THERMOS Ultimate Flask (900ml) Instruction Manual

1. නිෂ්පාදන අවසන්view

The THERMOS Ultimate Flask (900ml) is designed for maximum temperature retention, keeping beverages hot or cold for up to 24 hours. Constructed with durable stainless steel, it features protective silicone rings for enhanced longevity. The flask remains cool to the touch with hot liquids and is sweat-proof with cold liquids. Its two-part stopper ensures a smooth flow of liquid, and the product is BPA-free.

Image 1: Key features of the THERMOS Ultimate Flask, including its two-part stopper for smooth pouring, 900ml capacity, durable stainless steel construction, double-wall insulation to prevent condensation and burns, and compatibility with cup holders.

• Vacuum Insulation Technology: Ensures maximum temperature retention for up to 24 hours, for both hot and cold beverages.
• කල් පවතින ඉදිකිරීම්: Features a stainless steel interior and exterior with protective silicone rings.
• සුවපහසුව සහ ආරක්ෂාව: Remains cool to the touch with hot liquids and is sweat-proof with cold liquids.
• Efficient Stopper: Equipped with a two-part stopper designed for smooth liquid flow.
• BPA-නිදහස්: Manufactured without Bisphenol A.

Image 2: The THERMOS Ultimate Flask being carried in a backpack, illustrating its suitability for outdoor use. Icons indicate its ability to keep contents hot for 24 hours and cold for 24 hours.

2. සැකසුම සහ පළමු භාවිතය

1. ඇසිරීම: Carefully remove the flask from its packaging. Inspect for any damage.
2. මූලික පිරිසිදු කිරීම: Before first use, wash all parts (flask body, stopper, and lid/cup) with warm soapy water. Rinse thoroughly and allow to air dry.
3. Pre-conditioning (Optional, Recommended):
   • සඳහා hot beverages, fill the flask with hot water (not boiling) for 5-10 minutes, then empty.
   • සඳහා cold beverages, fill the flask with cold water or ice for 5-10 minutes, then empty.
   This step helps maximize temperature retention.
4. පිරවීම: Fill the flask with your desired beverage, leaving a small space at the top to allow for the stopper.
5. Securing the Stopper: Insert the two-part stopper and twist clockwise until securely tightened to prevent leaks.
6. Attaching the Lid/Cup: Screw the outer lid/cup onto the flask body until firm.

රූපය 3: ඉදිරිපස view of the THERMOS Ultimate Flask, showing the main body, the two-part stopper, and the outer lid which doubles as a cup.

3. මෙහෙයුම් උපදෙස්

3.1 Pouring Beverages

1. Remove Outer Lid: Unscrew the outer lid (which can be used as a cup) from the flask.
2. Activate Stopper: Slightly twist the two-part stopper counter-clockwise. You will feel it loosen and see a small gap appear, allowing liquid to flow. Do not remove the stopper completely for pouring.
3. වත්: Tilt the flask to pour the beverage into the lid/cup or another container.
4. Close Stopper: After pouring, twist the stopper clockwise until it is fully tightened to seal the flask and maintain temperature.
5. Replace Outer Lid: Screw the outer lid back onto the flask.

3.2 ආරක්ෂිත පූර්වාරක්ෂාවන්

• කුප්පිය ඕනෑවට වඩා පුරවන්න එපා.
• Ensure the stopper and lid are securely fastened to prevent leaks, especially when transporting.
• Exercise caution when handling hot liquids. The contents will remain hot for an extended period.
• Keep out of reach of children when containing hot liquids.
• Do not use in microwave ovens, on stovetops, or in any type of oven.
• Do not use for carbonated beverages, as pressure buildup can cause the stopper to eject forcefully.

රූපය 4: ආපසු view of the THERMOS Ultimate Flask, highlighting the ergonomic design and protective silicone elements on the base and body.

4. නඩත්තුව සහ රැකවරණය

• පිරිසිදු කිරීම: Hand wash only. Do not place the flask or its components in a dishwasher. Use warm water and mild dish soap. For thorough cleaning, the stopper can be disassembled.
• වියළීම: ගන්ධය හෝ කෝණාකාර වැළැක්වීම සඳහා නැවත එකලස් කර ගබඩා කිරීමට පෙර සියලුම කොටස් සම්පූර්ණයෙන්ම වියළී ඇති බවට වග බලා ගන්න.
• ගබඩා: Store the flask with the stopper slightly loosened to allow air circulation, which helps prevent odors.
• උල්ෙල්ඛ වලින් වළකින්න: Do not use abrasive cleaners or scrubbers, as they can damage the finish.

5. දෝශ නිරාකරණය

Issue: Beverage not staying hot/cold for the stated duration.

විසඳුම: Ensure the flask was pre-conditioned with hot or cold water before filling. Verify that the stopper and lid are securely tightened. Extreme ambient temperatures can also affect retention.

Issue: Leakage from the flask.

විසඳුම: Check that the two-part stopper is fully tightened. Inspect the silicone seals on the stopper for any damage or misalignment. Ensure no debris is caught in the threads of the stopper or lid.

Issue: Unpleasant odor inside the flask.

විසඳුම: Thoroughly clean the flask with warm soapy water and a small amount of baking soda. Rinse well. Store with the stopper slightly open to allow air circulation.

6. පිරිවිතර

රූපය 5: පැත්ත view of the THERMOS Ultimate Flask, showcasing its overall form factor and branding.

7. වගකීම් සහ සහාය

The THERMOS Ultimate Flask comes with a වසර 5 ක වගකීමක්, covering manufacturing defects under normal use. For warranty claims, product support, or further inquiries, please refer to the official THERMOS webවෙබ් අඩවිය හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න.

You can visit the official THERMOS store for more information: THERMOS Store