1. හැඳින්වීම
The M-Wave M14W is a wired bicycle computer designed to provide essential cycling data. It features 14 functions to help you track your rides effectively. Please read this manual carefully before installation and use to ensure proper function and longevity of your device.
රූපය 1: ඉදිරිපස view of the M-Wave M14W bicycle computer, showing the display with current speed (37.0 KM/hr) and distance (2.625).
2. පැකේජ අන්තර්ගතය
Before proceeding with installation, verify that all components are present in the package:
- M-Wave M14W Bicycle Computer Unit
- Wired Sensor and Cable
- සවිකරන වරහන
- රෝද චුම්බක
- Cable Ties for securing
- CR2 බැටරිය (පෙර ස්ථාපනය කර හෝ වෙන වෙනම ඇතුළත් කර ඇත)
- උපදෙස් අත්පොත (මෙම ලේඛනය)
Figure 2: The M-Wave M14W bicycle computer shown in its retail packaging, indicating wireless functionality and 14 functions.
3. පිහිටුවීම සහ ස්ථාපනය
3.1 බැටරි ස්ථාපනය
The M-Wave M14W uses a CR2 battery. The battery may be pre-installed. If not, or if you need to replace it:
- Locate the battery compartment on the back of the computer unit.
- Use a small coin or screwdriver to open the battery cover by twisting it counter-clockwise.
- ධනාත්මක (+) පැත්ත ඉහළට මුහුණලා CR2 බැටරිය ඇතුළු කරන්න.
- බැටරි කවරය ප්රතිස්ථාපනය කර එය සුරක්ෂිත කිරීමට දක්ෂිණාවර්තව කරකවන්න.
රූපය 3: පසුපස view of the M-Wave M14W unit, showing the battery compartment and reset button.
3.2 Mounting the Computer and Sensor
Follow these steps to securely mount the computer and its wired sensor:
- සවිකරන වරහන: Attach the mounting bracket to your handlebar or stem using the provided straps or cable ties. Ensure it is firmly secured and positioned for easy viewing.
- සංවේදක ස්ථානගත කිරීම: Mount the wired sensor to the front fork of your bicycle, ensuring it is aligned with the wheel magnet. The sensor should be positioned so that the magnet passes within 5mm of the sensor as the wheel rotates.
- චුම්බක ස්ථාපනය: Attach the magnet to a spoke on your front wheel. Adjust its position so it aligns with the sensor.
- කේබල් මාර්ගගත කිරීම: Route the sensor cable along the fork and frame, securing it with cable ties to prevent it from interfering with moving parts or getting snagged. Plug the cable into the computer unit's port.
- Computer Attachment: Slide the M14W computer unit onto the mounting bracket until it clicks into place.
3.3 මූලික සැකසුම්
After installation, you will need to configure the basic settings:
- ඒකක තේරීම: ඔබන්න මාදිලිය button to cycle through settings. When prompted, select your preferred unit of speed (KM/hr or MPH) using the සකසන්න button. Confirm with මාදිලිය.
- රෝද වට ප්රමාණය: This is crucial for accurate speed and distance readings.
- Refer to your bicycle tire's sidewall for its size (e.g., 700x23C, 26x1.95).
- Consult a wheel circumference chart (available online or in bicycle shops) to find the corresponding value in millimeters (mm).
- Enter this value into the computer using the සකසන්න button to adjust digits and මාදිලිය ඊළඟ ඉලක්කමට යාමට.
- Initial Odometer Setting (Optional): Some models allow setting an initial odometer value. Follow on-screen prompts if this option appears.
4. මෙහෙයුම් උපදෙස්
The M14W features two primary buttons: සකසන්න සහ මාදිලිය.
- මාදිලි බොත්තම: Used to cycle through different display functions (e.g., Speed, Distance, Ride Time, Odometer). In setting mode, it confirms selections or moves to the next setting.
- SET බොත්තම: Used to adjust values during setup (e.g., wheel circumference, time). In some modes, it may reset specific trip data.
4.1 Display Functions (14 Functions)
ඔබන්න මාදිලිය බොත්තම view පහත සඳහන් කාර්යයන්:
| කාර්යය | විස්තරය |
|---|---|
| Current Speed (SPD) | Displays your current riding speed. |
| Average Speed (AVS) | Calculates the average speed of your current ride. |
| උපරිම වේගය (MXS) | Shows the highest speed achieved during your current ride. |
| චාරිකා දුර (DST) | Measures the distance covered in your current ride. |
| සම්පූර්ණ දුර (ODO) | Accumulated total distance covered by the bicycle computer. |
| Ride Time (TM) | Duration of your current ride. |
| ඔරලෝසුව (CLK) | Displays the current time (12H/24H format). |
| ස්කෑන් ප්රකාරය | Automatically cycles through various functions. |
| වේග සංසන්දකය | Indicates if your current speed is above or below your average speed. |
| නඩත්තු අනතුරු ඇඟවීම | An icon may appear to remind you of bicycle maintenance. |
| Temperature (TEMP) | පරිසර උෂ්ණත්වය පෙන්වයි. |
| Calories Burned (CAL) | Estimates calories burned based on ride data. |
| Fat Burned (FAT) | Estimates fat burned based on ride data. |
| පසුතල ආලෝකය | අඩු ආලෝක තත්ත්වයන් යටතේ වුවද දෘශ්යතාව සඳහා සංදර්ශකය ආලෝකමත් කරයි. |
4.2 Resetting Trip Data
To reset trip-specific data (Trip Distance, Average Speed, Maximum Speed, Ride Time), typically you will press and hold the සකසන්න button for a few seconds while in the relevant display mode. Refer to the on-screen prompts for confirmation.
5. නඩත්තු කිරීම
5.1 පිරිසිදු කිරීම
Clean the computer unit and sensor regularly with a soft, damp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න, මන්ද මේවා සංදර්ශකයට හෝ සී වලට හානි කළ හැකිය.asing. The unit has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. Avoid submerging the unit in water.
5.2 බැටරි ප්රතිස්ථාපනය
When the display becomes dim or erratic, it's time to replace the CR2 battery. Follow the steps outlined in Section 3.1. Dispose of old batteries responsibly according to local regulations.
5.3 ගබඩා කිරීම
If storing the bicycle computer for an extended period, it is recommended to remove the battery to prevent leakage and potential damage to the unit.
6. දෝශ නිරාකරණය
If you encounter issues with your M-Wave M14W computer, try the following solutions:
| ගැටලුව | විය හැකි හේතුව / විසඳුම |
|---|---|
| සංදර්ශකයක් නැත හෝ අඳුරු සංදර්ශකයක් නැත | Battery is low or dead. Replace the CR2 battery. Ensure battery is inserted correctly. |
| No speed/distance reading |
|
| Incorrect speed/distance | Incorrect wheel circumference setting. Re-enter the correct wheel circumference (see Section 3.3). |
| Unit not responding to buttons | Try a soft reset by removing and reinserting the battery. If issues persist, a full reset (using the reset button on the back, if available) might be necessary, which will clear all data. |
7. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | M-WAVE M14W |
| වර්ණය | කළු |
| ප්රධාන ද්රව්ය | ප්ලාස්ටික් |
| මානයන් (L x W x H) | 15.19 x 10.21 x 2.49 සෙ.මී |
| බර | ග්රෑම් 124 කි |
| බැටරි වර්ගය | 2 CR2 (ඇතුළත්) |
| කාර්යයන් | 14 කාර්යයන් |
| ජල ආරක්ෂණ ශ්රේණිගත කිරීම | IP44 (ජලය ඉසීමෙන් ආරක්ෂා කර ඇත) |
| අතුරු මුහුණත | බොත්තම් |
| UPC | 887539009502 |
8. වගකීම් සහ සහාය
M-Wave products are manufactured to high quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official M-Wave website. In case of technical issues or questions not covered in this manual, please contact M-Wave customer support through their official channels.
Figure 4: M-Wave brand logo, "Your World of Cycling".
For more information and product updates, you may visit the official M-Wave webඅඩවිය: www.m-wave-bike.com
