1. නිෂ්පාදන අවසන්view
The DSO138 is engineered as a training oscilloscope kit, emphasizing fundamental oscilloscope functions for straightforward assembly and operation. It incorporates a Cortex-M3 ARM processor (STM32F103C8) and a 2.4-inch TFT LCD, providing clear waveform visualization. This specific 13803K kit features pre-soldered Surface Mount Device (SMD) components and a pre-programmed Microcontroller Unit (MCU), which simplifies the initial assembly process.
2. සැකසීම සහ එකලස් කිරීම
While the SMD components are pre-soldered and the MCU is pre-programmed, the assembly of through-hole components and general soldering are still required for other parts of the kit. Please refer to the detailed assembly instructions and schematics provided with your physical kit for precise, step-by-step guidance.
බල සැපයුම් අවශ්යතාවය: A 9V DC power supply is essential for the operation of the DSO138 and is not included with this kit. Ensure that the power supply you use is compatible with the device's specifications.
Figure 2.1: All components included in the JYE DSO 138 DIY KIT 13803K.
Figure 2.2: The assembled circuit board and display module of the DSO 138 kit.
Video 2.1: This video demonstrates general soldering techniques for DIY kits. While it features a different mini oscilloscope kit, the soldering principles are applicable to the DSO 138 kit assembly.
3. මෙහෙයුම් උපදෙස්
The DSO138 provides essential oscilloscope functionalities for signal analysis.
ප්රධාන ලක්ෂණ:
- ප්රතිසම කලාප පළල: 0 - 200KHz (අඟල් 100)
- Sampලිං අනුපාතය: 1Msps max
- සංවේදීතාව: 10mV/Div - 5V/Div
- සිරස් විභේදනය: 12-bit
- කාල පදනම: 10us/Div - 500s/Div
- වාර්තා දිග: ලකුණු 1024 යි
- පරීක්ෂණ සංඥා: Built-in 1KHz/3.3V test signal for calibration and testing
- රඳවා ගැනීමේ කාර්යය: Waveform frozen (HOLD) function available for detailed analysis
Connecting and Displaying Waveforms:
Connect your signal source to the input BNC connector. Utilize the onboard controls to adjust the vertical sensitivity (V/Div) and timebase (s/Div) settings. These adjustments are crucial for properly scaling and displaying the waveform on the 2.4-inch TFT LCD in real-time.
Figure 3.1: The DSO 138 digital oscilloscope actively displaying a waveform from an external source.
රූපය 3.2: සවිස්තරාත්මක view of the DSO 138's 2.4-inch TFT LCD, showing a clear sine wave display.
Video 3.1: This video demonstrates various waveform measurements and probe calibration on a '138 Pro' model. While not the exact DSO 138 DIY KIT, it illustrates general oscilloscope usage and measurement principles that are applicable.
4. නඩත්තු කිරීම
To ensure the longevity and optimal performance of your DSO138 oscilloscope, follow these maintenance guidelines:
- පිරිසිදු කිරීම: උපාංගය පිරිසිදුව හා දූවිලි වලින් තොරව තබා ගන්න. පිරිසිදු කිරීම සඳහා මෘදු වියළි රෙද්දක් භාවිතා කරන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා කිරීමෙන් වළකින්න.
- පාරිසරික තත්ත්වයන්: Do not expose the oscilloscope to extreme temperatures, high humidity, or direct sunlight. Store it in a dry, stable environment.
- හැසිරවීම: භෞතික හානි වළක්වා ගැනීම සඳහා උපාංගය ප්රවේශමෙන් හසුරුවන්න. බිම හෙළීමෙන් හෝ දැඩි බලපෑම්වලට ලක්වීමෙන් වළකින්න.
- වෙනස් කිරීම්: Do not attempt to modify the internal circuitry beyond the intended assembly steps. Unauthorized modifications can void any potential warranty and may damage the device.
5. දෝශ නිරාකරණය
This section addresses common issues you might encounter with your DSO138 kit.
පොදු ගැටළු:
- සංදර්ශකය හෝ බලය නැත: Ensure the 9V DC power supply is correctly connected and functioning. If the kit was recently assembled, double-check all power-related connections and soldering points for continuity and shorts.
- Distorted or Unstable Waveforms: Verify that the probe is securely connected and that its 1X/10X switch (if present) is set appropriately for your measurement. Adjust the vertical sensitivity (V/Div) and timebase (s/Div) settings on the oscilloscope to properly scale the waveform.
- Component Overheating: If any component, such as a diode (e.g., D2), becomes excessively hot during operation, immediately disconnect power. This often indicates a short circuit, an incorrectly installed component, or a faulty part. Consult the provided schematic for correct component placement and values.
For more detailed troubleshooting steps, refer to the comprehensive troubleshooting guide and schematic included with your kit. If issues persist, contact JYETech customer support for further assistance.
6. පිරිවිතර
Detailed technical specifications for the JYETech DSO 138 DIY KIT 13803K:
- ප්රතිසම කලාප පළල: 0 - 200KHz (අඟල් 100)
- Sampලිං අනුපාතය: 1Msps max
- සංවේදීතාව: 10mV/Div - 5V/Div
- සිරස් විභේදනය: 12-bit
- කාල පදනම: 10us/Div - 500s/Div
- වාර්තා දිග: ලකුණු 1024 යි
- සංදර්ශකය: 2.4-inch TFT LCD (320 x 240 dot matrix, 262K colors)
- සකසනය: Cortex-M3 ARM (STM32F103C8)
- පරීක්ෂණ සංඥා: Built-in 1KHz/3.3V
- බල සැපයුම: 9V DC (ඇතුළත් නොවේ)
- මානයන් (නිෂ්පාදනය): ආසන්න වශයෙන් 4 x 3 x 1 අඟල්
- අයිතමයේ බර: ආසන්න වශයෙන් 3.99 අවුන්ස
7. වගකීම් සහ පාරිභෝගික සහාය
For specific warranty terms, conditions, and to access technical support, please refer to the official documentation provided with your JYETech DSO 138 DIY KIT 13803K or visit the official JYETech website. Contact information for customer service is typically found within the product packaging or on the manufacturer's webඅඩවිය.
