1. හැඳින්වීම
The Tektronix AFG1022 Arbitrary Function Generator is a versatile instrument designed for generating various waveforms required in laboratory and testing environments. With a bandwidth of 25 MHz or 60 MHz and dual output channels, it provides an output amplitude ranging from 1 mVpp to 10 Vpp across its full bandwidth. This device offers a comprehensive set of features for waveform generation, making it a valuable tool for a wide range of applications.
ප්රධාන ලක්ෂණ ඇතුළත් වේ:
- Dual-channel operation with 25 MHz bandwidth.
- ප්රතිදානය amplitude from 1 mVpp to 10 Vpp.
- 14-bit vertical resolution and 1 µHz frequency resolution.
- 50 built-in arbitrary waveforms.
- Support for continuous, modulation, sweep, and burst modes.
- Dedicated 3.95-inch TFT LCD display for clear visualization.
- User-friendly front panel and menu navigation.
2 ආරක්ෂිත තොරතුරු
Before operating the Tektronix AFG1022, please read and understand all safety instructions to prevent injury and avoid damage to the instrument or other connected equipment. This device is designed for use by qualified personnel only.
සාමාන්ය ආරක්ෂණ පූර්වාරක්ෂාවන්:
- භූගත කිරීම: Always ensure the instrument is properly grounded. The power cord provided has a three-prong plug for this purpose. Do not defeat the grounding-type plug.
- බලශක්ති ප්රභවය: Connect the instrument to a power source that is within the specified voltage range (100-240V AC, 50/60 Hz). Verify the line selector switch on the rear panel is set correctly for your local voltage.
- වාතාශ්රය: Ensure proper ventilation around the instrument. Do not block ventilation openings. Overheating can cause damage.
- පරිසරය: Operate the instrument in a clean, dry environment. Avoid exposure to moisture, extreme temperatures, or corrosive gases.
- සේවා: Refer all servicing to qualified service personnel. Do not attempt to service the instrument yourself unless you are qualified to do so.
- කේබල් සහ සම්බන්ධක: Use only specified cables and connectors. Ensure all connections are secure before applying power.
- පිරිසිදු කිරීම: පිරිසිදු කිරීමට පෙර විදුලිය විසන්ධි කරන්න. මෘදු, වියළි රෙද්දක් භාවිතා කරන්න. දියර හෝ එයරෙසෝල් පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
3. පෙට්ටියේ ඇති දේ
Upon unpacking your Tektronix AFG1022 Arbitrary Function Generator, please verify that all the following items are included:
- Tektronix AFG1022 Arbitrary Function Generator Unit
- අනුකූලතා ප්රකාශය
- CD (containing software and documentation)
- පරිශීලක අත්පොත (මෙම ලේඛනය)
- Fuse (2 pieces, spare)
- Cables (3 pieces, including USB and BNC cables)
- ක්රමාංකන සහතිකය
- විදුලි රැහැන්
If any items are missing or damaged, please contact your Tektronix supplier or customer support immediately.
4. පිහිටුවීම
Follow these steps to set up your AFG1022 Arbitrary Function Generator for initial use.
4.1 ඉවත් කිරීම සහ පරීක්ෂා කිරීම
- Carefully remove the instrument and all accessories from the packaging.
- Inspect the instrument for any signs of physical damage that may have occurred during transit. If damage is found, contact your supplier.
- Retain the original packaging materials for future transport or storage.
4.2 බල සම්බන්ධතාවය
- Locate the power inlet on the rear panel of the AFG1022.
- තහවුරු කරන්න රේඛා වරණකය switch on the rear panel is set to the correct voltage for your region (110V AC or 220V AC). Adjust if necessary.
- Connect the provided power cord to the instrument's power inlet and then to a grounded AC power outlet.
4.3 ප්රතිදාන සම්බන්ධ කිරීම
- Identify the two output channels (Out1 and Out2) on the front panel. These are BNC connectors.
- Connect appropriate BNC cables from the desired output channel(s) to your test circuit or device under test.
- Ensure the impedance setting on the AFG1022 matches the impedance of your load (typically 50Ω or high impedance).
5. මෙහෙයුම් උපදෙස්
මෙම කොටස වැඩි කාලයක් ලබා දෙයිview of the basic operation of the Tektronix AFG1022. For detailed instructions on specific functions, refer to the comprehensive user manual provided on the included CD.
5.1 Powering On and Initial Screen
- උපකරණය ක්රියාත්මක කිරීමට ඉදිරිපස පුවරුවේ ඇති බල බොත්තම ඔබන්න.
- The display will show the Tektronix logo and then transition to the main waveform generation interface.
5.2 Basic Waveform Generation
The AFG1022 can generate various standard waveforms and arbitrary waveforms.
- Selecting Waveform Type: Use the dedicated buttons below the display (Sine, Square, Ramp, Pulse, Arb, Noise) to select the desired waveform.
- Setting Frequency: Use the numeric keypad and the rotary knob to input the desired frequency. The display will update in real-time.
- සැකසීම Amplitude and Offset: සකස් කරන්න amplitude (Vpp) and DC offset (V) using the corresponding soft keys and the rotary knob.
- ප්රතිදානය සක්රීය කිරීම: ඔබන්න සක්රිය/අක්රිය button for Channel 1 (Out1) or Channel 2 (Out2) to enable the waveform output. The button will illuminate when the output is active.
5.3 උසස් කාර්යයන්
- මොඩියුලේෂන්: ඔබන්න mod button to access modulation settings (AM, FM, PM, FSK, PWM).
- අතුගා දැමීම: Configure frequency sweeps by pressing the අතුගාන්න මෘදු යතුර.
- පිපිරීම: Generate burst waveforms by pressing the පිපිරෙනවා මෘදු යතුර.
- හිතුවක්කාර තරංග ආකෘති: The AFG1022 supports user-defined arbitrary waveforms. Refer to the full manual for instructions on creating and loading custom waveforms.
6. නඩත්තු කිරීම
Proper maintenance ensures the longevity and optimal performance of your Tektronix AFG1022.
6.1 පිරිසිදු කිරීම
- Always disconnect the power cord before cleaning the instrument.
- Use a soft, dry cloth to wipe the exterior surfaces. For stubborn dirt, a cloth lightly dampened with mild detergent and water may be used.
- Do not use abrasive cleaners, solvents, or strong chemicals, as these can damage the plastic parts and labels.
- Avoid spraying liquids directly onto the instrument.
6.2 ෆියුස් ප්රතිස්ථාපනය
If the instrument does not power on, check the fuse located in the power inlet on the rear panel. Ensure the replacement fuse matches the specified type and rating (e.g., 250V, 2A). Refer to the full manual for detailed instructions on fuse replacement.
6.3 ක්රමාංකනය
For continued accuracy, periodic calibration by qualified service personnel is recommended. Refer to the calibration certificate for the recommended calibration interval.
7. දෝශ නිරාකරණය
This section provides solutions to common issues you might encounter with your AFG1022. If the problem persists, contact Tektronix customer support.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| උපකරණය ක්රියාත්මක නොවේ. | No power, faulty power cord, blown fuse. | Check power cord connection. Verify power outlet. Check and replace fuse if necessary. Ensure line selector is correct. |
| No waveform output. | Output channel not enabled, incorrect amplitude/offset settings, faulty cable, incorrect load impedance. | Press the On/Off button for the desired channel. Verify amplitude and offset settings. Check BNC cable connections. Ensure load impedance matches instrument setting. |
| සංදර්ශකය හිස් හෝ නිශ්චල කර ඇත. | Software error, internal fault. | Power cycle the instrument (turn off, wait 10 seconds, turn on). If issue persists, contact support. |
| Incorrect waveform shape/frequency. | Incorrect settings, external interference. | Double-check all waveform parameters (frequency, amplitude, offset, modulation settings). Ensure proper shielding of cables. |
8. පිරිවිතර
The following table lists the key specifications for the Tektronix AFG1022 Arbitrary Function Generator. All specifications are typical unless otherwise noted.
| පරාමිතිය | වටිනාකම |
|---|---|
| මාදිලියේ නම | AFG1022 |
| කලාප පළල | 25 MHz |
| නාලිකා | ද්විත්ව නාලිකාව |
| ප්රතිදානය Amplitude | 1 mVpp සිට 10 Vpp දක්වා |
| සිරස් විභේදනය | 14-bit |
| සංඛ්යාත විභේදනය | 1 µHz |
| Built-in Waveforms | 50 Arbitrary Waveforms |
| ප්රදර්ශනය කරන්න | අඟල් 3.95 TFT LCD |
| බලශක්ති ප්රභවය | Electricity Powered |
| වෙළුමtage | 100-240V AC (selectable) |
| අයිතමයේ බර | කිලෝග්රෑම් 4.9 (රාත්තල් 10.8) |
| පැකේජ මානයන් | අඟල් 17.2 x 14 x 11.4 |
| නිෂ්පාදකයා | ටෙක්ට්රොනික්ස් |
| පළමු දිනය තිබේ | 15 ජූලි 2015 |
9. වගකීම් සහ සහාය
Tektronix products are designed for reliability and performance. For specific warranty terms and conditions applicable to your AFG1022, please refer to the warranty information provided with your purchase or visit the official Tektronix webඅඩවිය.
පාරිභෝගික සහාය:
If you require technical assistance, have questions about your instrument, or need to arrange for service, please contact Tektronix customer support. Support contact information can typically be found on the Tektronix webවෙබ් අඩවිය හෝ ඔබේ නිෂ්පාදනය සමඟ ඇතුළත් කර ඇති ලියකියවිලි වල.
When contacting support, please have your instrument's model number (AFG1022) and serial number ready. The serial number is located on the rear panel of the instrument.
For the latest information, drivers, software, and additional resources, please visit the official Tektronix webඅඩවිය: www.tek.com
