WLD, සහ NB-2xOut මාදිලි ඇතුළුව HWgroup NB-උපාංග නිෂ්පාදන පවුල පිළිබඳ සවිස්තරාත්මක තොරතුරු සපයයි. එය උපාංග විශේෂාංග, සැකසුම් ක්‍රියා පටිපාටි, දත්ත උඩුගත කිරීමේ වින්‍යාස කිරීම්, SensDesk.com සහ HWg-cloud.com ද්වාර සමඟ ඒකාබද්ධ කිරීම, තාක්ෂණික පිරිවිතර සහ යාන්ත්‍රික මානයන් ආවරණය කරයි. NB-IoT තාක්ෂණය භාවිතයෙන් දුරස්ථව පාරිසරික පරාමිතීන් නිරීක්ෂණය කරන්නේ කෙසේදැයි ඉගෙන ගන්න.
පෙරview නයිජල් බී. ප්‍රක්ෂේපක සඳහා ප්‍රති-කම්පන හුදකලා ඇඩැප්ටර නිර්මාණය - උපදෙස් සහ ඇණවුම් කිරීම
ප්‍රක්ෂේපක සඳහා නයිජල් බී. ඩිසයින් හි පේටන්ට් බලපත්‍රලාභී ප්‍රති-කම්පන හුදකලා ඇඩැප්ටර සඳහා සවිස්තරාත්මක උපදෙස් සහ ඇණවුම් මාර්ගෝපදේශය. ඔබේ උපකරණ අනවශ්‍ය කම්පනයෙන් ආරක්ෂා කරන්න.