සෙවුම් ශ්‍රේණි 27 වර්ගය 270182300000 විද්‍යුත් යාන්ත්‍රික ස්පන්දන රිලේ පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides essential information for the safe and efficient installation, operation, and maintenance of the Finder Series 27 Type 270182300000 Electromechanical Pulse Relay. Please read this manual thoroughly before using the product and retain it for future reference.

The Finder Series 27 pulse relay is a 10 A, unipolar switch with 1 normally open (NO) contact, designed for AC 50/60 Hz systems at 230 V. It features a standard design with socket clamps for connection and is suitable for panel mounting.

2 ආරක්ෂිත තොරතුරු

අවවාදයයි: Electrical shock hazard. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.

• Always disconnect power before installing, servicing, or removing the relay.
• විදුලි කම්පනය වැළැක්වීම සඳහා නිසි බිම් සැකසීම සහතික කරන්න.
• සැපයුම් පරිමාව බව තහවුරු කරන්නtage and current ratings match the relay's specifications.
• Do not operate the relay in environments exceeding its specified temperature or humidity limits.
• Avoid exposing the relay to moisture or corrosive substances.

3. නිෂ්පාදන අවසන්view

The Finder Series 27 Electromechanical Pulse Relay is designed for applications requiring sequential switching, such as lighting control. Key features include:

• පැනල් සවිකිරීම: Designed for secure installation within electrical panels.
• AC Coils: Operates with alternating current.
• 1 NO Contact: Features one normally open contact for switching circuits.
• 3 Sequences Available: Supports various operational sequences.
• අධි බල ධාරිතාව: 10 සඳහා ශ්‍රේණිගත කර ඇත Amps and 2400 Watts at 230 Volts.

රූපය 3.1: ඉදිරිපස view of the Finder Series 27 Electromechanical Pulse Relay, showing its transparent casing and terminal connections.

4. පිහිටුවීම සහ ස්ථාපනය

This pulse relay is designed for panel mounting. Follow these steps for proper installation:

1. විදුලිය විසන්ධි කිරීම: Ensure all power to the installation area is disconnected at the main circuit breaker before beginning any work.
2. සවි කිරීම: Securely mount the relay within an electrical panel using appropriate fasteners. The relay dimensions are approximately 1.26 x 2.17 x 2.76 inches.
3. රැහැන් සම්බන්ධතා:
   • Identify the three terminals on the relay.
   • Connect the control circuit wires to the coil terminals (A1, A2) as indicated on the relay. The coil voltage is 230 Volts AC.
   • Connect the load circuit wires to the contact terminals (1 NO) using the clamp-type connectors. The relay is rated for 10 Amps.
   • ලිහිල් සම්බන්ධතා සහ අධික උනුසුම් වීම වැළැක්වීම සඳහා සියලුම සම්බන්ධතා තදින් සහ ආරක්ෂිතව ඇති බවට වග බලා ගන්න.
4. සත්‍යාපනය: Double-check all wiring against the electrical diagram for your specific application.
5. බල පුනස්ථාපනය: ස්ථාපනය සම්පූර්ණ කර සත්‍යාපනය කළ පසු, පරිපථයට බලය ප්‍රතිස්ථාපනය කරන්න.

රූපය 4.1: සවිස්තරාත්මක view of the Finder Series 27 Relay's screw terminals, illustrating connection points for wiring.

5. මෙහෙයුම් උපදෙස්

The Finder Series 27 pulse relay operates automatically based on the control signals it receives. It is commonly used in applications where a momentary input signal triggers a change in the output state, which then remains until the next momentary input.

• When a pulse is applied to the coil terminals (A1, A2), the internal mechanism latches, changing the state of the 1 NO contact.
• The contact remains in this new state even after the control pulse is removed.
• A subsequent pulse will revert the contact to its original state.
• The relay supports three distinct operational sequences, which are determined by the specific model variant and internal configuration. Refer to your system's wiring diagram for the exact sequence implemented.

රූපය 5.1: Example of the Finder Series 27 Relay integrated into a kitchen lighting system, demonstrating its application in controlling light fixtures.

රූපය 5.2: The Finder Series 27 Relay shown in a living room setting, illustrating its use for managing multiple light sources.

6. නඩත්තු කිරීම

The Finder Series 27 pulse relay is designed for long-term, reliable operation with minimal maintenance. However, periodic inspection is recommended:

• දෘශ්‍ය පරීක්ෂාව: Periodically inspect the relay for any signs of physical damage, discoloration, or loose connections.
• පිරිසිදු කිරීම: අවශ්‍ය නම්, වියළි මෘදු රෙද්දකින් රිලේ පිටත කොටස මෘදු ලෙස පිරිසිදු කරන්න. ද්‍රාවක හෝ උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
• සම්බන්ධතා පරීක්ෂාව: Ensure all wiring connections remain tight and secure.
• පාරිසරික තත්ත්වයන්: මෙහෙයුම් පරිසරය නිශ්චිත උෂ්ණත්ව හා ආර්ද්‍රතා පරාසයන් තුළ පවතින බව තහවුරු කර ගන්න.

සටහන: The relay is a sealed unit and is not user-serviceable internally. Do not attempt to open the casing.

7. දෝශ නිරාකරණය

If the Finder Series 27 pulse relay is not functioning as expected, consider the following troubleshooting steps:

• No Response to Control Signal:
  • Check if power is supplied to the control circuit and the relay coil (A1, A2).
  • Verify that the control signal voltage matches the relay's coil voltage (230V AC).
  • Inspect control circuit wiring for breaks or loose connections.
• පැටවීම මාරු නොවේ:
  • Ensure the relay is receiving control pulses and its internal mechanism is audibly clicking or visibly changing state (if applicable).
  • Check the load circuit wiring for continuity and secure connections.
  • භාර ධාරාව රිලේ 10 ට වඩා වැඩි නොවන බව තහවුරු කරගන්න. Amp ශ්රේණිගත කිරීම.
  • Confirm that the load itself is functional.
• රිලේ අධික උනුසුම් වීම:
  • Ensure the load current does not exceed the relay's maximum rating.
  • Check for proper ventilation around the relay within the panel.
  • පරිසර උෂ්ණත්වය නිශ්චිත මෙහෙයුම් පරාසය තුළ ඇති බව තහවුරු කර ගන්න.

If issues persist after performing these checks, contact a qualified electrician or Finder technical support.

8. පිරිවිතර

9. වගකීම් සහ සහාය

For information regarding warranty coverage, technical support, or service, please contact Finder directly through their official webවෙබ් අඩවිය හෝ බලයලත් බෙදාහරින්නන්. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

නිෂ්පාදකයා: ෆින්ඩර්

කොටස අංකය: 27.01.8.230.0000