1. හැඳින්වීම
The Stabila FLS90 Laser Kit is designed to facilitate fast and precise layout work for various flooring applications, including tiles, parquet, laminate, carpeting, and PVC. Utilizing STABILA's floor-line optics, this device projects sharp, visible laser lines directly along the floor surface, providing a perfect 90-degree angle with the press of a button. Its dual-purpose base allows for versatile positioning on flat surfaces or directly in tile corners, enhancing efficiency and accuracy in your projects.
2 ආරක්ෂිත තොරතුරු
අවවාදයයි: ලේසර් විකිරණය
This product is a Class 2 laser product. Avoid direct eye exposure to the laser beam. Do not stare into the beam. Do not intentionally direct the laser beam at people or animals. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
- Always operate the laser in a safe manner, ensuring the beam is not directed towards reflective surfaces that could cause unintended exposure.
- Keep the device dry and clean. Do not immerse in water or expose to excessive moisture.
- උපාංගය දරුවන්ට ළඟාවිය නොහැකි ලෙස ගබඩා කරන්න.
- Do not attempt to disassemble or modify the laser unit. Refer all servicing to qualified personnel.
3. පැකේජ අන්තර්ගතය
කරුණාකර පහත අයිතම සඳහා පැකේජය පරීක්ෂා කරන්න:
- Stabila FLS90 Laser Unit
- Dual-Purpose Base
- 3 x AA ක්ෂාරීය බැටරි
- රැගෙන යන නඩුව
4. පිහිටුවීම
4.1 බැටරි ස්ථාපනය
- Locate the battery compartment on the underside of the Stabila FLS90 laser unit.
- Open the battery compartment cover by sliding or unlatching it according to the markings.
- Insert 3 AA alkaline batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
- බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.
4.2 Attaching the Dual-Purpose Base
The FLS90 comes with a versatile base that allows for stable placement on flat surfaces or precise positioning in corners.
- Align the laser unit with the base, ensuring the connection points match.
- Gently press the laser unit onto the base until it clicks securely into place.
- To detach, press the release tabs (if present) and lift the laser unit from the base.
5. මෙහෙයුම් උපදෙස්
5.1 බලය සක්රිය / අක්රිය
- To turn on the device, press the power button located on the top of the laser unit. The laser lines will immediately project.
- උපාංගය අක්රිය කිරීමට, නැවත බල බොත්තම ඔබන්න.
5.2 Laser Line Projection
Upon activation, the FLS90 projects two sharp, visible laser lines at a perfect 90-degree angle. These lines are optimized by STABILA's floor-line optics to run precisely along the floor surface.
5.3 අයදුම්පත්
- Floor Layout: Place the FLS90 on the floor where you need to establish a precise 90-degree reference. The laser lines will guide your installation of tiles, parquet, laminate, or other flooring materials.
- Corner Alignment: The dual-purpose base allows the unit to be positioned directly into corners, providing accurate square lines for wall and floor transitions or corner tile installations.
- Wall Squareness Check: The unique housing design allows for quick visual checks of wall squareness.
The laser lines are visible up to 50 feet. For extended range applications, the FLS90 can be used with an optional receiver (Stabila #07330) for visibility up to 490 feet.
6. නඩත්තු කිරීම
6.1 පිරිසිදු කිරීම
- උපාංගය මෘදු, ඩී සමඟ පිස දමන්නamp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවණ භාවිතා නොකරන්න.
- Ensure the laser apertures are clean and free of dust or debris to maintain optimal beam clarity.
6.2 ගබඩා කිරීම
- When not in use, store the Stabila FLS90 in its provided carrying case to protect it from dust, dirt, and physical damage.
- උපාංගය සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
- For long-term storage, remove the batteries to prevent leakage and potential damage to the unit.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| No laser lines projected | Batteries are dead or incorrectly inserted. Device is not turned on. | Check battery polarity and replace batteries if necessary. Press the power button to turn on the device. |
| Laser lines are faint or flickering | Low battery power. Bright ambient light. Dirty laser apertures. | Replace batteries. Operate in lower light conditions if possible. Clean laser apertures with a soft cloth. |
| Inaccurate laser lines | Device is not placed on a stable, level surface. Obstructions blocking the beam. | Ensure the device is on a flat, stable surface. Remove any obstructions from the laser path. |
| උපාංගය ක්රියාත්මක නොවේ | Batteries are completely drained or faulty. | Replace with new, fresh alkaline batteries. |
8. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | Stabila - 04490 |
| වෙළඳ නාමය | Stabila |
| ද්රව්ය | ප්ලාස්ටික්, ලෝහ |
| වර්ණය | කළු |
| ශෛලිය | Laser, Square |
| අයිතමයේ බර | රාත්තල් 1 (කිලෝග්රෑම් 0.45) |
| නිෂ්පාදන මානයන් | 7.5 x 7.25 x 5.25 අඟල් (19.05 x 18.42 x 13.34 cm) |
| මෙහෙයුම් ආකාරය | ස්වයංක්රීය |
| ලේසර් දෘශ්යතාව | අඩි 50 (මීටර් 15.24) දක්වා |
| Laser Visibility with Receiver | Up to 490 feet (149.35 m) with optional receiver #07330 |
| අවශ්ය බැටරි | 3 x AA Alkaline batteries (included) |
| සාමාන්ය බැටරි ආයු කාලය | පැය 20 යි |
| UPC | 743153432501 |
9. වගකීම් සහ සහාය
For detailed warranty information, please refer to the warranty card included with your product or visit the official Stabila website. Stabila stands behind the quality of its products and offers support for any manufacturing defects.
If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Stabila customer support through their official webවෙබ් අඩවිය හෝ ඔබේ නිෂ්පාදන ඇසුරුම්වල සපයා ඇති සම්බන්ධතා තොරතුරු.
වැඩි විස්තර සඳහා, පිවිසෙන්න: www.stabila.com
