1. හැඳින්වීම
The ThermoPro TP-12 is a digital wireless thermometer designed to accurately monitor the internal temperature of your meat and the temperature of your oven or BBQ. With a remote range of up to 300 feet, this unit allows you to monitor your cooking from a distance, eliminating the need for constant supervision. It features dual probes, a timer, and various alarm functions to ensure your food is cooked perfectly every time.
This manual provides detailed instructions on how to set up, operate, and maintain your ThermoPro TP12 thermometer. Please read it thoroughly before first use.
2 ආරක්ෂිත තොරතුරු
- අවවාදයයි: Do not touch the stainless steel probes or wires with bare hands during or immediately after cooking, as they will be extremely hot. Always wear heat-resistant gloves.
- Keep the receiver and transmitter away from direct heat sources, open flames, or hot surfaces.
- Do not immerse the receiver or transmitter in water or place them in a dishwasher. They are not waterproof.
- The probes and wires are designed to withstand temperatures up to 716°F (380°C). Do not expose them to temperatures exceeding this limit.
- Ensure the probe cable is not pinched or damaged by oven doors or grill grates.
- දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
3. පැකේජ අන්තර්ගතය
ඔබගේ පැකේජයේ සියලුම අයිතම ඇති බව තහවුරු කරගන්න:
- 1 x ග්රාහක ඒකකය
- 1 x සම්ප්රේෂක ඒකකය
- 1 x Food Grade Stainless Steel Probe (6.5 inches)
- 1 x Oven/BBQ Stainless Steel Probe (3 inches)
- 4 x AAA බැටරි

Image: The ThermoPro TP12 package contents, showing the receiver and transmitter units, two stainless steel probes (one for food, one for oven/BBQ), and a metal clip for the oven probe.
4. නිෂ්පාදන සංරචක සහ විශේෂාංග

Image: The ThermoPro TP12 wireless thermometer system, displaying the receiver unit on the left with its large red display, the transmitter unit on the right, and the two stainless steel probes connected to the transmitter.
ග්රාහක ඒකකය
- සංදර්ශකය: Large LCD display showing food and BBQ/oven temperatures, timer, and alarm indicators.
- බොත්තම්:
- HI/HR: Adjusts high temperature setting for BBQ/oven, or sets hours for timer.
- LO/MIN: Adjusts low temperature setting for BBQ/oven, or sets minutes for timer.
- මාදිලිය/ආලෝකය: Switches between temperature setting mode and timer mode; activates backlight.
- සමමුහුර්ත කරන්න: Synchronizes receiver with transmitter.
- ආරම්භ කරන්න/නවත්වන්න: Starts or stops the timer.
- HI/CL: Adjusts high temperature setting for food.
- °F/°C: Toggles between Fahrenheit and Celsius.
- අනතුරු ඇඟවීම: Flashes and beeps when programmed temperature is reached or connection is lost.
සම්ප්රේෂක ඒකකය
- සංදර්ශකය: Small LCD display showing current probe temperatures.
- Probe Jacks: Two ports for connecting the food and oven/BBQ probes.
- බල බොත්තම: සක්රිය / අක්රිය ස්විචය.
- වයර් ස්ථාවරය: Integrated wire stand for tabletop use or hanging on an oven door.
පරීක්ෂණ
- ආහාර පරීක්ෂණය: 6.5-inch food grade stainless steel probe with a step-down tip for accurate and fast temperature readings.
- Oven/BBQ Probe: 3-inch stainless steel probe for monitoring ambient temperatures.
- කේබල්: 40-inch stainless steel mesh cable, designed to withstand high temperatures.

රූපය: සමීප ඡායාරූපයක් view of the 6.5-inch food grade stainless steel probe, highlighting its step-down tip design for improved accuracy and speed in temperature measurement.
5. සැකසුම් උපදෙස්
- බැටරි ඇතුළු කරන්න:
- Open the battery compartment on the back of both the receiver and transmitter units.
- Insert 2 AAA batteries into each unit, ensuring correct polarity (+/-).
- බැටරි මැදිරි ආරක්ෂිතව වසා දමන්න.

Image: The ThermoPro TP12 receiver and transmitter units, illustrating the battery compartment location and icons representing the receiver's flash and beep alarm, dual temperature monitoring, and the inclusion of 4 AAA batteries.
- පරීක්ෂණ සම්බන්ධ කරන්න:
- Plug the food probe into the "FOOD" jack on the transmitter.
- Plug the oven/BBQ probe into the "BBQ" jack on the transmitter.
- බල ගැන්වීම:
- Slide the ON/OFF switch on the back of the transmitter to the "ON" position.
- The transmitter's display will show the current temperatures from the probes.
- The receiver will automatically synchronize with the transmitter. If not, press and hold the "SYNC" button on the receiver for 3 seconds.
6. මෙහෙයුම් උපදෙස්
6.1 Setting Temperature Alarms
- පරීක්ෂණය තෝරන්න: Press the "MODE/LIGHT" button on the receiver to cycle through "FOOD" temperature setting, "BBQ" high temperature setting, and "BBQ" low temperature setting.
- උෂ්ණත්වය සකස් කරන්න:
- For "FOOD" temperature, press "HI/CL" to increase the target temperature.
- For "BBQ" high temperature, press "HI/HR" to increase the target temperature.
- For "BBQ" low temperature, press "LO/MIN" to increase the target temperature.
- The temperature will cycle back to the minimum after reaching the maximum.
- සැකසීම තහවුරු කරන්න: The setting will automatically save after a few seconds of inactivity, or you can press "MODE/LIGHT" again to move to the next setting.
- When the probe temperature reaches the set alarm temperature, the receiver will flash and beep. Press any button to stop the alarm.

Image: The ThermoPro TP12 system in use, showing the receiver displaying both meat and oven temperatures, with the transmitter placed near an oven, demonstrating its ability to monitor two temperatures concurrently.
6.2 ටයිමරය භාවිතා කිරීම
- ටයිමර් ප්රකාරය ඇතුළු කරන්න: Press the "MODE/LIGHT" button repeatedly until "TIMER" is displayed on the receiver.
- Set Countdown Timer:
- Press "HI/HR" to set hours.
- Press "LO/MIN" to set minutes.
- Press "START/STOP" to begin the countdown.
- To pause, press "START/STOP" again. To reset, press and hold "START/STOP" for 3 seconds.
- ටයිමරය ගණන් කරන්න: If the timer is set to 00:00 and "START/STOP" is pressed, the timer will begin counting up.

Image: The ThermoPro TP12 receiver unit demonstrating its countdown and count-up timer capabilities, showing how the display changes to indicate hours and minutes for timing cooking processes.
6.3 උෂ්ණත්ව ඒකක මාරු කිරීම (°F/°C)
Press the "°F/°C" button on the receiver to toggle between Fahrenheit and Celsius temperature displays.
6.4 Remote Range and Signal Loss
The ThermoPro TP12 offers a remote range of up to 300 feet in open areas. Factors such as walls, obstacles, and electromagnetic interference can reduce this range.
If the receiver loses connection with the transmitter, it will alert you with an alarm. Move the receiver closer to the transmitter to re-establish the connection.

Image: The ThermoPro TP12 in an outdoor grilling scenario, illustrating its 300-foot remote range capability, with the user holding the receiver unit while the transmitter is near the grill.
7. නඩත්තුව සහ රැකවරණය
- පිරිසිදු කිරීමේ පරීක්ෂණ: Wash the stainless steel probes with hot soapy water after each use. Rinse thoroughly and dry completely. Do not immerse the probe connectors or wires in water.
- Cleaning Units: Wipe the receiver and transmitter units with a damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න හෝ ඒවා ජලයේ ගිල්වන්න එපා.
- ගබඩා: Store the thermometer in a dry place at room temperature when not in use. Remove batteries if storing for extended periods to prevent leakage.
- පරීක්ෂණ සත්කාර: Avoid bending or kinking the probe cables excessively, as this can damage the internal wiring.
8. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| No display on receiver/transmitter. | මිය ගිය හෝ වැරදි ලෙස ඇතුළත් කළ බැටරි. | නිවැරදි ධ්රැවීයතාව සහතික කරමින් බැටරි නව AAA බැටරි සමඟ ප්රතිස්ථාපනය කරන්න. |
| Receiver not syncing with transmitter. | Out of range; interference; transmitter off. | Move receiver closer to transmitter. Ensure transmitter is on. Press and hold SYNC button on receiver. |
| සාවද්ය උෂ්ණත්ව කියවීම්. | Probe not fully inserted; damaged probe/cable. | Ensure probe is fully inserted into the food/oven. Check probe cable for visible damage. Contact customer support for probe replacement if damaged. |
| එලාම් නාද නොවේ. | Volume too low; alarm disabled; battery low. | Check receiver settings. Replace batteries. |
| "---" or "LLL" on display. | Probe not connected or damaged; temperature out of range. | Ensure probe is securely connected. If connected, probe may be damaged or temperature is below 32°F (0°C). |
| "HHH" on display. | පරාසයෙන් පිටත උෂ්ණත්වය. | Temperature is above 572°F (300°C). Remove probe from extreme heat. |
9. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| උෂ්ණත්ව පරාසය | 32°F සිට 572°F (0°C සිට 300°C) |
| උෂ්ණත්ව නිරවද්යතාව | 1.8 1 ° F (± 32 ° C) 212 සිට 0 ° F (100 සිට XNUMX ° C) දක්වා |
| Food Probe Length | 6.5 inches (food grade stainless steel) |
| Oven/BBQ Probe Length | 3 inches (stainless steel) |
| කේබල් දිග | 40 inches (stainless steel mesh) |
| දුරස්ථ පරාසය | අඩි 300 දක්වා (දසුන් රේඛාව) |
| Receiver Display Size | අඟල් 1.5 x 1.3 (38 x 34 මි.මී.) |
| Transmitter Display Size | අඟල් 1.0 x 0.5 (26 x 13.5 මි.මී.) |
| Probe & Wire Heat Resistance | 716°F (380°C) දක්වා |
| සහතික | FCC certified, CE certified, ROHS, FDA approved probe |
| බලශක්ති ප්රභවය | 4 x AAA batteries (2 for receiver, 2 for transmitter) |
10. වගකීම් සහ සහාය
ThermoPro provides a 1-year warranty for this product from the date of purchase. By registering your product after purchase, you can receive an extended 3-year warranty.
Additionally, ThermoPro offers a lifetime warranty on their sensor probes. If your probe experiences temperature reading problems, a brand-new replacement probe will be provided free of charge.
For warranty claims, technical support, or any questions regarding your ThermoPro TP12 thermometer, please contact ThermoPro Customer Service:
- දුරකථනය: 877-515-7797
- Webඅඩවිය: Refer to the official ThermoPro webනවතම සම්බන්ධතා තොරතුරු සහ සහාය සම්පත් සඳහා අඩවිය.
Please have your model number (TP12) and purchase information ready when contacting support.





