හැඳින්වීම
This manual provides comprehensive instructions for the installation, operation, and maintenance of the EVOTECH ESTR-1005 License Plate Holder. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.
ආරක්ෂිත තොරතුරු
Always wear appropriate safety gear, including eye protection and gloves, during installation. Ensure the motorcycle is stable and secured before beginning any work. If you are unsure about any step, consult a qualified mechanic.
පැකේජයේ අන්තර්ගතය
ස්ථාපනය ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න.
- EVOTECH ESTR-1005 License Plate Holder Assembly
- සවි කිරීමේ දෘඩාංග (බෝල්ට්, ඇට, රෙදි සෝදන යන්ත්ර)
- ස්ථාපන උපදෙස් (මෙම අත්පොත)
Figure 1: EVOTECH ESTR-1005 License Plate Holder Assembly. This image shows the complete license plate holder unit, detached from a motorcycle, highlighting its black aluminum construction and multi-piece design.
සැකසුම සහ ස්ථාපනය
නිසි ස්ථාපනය සඳහා මෙම පියවර ප්රවේශමෙන් අනුගමනය කරන්න.
- සකස් කිරීම: Ensure the motorcycle is turned off and stable. Disconnect the battery if working near electrical components.
- පවතින සංරචක ඉවත් කරන්න: Carefully remove the original license plate holder and any associated wiring (e.g., for license plate lights, turn signals) from the motorcycle's rear fender or tail section. Document wiring connections if necessary.
- Mount the New Holder: Align the EVOTECH ESTR-1005 holder with the mounting points on your motorcycle. Secure it using the provided hardware. Ensure all bolts are tightened to the manufacturer's recommended torque specifications (if available, otherwise hand-tighten securely).
- Attach License Plate and Lights: Mount your license plate to the holder. Reconnect or install new license plate lights and turn signals as required. Ensure all electrical connections are secure and properly insulated.
- අවසාන පරීක්ෂාව: Verify that the license plate holder is securely fastened and does not interfere with any moving parts of the motorcycle. Test all lights and signals.
Figure 2: EVOTECH ESTR-1005 License Plate Holder installed on a motorcycle. This image illustrates the license plate holder mounted on the rear of a red motorcycle, showing its integration with the vehicle's design.
මෙහෙයුම් උපදෙස්
The EVOTECH ESTR-1005 License Plate Holder is a passive component designed to securely hold your motorcycle's license plate. Once installed, no further operational steps are required beyond ensuring the license plate remains visible and securely attached according to local regulations.
නඩත්තු කිරීම
Regular maintenance ensures the longevity and proper function of your license plate holder.
- පිරිසිදු කිරීම: Clean the holder periodically with a mild soap and water solution. Avoid abrasive cleaners or solvents that could damage the finish.
- පරීක්ෂාව: Regularly inspect all mounting bolts for tightness. Vibrations from riding can loosen fasteners over time.
- හානි පරීක්ෂාව: Check for any signs of damage, cracks, or corrosion, especially after impacts or prolonged exposure to harsh weather conditions. Replace damaged components immediately.
දෝෂගවේෂණය
මෙම කොටසින් ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සාකච්ඡා කෙරේ.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| License plate holder is loose. | සවිකරන බෝල්ට් ප්රමාණවත් ලෙස තද කර නොමැත. | Tighten all mounting bolts securely. Apply thread-locking compound if necessary. |
| License plate lights or turn signals not working. | Improper electrical connection; faulty bulb/LED; wiring damage. | Check all wiring connections for security and proper insulation. Test bulbs/LEDs. Inspect wiring for cuts or pinches. |
| Vibration or rattling noise from the rear. | Loose components; improper installation. | Re-inspect all mounting points and ensure all parts are securely fastened. Add rubber washers if needed to dampen කම්පන. |
පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | EVOTECH |
| ආදර්ශ අංකය | ESTR-1005 |
| නිෂ්පාදක යොමුව | ESTR-1005/270 |
| ද්රව්ය | ඇලුමිනියම් |
| නිෂ්පාදන බර | ග්රෑම් 998 (ආසන්න වශයෙන් රාත්තල් 2.2) |
| පැකේජ මානයන් | 10.01 x 10.01 x 10.01 සෙ.මී |
වගකීම් සහ සහාය
Specific warranty information for the EVOTECH ESTR-1005 License Plate Holder is not provided in this manual. For details regarding warranty coverage, technical support, or replacement parts, please contact EVOTECH customer service directly or refer to the product's original packaging or purchase documentation.
You may also visit the official EVOTECH webවැඩිදුර සහාය සඳහා අඩවිය.
