හැඳින්වීම
This manual provides instructions for the safe and effective use of your ProMaster Camera Phone Tripod Mount Model 3421. Please read this manual thoroughly before use and retain it for future reference. This device is designed to securely attach smartphones to tripods or other mounting systems equipped with a standard 1/4"-20 screw.
නිෂ්පාදනය අවසන්view
The ProMaster Camera Phone Tripod Mount Model 3421 features an adjustable opening to accommodate various smartphone sizes and a durable metal 1/4"-20 female thread for universal compatibility with tripods and monopods.
රූපය 1: පැත්ත view of the ProMaster Camera Phone Tripod Mount, showing its compact design.
රූපය 2: ඉහළ view of the mount, illustrating the adjustable opening with a measurement scale and the 1/4"-20 female thread mount.
සැලසුම
- ට්රයිපොඩ් එකට අමුණන්න: Locate the 1/4"-20 female thread at the base of the phone mount. Screw the mount onto the 1/4"-20 male screw of your tripod or monopod until it is securely fastened. Do not overtighten.
- ස්මාර්ට් ජංගම දුරකථනය ඇතුළු කරන්න: Gently pull the top jaw of the mount upwards to open the adjustable grip. Carefully place your smartphone into the mount, ensuring it is centered and the jaws securely hold the device without obstructing buttons or ports. The mount accommodates phones with a minimum width of 2 inches and a maximum width of 3 3/4 inches.
- ස්ථාවරත්වය තහවුරු කරන්න: Once the phone is in place, ensure it is firmly held and does not wobble. Adjust the phone's position if necessary.
මෙහෙයුම් උපදෙස්
- Adjusting Phone Position: The mount allows for both vertical and horizontal phone orientation, depending on your tripod head's capabilities. Ensure the phone is balanced to prevent tipping.
- ආරක්ෂිත ග්රහණය: The spring-loaded mechanism provides a strong grip. Always check that your phone is fully seated and held firmly before leaving it unattended.
- Removing Smartphone: To remove your smartphone, gently pull the top jaw upwards to release the tension and carefully lift the phone out of the mount.
නඩත්තු කිරීම
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the mount. Avoid abrasive cleaners or solvents that could damage the material.
- ගබඩා: Store the mount in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
- පරීක්ෂාව: Periodically inspect the mount for any signs of wear or damage, especially the spring mechanism and the 1/4"-20 thread. Do not use if damaged.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Smartphone does not fit in the mount. | Smartphone dimensions exceed the mount's capacity. | Ensure your smartphone's width is between 2 inches and 3 3/4 inches. Remove bulky cases if necessary. |
| Mount feels unstable on the tripod. | Mount not securely attached to the tripod. | Tighten the mount onto the tripod's 1/4"-20 screw until firm. Check the tripod's stability as well. |
| Phone slips out of the mount. | Phone not properly seated or mount is damaged. | Ensure the phone is centered and fully gripped by the jaws. Inspect the spring mechanism for damage. If damaged, discontinue use. |
පිරිවිතර
රූපය 3: Dimensions of the ProMaster Camera Phone Tripod Mount.
- ආකෘතිය: 3421
- වෙළඳ නාමය: ප්රොමාස්ටර්
- ද්රව්ය: ලෝහ
- සවිකරන නූල්: Metal 1/4" - 20 female thread
- Minimum Opening: අඟල් 2 (සෙ.මී. 5.08)
- උපරිම විවෘත කිරීම: අඟල් 3 3/4 (සෙ.මී. 9.53)
- නිෂ්පාදන මානයන් (H x W x D): 2 5/8" x 2 3/16" x 1 1/4" (approx. 6.67 cm x 5.56 cm x 3.18 cm)
- අයිතමයේ බර: අවුන්ස 1.6 (ග්රෑම් 45.36)
- ගැළපෙන උපාංග: ස්මාර්ට්ෆෝන්
- බර සීමාව: 6.6 Pounds (3 kg) - Note: This refers to the maximum weight the mount itself can support, not the phone's weight.
වගකීම් සහ සහාය
For detailed warranty information, product registration, or technical support, please visit the official ProMaster webවෙබ් අඩවියෙන් හෝ ඔබ භාණ්ඩය මිලදී ගත් සිල්ලර වෙළෙන්දා අමතන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
ProMaster Official Webඅඩවිය: Amazon හි ProMaster වෙළඳසැල
