Scheppach HS100S Table Saw User Manual

1. නිෂ්පාදන අවසන්view

The Scheppach HS100S table saw is a powerful and versatile tool designed for both DIY enthusiasts and professionals. It features a robust 2000W motor and a 250mm carbide blade, capable of handling various cutting tasks with precision.

This model includes a sturdy stand, two table extensions for increased workpiece support, and a convenient crank for adjusting blade height and tilt. It also comes equipped with an angle guide and a parallel guide to ensure accurate cuts.

Figure 1.1: The Scheppach HS100S Table Saw, showing its main components and the included saw blade.

2. ආරක්ෂිත උපදෙස්

Always prioritize safety when operating power tools. Read and understand all safety warnings and instructions before using the Scheppach HS100S table saw. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

2.1 සාමාන්‍ය ආරක්ෂණ අනතුරු ඇඟවීම්

• වැඩ ප්රදේශයේ ආරක්ෂාව: වැඩ කරන ප්‍රදේශය පිරිසිදුව හා හොඳින් ආලෝකමත්ව තබා ගන්න. අවුල් සහගත හෝ අඳුරු ප්‍රදේශ අනතුරු වලට ආරාධනා කරයි. දැවෙන ද්‍රව, වායූන් හෝ දූවිලි වැනි පුපුරන සුලු වායුගෝලයන් තුළ බල මෙවලම් ක්‍රියාත්මක නොකරන්න.
• විදුලි ආරක්ෂාව: බල මෙවලම් පේනු අලෙවිසැලට ගැළපිය යුතුය. කිසි විටෙකත් ප්ලග් එක කිසිදු ආකාරයකින් වෙනස් නොකරන්න. වැසි හෝ තෙත් තත්වයන්ට බල මෙවලම් නිරාවරණය නොකරන්න.
• පුද්ගලික ආරක්ෂාව: Always wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and dust masks. Do not wear loose clothing or jewelry. Keep hair, clothing, and gloves away from moving parts.
• මෙවලම් භාවිතය සහ රැකවරණය: බල මෙවලමට බල නොකරන්න. ඔබගේ යෙදුම සඳහා නිවැරදි බල මෙවලම භාවිතා කරන්න. කිසියම් ගැලපීමක් කිරීමට, උපාංග වෙනස් කිරීමට හෝ බල මෙවලම් ගබඩා කිරීමට පෙර බල ප්‍රභවයෙන් ප්ලග් එක විසන්ධි කරන්න.

2.2 Specific Table Saw Safety

• Always use the blade guard and splitter when operating the saw.
• Ensure the workpiece is firmly supported and guided. Use push sticks for narrow cuts.
• Never reach over or behind the rotating saw blade.
• Maintain a clear path for the workpiece and avoid cross-cutting freehand.
• Ensure the saw is stable. The HS100S features a stable base frame and non-slip rubber feet for high stability.

Figure 2.1: The table saw's stable base frame and non-slip rubber feet ensure high stability during operation.

3. සැකසීම සහ එකලස් කිරීම

Before operating the table saw, proper assembly and setup are crucial for safety and performance. Follow these steps carefully.

3.1 ඉවත් කිරීම සහ පරීක්ෂා කිරීම

1. ඇසුරුම්කරණයෙන් සියලුම සංරචක ප්රවේශමෙන් ඉවත් කරන්න.
2. Inspect all parts for any damage that may have occurred during shipping. Do not use the tool if any parts are damaged.
3. Verify that all listed components are present: main saw unit, stand components, two table extensions, saw blade, blade guard, cross-cut gauge, parallel guide, and assembly hardware.

3.2 ස්ථාවරය එකලස් කිරීම

Assemble the metal stand according to the diagrams provided in the separate assembly guide. Ensure all bolts are securely tightened for maximum stability.

3.3 Mounting the Saw Unit

1. Carefully place the main saw unit onto the assembled stand.
2. Secure the saw unit to the stand using the provided bolts and nuts.

3.4 Installing Table Extensions

Attach the two table extensions to the left and right sides of the main table. These extensions significantly increase the working surface, allowing for easier processing of larger workpieces.

Figure 3.1: The table extensions on both sides allow for processing of larger workpieces.

3.5 Blade Installation and Guard Attachment

1. කියත බල ප්‍රභවයෙන් විසන්ධි කර ඇති බවට වග බලා ගන්න.
2. Follow the instructions for installing the 250mm carbide saw blade.
3. Attach the saw blade guard securely over the blade. This guard is essential for safety and also allows for dust extraction.

4. මෙහෙයුම් උපදෙස්

This section details the proper procedures for operating your Scheppach HS100S table saw.

4.1 බල සම්බන්ධතාවය

Connect the saw to a 240 Volt AC power supply. Ensure the power outlet is properly grounded.

4.2 Adjusting Blade Height and Tilt

The saw features a combined handwheel for adjusting both the blade height and tilt angle. The maximum cutting height at 90 degrees is 85mm, and at 45 degrees, it is 65mm.

• Turn the handwheel to raise or lower the blade for the desired cutting depth.
• Use the tilt mechanism to set the blade angle for bevel cuts (up to 45 degrees).

Figure 4.1: Diagram illustrating maximum cutting heights at 90° (85mm) and 45° (65mm), and the ergonomic table height of 830mm.

Figure 4.2: The HS100S can effortlessly cut soft and hardwood up to a maximum height of 85mm.

4.3 Using the Guides

• සමාන්තර මාර්ගෝපදේශය: Use the parallel guide for rip cuts to ensure straight and consistent widths. Secure it firmly before cutting.
• Cross-Cut Gauge: The cross-cut gauge is used for accurate cross-cuts and miter cuts. Adjust the angle as needed and secure the workpiece against the fence.

රූපය 4.3: සමීප රූපය view of the cross-cut gauge for precise angle cuts.

4.4 දූවිලි නිස්සාරණය

The machine allows for direct dust extraction from the housing or the saw blade guard. Connecting a suitable dust extractor will significantly reduce dust in the work area, promoting a cleaner and safer environment.

Figure 4.4: The machine can be connected to a dust extractor at the housing or blade guard for low-dust operation.

5. නඩත්තු කිරීම

Regular maintenance ensures the longevity and safe operation of your table saw. Always disconnect the power supply before performing any maintenance.

5.1 පිරිසිදු කිරීම

• After each use, clean sawdust and debris from the table surface, blade guard, and motor housing.
• Use a brush or compressed air to remove dust from ventilation openings.
• සැර රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ පිරිසිදුකාරක භාවිතා නොකරන්න.

5.2 තල රැකවරණය

• Regularly inspect the saw blade for sharpness and damage. A dull blade can cause kickback and poor cut quality.
• ගෙවී ගිය හෝ හානි වූ තල වහාම ප්‍රතිස්ථාපනය කරන්න.
• සුදුසු තල පිරිසිදු කරන්නෙකු භාවිතයෙන් තලයෙන් දුම්මල සහ තාරතාව පිරිසිදු කරන්න.

5.3 ලිහිසි කිරීම

Periodically lubricate moving parts such as the blade height adjustment mechanism and tilt mechanism with a light machine oil to ensure smooth operation.

6. දෝශ නිරාකරණය

මෙම කොටස ඔබේ මේස කියත සමඟ ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සඳහා විසඳුම් සපයයි.

7. තාක්ෂණික පිරිවිතර

8. වගකීම් සහ සහාය

The Scheppach HS100S table saw comes with a limited warranty. Please refer to the separate warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.

For technical support, spare parts, or warranty claims, please contact Scheppach customer service. Contact information can typically be found on the Scheppach official webවෙබ් අඩවිය හෝ ඔබගේ මිලදී ගැනීමේ ලියකියවිලි මත.