1. හැඳින්වීම
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Antari S-100X Artificial Snow Machine. Please read this manual thoroughly before operating the device to ensure proper function and to prevent damage or injury. Keep this manual for future reference.
රූපය 1: කෝණික view of the Antari S-100X snow machine, showing the output nozzle, fluid reservoir, and carrying handle.
2 ආරක්ෂිත තොරතුරු
Always observe the following safety precautions to reduce the risk of electric shock, fire, or personal injury:
- සියලුම උපදෙස් කියවන්න: Before operating the machine, read and understand all safety and operating instructions.
- භූගත කිරීම: This unit must be properly grounded. Connect only to a grounded power outlet.
- විදුලි රැහැන්: Do not damage or modify the power cord. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service agent.
- දියර වර්ගය: Use only Antari brand snow fluid. Using other fluids may damage the machine and void the warranty.
- වාතාශ්රය: යන්ත්රය වටා ප්රමාණවත් වාතාශ්රයක් සහතික කරන්න. වාතාශ්රය විවරයන් අවහිර නොකරන්න.
- තෙතමනය: Do not expose the machine to rain or moisture. Do not operate in wet conditions.
- ළමුන් සහ සුරතල් සතුන්: Keep the machine out of reach of children and pets.
- නඩත්තු: සියලුම සේවා සුදුසුකම් ලත් සේවා නිලධාරීන් වෙත යොමු කරන්න. ඒකකය ඔබම අලුත්වැඩියා කිරීමට උත්සාහ නොකරන්න.
- ස්ථානගත කිරීම: Place the machine on a stable, level surface. Do not operate on an unstable surface.
- Output Nozzle: Do not obstruct the output nozzle. Keep a safe distance from the nozzle during operation.
3. පිහිටුවීම
3.1 ඇසිරීම
Carefully remove the snow machine from its packaging. Inspect the unit for any signs of damage during transit. If damage is found, contact your dealer immediately.
3.2 ස්ථානගත කිරීම
Position the snow machine on a flat, stable surface. Ensure there is sufficient space around the unit for proper ventilation. Do not place the machine directly on carpet or other soft materials that could block air vents. Ensure the output nozzle is directed away from people and sensitive equipment.
3.3 Filling the Fluid Reservoir
- Unscrew the cap from the fluid reservoir.
- Carefully pour Antari brand snow fluid into the reservoir. Do not overfill.
- Securely replace the cap on the fluid reservoir.
- Ensure the fluid hose inside the reservoir is fully submerged in the fluid.
Figure 2: Rear-angled view of the Antari S-100X snow machine, showing the fluid reservoir and power input area.
3.4 බල සම්බන්ධතාවය
Connect the power cord to a grounded electrical outlet with the correct voltage. Refer to the specifications section for voltagඊ අවශ්යතා.
4. මෙහෙයුම් උපදෙස්
4.1 බල ගැන්වීම
Flip the main power switch to the 'ON' position. The machine will begin its warm-up cycle. The indicator light (if present) will illuminate, typically red, during this phase.
4.2 Warm-up Time
Allow approximately 5-7 minutes for the machine to reach its optimal operating temperature. The indicator light will change color (e.g., green) or turn off when the machine is ready to produce snow.
4.3 Activating Snow Effect
Once the machine is ready, use the integrated control or optional remote control (if applicable) to activate the snow output. Press and hold the button to produce snow. Release the button to stop.
Figure 3: The Antari S-100X snow machine in operation, emitting artificial snow against a dark background.
4.4 බලය අක්රිය කිරීම
After use, turn the main power switch to the 'OFF' position. Disconnect the power cord from the outlet. Allow the machine to cool down completely before storing.
5. නඩත්තු කිරීම
5.1 පිරිසිදු කිරීම
Regularly clean the exterior of the machine with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure all ventilation openings are free from dust and debris.
5.2 Fluid Storage
If the machine will not be used for an extended period, drain any remaining snow fluid from the reservoir. Store snow fluid in a cool, dark place, away from direct sunlight and extreme temperatures. Always use fresh fluid for optimal performance.
5.3 Nozzle Cleaning
If snow output appears weak or inconsistent, the nozzle may be partially clogged. With the machine unplugged and cooled, gently clean the nozzle opening with a small brush or compressed air. Do not insert sharp objects into the nozzle.
6. දෝශ නිරාකරණය
This section addresses common issues you might encounter with your Antari S-100X snow machine.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| බලය නැත | Power cord not connected; Power outlet faulty; Main switch off | Check power cord connection; Test outlet with another device; Ensure main switch is ON. |
| හිම ප්රතිදානය නැත | No fluid in reservoir; Machine not warmed up; Nozzle clogged; Pump malfunction | Fill reservoir with fluid; Wait for warm-up indicator; Clean nozzle (see 5.3); Contact service if pump suspected. |
| Weak snow output | Low fluid level; Partially clogged nozzle; Incorrect fluid type | Refill fluid; Clean nozzle; Ensure only Antari snow fluid is used. |
| යන්ත්රය අධික ලෙස රත් වේ | Blocked ventilation; Prolonged continuous operation | Ensure clear ventilation; Allow machine to cool down periodically. |
7. පිරිවිතර
- ආකෘතිය: S-100X (also known as S-100II)
- අයිතමයේ බර: රාත්තල් 28.6 කි
- පැකේජ මානයන්: අඟල් 24.02 x 16.14 x 15.35
- ASIN: B01745SSKC
- ද්රව්ය වර්ගය: Cotton (referring to internal components or packaging)
- වර්ණ නම: අළු
- මුලින්ම ලබා ගත හැකි: 9 මාර්තු 2015
8. වගකීම් සහ සහාය
The Antari S-100X Artificial Snow Machine comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or replacement parts, please contact your authorized Antari dealer or the manufacturer directly. Do not attempt to service the unit yourself, as this may void your warranty.
