හැඳින්වීම
This manual provides essential information for the proper installation, operation, and maintenance of your Kidde Carbon Monoxide (CO) Detector, Model KN-COP-DP-10YL. This device is designed to detect carbon monoxide gas and alert occupants to potentially dangerous CO levels. Please read this manual thoroughly before using the detector and retain it for future reference.
Image: Kidde Carbon Monoxide Detector, Model KN-COP-DP-10YL.
ආරක්ෂිත තොරතුරු
Carbon monoxide is an invisible, odorless, and tasteless gas that can be fatal. This detector is designed to provide an early warning of CO presence. However, it is crucial to understand its limitations:
- This device is not a substitute for smoke detectors. Install both smoke and CO detectors in your home.
- CO detectors may not awaken all individuals. Ensure all household members are aware of the alarm sound and emergency procedures.
- Do not block the detector's vents.
- මෙම අත්පොතෙහි උපදෙස් දී ඇති පරිදි අනාවරකය නිතිපතා පරීක්ෂා කරන්න.
- අනතුරු ඇඟවීමක් ඇති වුවහොත්, වහාම පරිශ්රයෙන් ඉවත් වී හදිසි සේවා අමතන්න.
සැලසුම
The Kidde Carbon Monoxide Detector is designed for easy plug-in installation.
- Unpack the Detector: උපාංගය එහි ඇසුරුම් වලින් ප්රවේශමෙන් ඉවත් කරන්න.
- ස්ථානයක් තෝරන්න: Select a standard 120V AC power outlet. For optimal detection, install the CO detector on every level of your home and near sleeping areas. Avoid placing it near fuel-burning appliances, in direct sunlight, or in areas with high humidity or extreme temperatures.
- ප්ලග් ඉන්: Insert the detector into the chosen wall outlet. Ensure it is securely plugged in.
- මූලික බලගැන්වීම: Upon plugging in, the digital LED display will illuminate, and the unit will perform a self-test. It may display '888' and then '0' (zero parts per million, PPM) indicating normal operation.
- බැටරි උපස්ථ: This model features a 10-year lithium battery backup, providing continuous protection during power outages. The battery is sealed and not user-replaceable.
මෙහෙයුම් උපදෙස්
Understanding your CO detector's indicators and functions is vital.
ඩිජිටල් LED සංදර්ශකය
The digital LED display shows the level of carbon monoxide the alarm is sensing in parts per million (PPM). It updates every 15 seconds. A reading of '0' indicates no detectable CO.
ටෙස්ට් / නිශ්ශබ්ද බොත්තම
The Test/Hush button is located on the front of the unit.
- පරීක්ෂා කිරීම: Press and hold the Test/Hush button for a few seconds. The alarm will sound, and the display will show '888' to confirm the unit is functioning correctly. Release the button to stop the test.
- Hushing: If the alarm sounds due to a non-emergency event (e.g., cooking fumes), press the Test/Hush button to temporarily silence the alarm for approximately 8 minutes. The unit will return to normal monitoring after the hush period.
උපරිම මට්ටමේ මතකය
The detector records the highest CO level detected since the last reset or test. To view the peak level, press the 'Peak Level' button. The display will show the highest PPM recorded. Press again to return to current CO level display.
අනතුරු ඇඟවීමේ ඇඟවීම
When carbon monoxide is detected at dangerous levels, the unit will sound an 85-decibel alarm and the digital display will show the CO concentration in PPM.
නඩත්තු කිරීම
Proper maintenance ensures the longevity and effectiveness of your CO detector.
- නිතිපතා පරීක්ෂණ: Test your CO detector weekly by pressing the Test/Hush button.
- පිරිසිදු කිරීම: Clean the detector regularly to prevent dust and debris from obstructing the sensor. Use a soft, damp cloth to wipe the exterior. Do not use cleaning solvents or sprays directly on the unit.
- බැටරි: The 10-year lithium battery is sealed and designed to last the life of the alarm. It is not user-replaceable. When the battery is low or at the end of its life, the unit will chirp and indicate a service requirement.
දෝෂගවේෂණය
If your CO detector is not functioning as expected, refer to the following common issues and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Alarm sounds intermittently or continuously. | High CO levels detected. | Evacuate immediately and call emergency services. Do not re-enter until cleared by professionals. |
| Unit chirps every 30-60 seconds. | Low battery or end-of-life warning. | The sealed battery is nearing its end of life. Replace the entire unit. |
| Digital display shows 'ERR' or other error codes. | අභ්යන්තර වරද. | Unplug the unit for 30 seconds and plug it back in. If the error persists, replace the unit. |
| No display or power. | No AC power or unit malfunction. | Check the power outlet. If power is present and the unit still has no display, replace the unit. |
පිරිවිතර
- ආදර්ශ අංකය: KN-COP-DP-10YL
- කොටස අංකය: 900-0280
- බලශක්ති ප්රභවය: 120V AC (Plug-in) with 10-year sealed lithium battery backup
- සංවේදක වර්ගය: විද්යුත් රසායනික
- Alarm Loudness: 85 decibels at 10 feet
- මෙහෙයුම් උෂ්ණත්වය: 40°F (4.4°C) සිට 100°F (37.8°C)
- මෙහෙයුම් ආර්ද්රතාවය: 10-95% ඝනීභවනය නොවන
- නිෂ්පාදන මානයන්: 1.5"D x 3"W x 5.6"H
- අයිතමයේ බර: රාත්තල් 0.75 (අවුන්ස 12)
- සහතික: UL ලැයිස්තුගත කර ඇත
වගකීම් සහ සහාය
This Kidde Carbon Monoxide Detector comes with a 10-year limited manufacturer's warranty on the alarm only. The warranty period begins when the alarm is powered on. If the power-on date is unknown, it should be assumed that replacement is needed after 10 years from the manufacturing date.
For technical support, warranty claims, or further assistance, please refer to the contact information provided on the product packaging or visit the official Kidde webඅඩවිය.