Eurolite THA-250F LED Theater Spot

1. හැඳින්වීම

This manual provides essential information for the safe and efficient operation of your Eurolite THA-250F LED Theater Spot. Please read this manual thoroughly before initial operation to ensure proper use and to prevent damage to the device or injury to yourself. Keep this manual for future reference.

The Eurolite THA-250F is a powerful 250W COB LED lighting fixture designed for indoor use, offering versatile dimming and focusing capabilities suitable for various theatrical and event lighting applications.

2. ආරක්ෂිත උපදෙස්

අවවාදයයි: මෙම ආරක්ෂක උපදෙස් අනුගමනය කිරීමට අපොහොසත් වීමෙන් ගින්නක්, විදුලි කම්පනයක් හෝ වෙනත් තුවාල හෝ හානි සිදුවිය හැකිය.

• මෙම උපාංගය නිර්මාණය කර ඇත ගෘහස්ථ භාවිතය පමණි. Do not expose it to rain or moisture.
• බල සැපයුම් පරිමාව සහතික කරන්නtage matches the rating on the device.
• සෑම විටම උපාංගය භූගත බල සැපයුමකට සම්බන්ධ කරන්න.
• Do not open the housing. There are no user-serviceable parts inside. Refer all servicing to qualified personnel.
• Avoid direct eye exposure to the light source. The LED light is very bright.
• ඒකකය වටා ප්‍රමාණවත් වාතාශ්‍රයක් සහතික කරන්න. වාතාශ්‍රය විවරයන් අවහිර නොකරන්න.
• Mount the device securely using appropriate clamps සහ ආරක්ෂිත කේබල්.
• Disconnect from mains power before cleaning or servicing.
• ගිනිගන්නා ද්‍රව්‍ය උපාංගයෙන් ඈත් කරන්න.

3. නිෂ්පාදන අවසන්view

Familiarize yourself with the components of your Eurolite THA-250F LED Theater Spot.

රූපය 3.1: ඉදිරිපස පැත්ත view of the Eurolite THA-250F LED Theater Spot, showing the lens and mounting bracket.

රූපය 3.2: පැත්ත view of the unit, displaying the 'Eurolite LED THA-250F COB' branding.

Figure 3.3: Rear panel showing DMX IN/OUT, Power IN/OUT, and Fuse connections.

Figure 3.4: The included barndoors accessory, used to shape the light beam.

4. පිහිටුවීම

4.1 සවි කිරීම

The THA-250F is equipped with a robust mounting bracket for secure installation. Ensure the mounting surface or truss system can support the weight of the fixture (approximately 9.35 kg) and any additional accessories. Use appropriate clamps and always attach a safety cable to prevent accidental drops.

4.2 බල සම්බන්ධතාවය

සපයන ලද බල කේබලය වෙත සම්බන්ධ කරන්න බලය socket on the rear panel (refer to Figure 3.3). Plug the other end into a suitable grounded power outlet. The unit supports power linking via the බලය socket for convenience, allowing multiple units to be powered from a single source (ensure total current draw does not exceed circuit limits).

4.3 DMX සම්බන්ධතාවය

For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN socket on the THA-250F (refer to Figure 3.3). To daisy-chain multiple units, connect a DMX cable from the DMX පිටතට socket of the first unit to the DMX IN socket of the next unit. Always terminate the last unit in a DMX chain with a 120 Ohm DMX terminator.

5. මෙහෙයුම් උපදෙස්

5.1 පාලන පැනලය

The control panel, located on the side of the unit, allows for configuration and manual control. It features a display screen, four buttons, and two rotary knobs.

රූපය 5.1: සවිස්තරාත්මක view of the control panel, showing MODE, ENTER, UP, DOWN buttons, and DIMMING, FOCUS knobs.

• උපදෙස්: Cycles through the main menu options.
• ඇතුල් කරන්න: තේරීම් තහවුරු කරයි හෝ උප මෙනු වලට ඇතුළු වේ.
• උඩ යට: Navigates through menu options or adjusts parameter values.
• DIMMING Knob: Manually adjusts the light intensity.
• FOCUS Knob: Manually adjusts the beam focus.

Figure 5.2: The display screen indicating the current DMX address (ADDR:032) and channel mode (CH:03).

5.2 මෙහෙයුම් ආකාර

The THA-250F can operate in several modes:

• DMX මාදිලිය: Allows external control via a DMX controller. Set the DMX address and channel mode using the control panel.
• අත්පොත මාදිලිය: Control dimming and focus directly using the knobs on the control panel.
• Other modes (e.g., Standalone, Master/Slave) may be available. Refer to the on-screen menu for detailed options.

5.3 මූලික මෙහෙයුම

After powering on the unit, the display will show the current operating mode or DMX address. Use the MODE and ENTER buttons to navigate the menu. Use UP/DOWN to change values. The DIMMING and FOCUS knobs provide immediate manual control over light output and beam sharpness.

Figure 5.3: Two Eurolite THA-250F units in an operational setting, demonstrating their light output capabilities.

6. නඩත්තු කිරීම

6.1 පිරිසිදු කිරීම

Regular cleaning helps maintain optimal performance and extends the lifespan of your device. Disconnect the unit from power before cleaning.

• ඒකකයේ බාහිර පෙනුම පිස දැමීමට මෘදු, ලින්ට් රහිත රෙද්දක් භාවිතා කරන්න.
• For the lens, use a specialized lens cleaning solution and a microfiber cloth to avoid scratches.
• Periodically clean the ventilation openings to ensure proper airflow and prevent overheating. Use compressed air to remove dust.

6.2 ගබඩා කිරීම

When not in use, store the device in a dry, dust-free environment, away from extreme temperatures and humidity. If transporting, use appropriate protective cases.

7. දෝශ නිරාකරණය

If you encounter issues with your Eurolite THA-250F, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Eurolite customer support or a qualified technician.

8. පිරිවිතර

9. වගකීම් සහ සහාය

This product is manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support, spare parts, or service inquiries, please contact Eurolite customer service directly or visit their official webඅඩවිය.

නිෂ්පාදකයා: යුරෝලයිට්