1. හැඳින්වීම
The ZIOCOM Ground Loop Noise Isolator is designed to eliminate unwanted buzzing or humming noises caused by ground loops in audio systems. This compact and easy-to-use device ensures clear, uninterrupted sound quality for your car audio system or home stereo setup.
Ground loops occur when audio components are connected to different power sources, creating a difference in ground potential that results in audible noise. This isolator effectively breaks the ground loop, allowing for a clean audio signal.
2. නිෂ්පාදන අවසන්view
The ZIOCOM Ground Loop Noise Isolator is a passive device, meaning it requires no external power. It features 3.5mm audio jacks for simple inline connection.
Figure 2.1: ZIOCOM Ground Loop Noise Isolator with 3.5mm cable.
ප්රධාන ලක්ෂණ:
- Eliminates Buzzing Noise: Specifically designed to remove ground loop induced noise from audio signals.
- Passive Design: No external power supply or battery required.
- ප්ලග් සහ ප්ලේ: Simple to connect with 3.5mm audio cables.
- පුළුල් අනුකූලතාව: Works with any audio device featuring 3.5mm audio jacks, including car audio systems and home stereos.
- සංයුක්ත ප්රමාණය: Small and lightweight for easy portability and discreet installation.
3. පිහිටුවීම සහ ස්ථාපනය
The ZIOCOM Ground Loop Noise Isolator is designed for straightforward installation. Follow these steps to integrate it into your audio system:
- ශබ්ද ප්රභවය හඳුනා ගන්න: Determine which audio connection is causing the ground loop noise. This typically occurs when an audio source (e.g., smartphone, MP3 player) and a speaker system (car stereo, home speakers) share different power grounds.
- Disconnect Audio Cables: Ensure all audio connections between the source and the speaker system are disconnected.
- Connect the Isolator: Insert one end of a 3.5mm audio cable into the audio output of your source device (e.g., phone, tablet). Connect the other end of this cable to the input jack of the ZIOCOM Ground Loop Noise Isolator.
- Connect to Speaker System: Use another 3.5mm audio cable to connect the output jack of the ZIOCOM Ground Loop Noise Isolator to the AUX input of your car stereo or home speaker system.
Figure 3.1: Connection diagram for the Ground Loop Noise Isolator.
Once connected, the isolator will immediately begin filtering out the ground loop noise. No additional configuration or power is needed.
රූපය 3.2: උදාample installation in a car audio system.
රූපය 3.3: උදාample installation with a home stereo system.
4. මෙහෙයුම් උපදෙස්
The ZIOCOM Ground Loop Noise Isolator operates automatically once connected. There are no buttons, switches, or software to control. Simply ensure it is properly connected inline between your audio source and your speaker system.
The device works by isolating the ground paths, preventing electrical interference from traveling through the audio signal. This results in a clean, clear audio output.
Figure 4.1: Noise filtering principle of the isolator.
5. නඩත්තු කිරීම
The ZIOCOM Ground Loop Noise Isolator requires minimal maintenance due to its passive and durable design.
- පිරිසිදු කිරීම: Wipe the device with a soft, dry cloth to remove dust or smudges. Do not use liquid cleaners or abrasive materials.
- ගබඩා: Store the isolator in a cool, dry place when not in use.
- හැසිරවීම: Avoid dropping the device or subjecting it to excessive force, which could damage internal components or connectors.
6. දෝශ නිරාකරණය
If you experience issues with your ZIOCOM Ground Loop Noise Isolator, refer to the following common problems and solutions:
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Buzzing/Humming noise persists. | The noise is not caused by a ground loop, or the ground loop is complex. | Ensure the noise is indeed a ground loop (often a constant hum or buzz that changes with engine RPM in cars). Verify all connections are secure. If the noise persists, the issue may stem from other electrical interference or faulty components not related to ground loops. |
| Audio volume is reduced or sound quality is degraded. | Some passive isolators can slightly attenuate the audio signal. | Increase the volume on your audio source or speaker system. While minimal, some signal loss can occur with passive devices. Ensure the audio cables used are of good quality. |
| ශ්රව්ය ප්රතිදානය නැත. | Incorrect connection or faulty cable. | Check all 3.5mm cable connections to ensure they are fully inserted and connected to the correct input/output jacks. Test with different audio cables to rule out cable issues. |
7. පිරිවිතර
| ගුණාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | G01 |
| අයිතමයේ බර | අවුන්ස 0.635 කි |
| නිෂ්පාදන මානයන් (L x W x H) | අඟල් 4.72 x 2.95 x 0.75 |
| සම්බන්ධක වර්ගය | Auxiliary (3.5mm Jack) |
| වර්ණය | කළු |
| ගැළපෙන උපාංග | MP3 Player, Speaker, Car Audio Systems, Home Stereos |
| නිෂ්පාදකයා | ZIOCOM |
| පළමු ලබා ගත හැකි දිනය | දෙසැම්බර් 16, 2015 |
8. වගකීම් සහ සහාය
The ZIOCOM Ground Loop Noise Isolator (Model G01) comes with a වසර 1ක වගකීමක් මිලදී ගත් දින සිට. මෙම වගකීම් සහතිකය සාමාන්ය භාවිතය යටතේ ද්රව්ය හා වැඩ කිරීමේ දෝෂ ආවරණය කරයි.
For warranty claims, technical support, or any inquiries regarding your ZIOCOM product, please contact ZIOCOM customer service through their official channels. You can find more information and contact details by visiting the ZIOCOM Store on Amazon.
වගකීම් වලංගු කිරීම සඳහා කරුණාකර ඔබගේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.
