1. හැඳින්වීම
This manual provides comprehensive instructions for the safe and effective use of your Celly GHOSTPLUS Magnetic Vent Holder. Please read this manual thoroughly before installation and operation to ensure optimal performance and safety. This product is designed to securely hold your smartphone in a vehicle using a magnetic mount attached to an air vent.
2. පැකේජ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයේ ඇති බව තහවුරු කරගන්න:
- Celly Magnetic Holder Ghost Plus Black (Main Unit)
- 2 x Mounting Plates (for smartphone attachment)
Image 1: Contents of the Celly GHOSTPLUS package, showing the magnetic holder and two metal mounting plates.
3 ආරක්ෂිත තොරතුරු
- රිය පැදවීමේ ආරක්ෂාව: Always ensure the holder is securely mounted and your device is stable before driving. Do not adjust the holder or your device while the vehicle is in motion.
- Airbag Clearance: Do not mount the holder in a location that obstructs the deployment of airbags.
- දෘශ්යතාව: Ensure the holder and your device do not obstruct your view මාර්ගයේ හෝ වාහන පාලනයේ.
- චුම්බක ක්ෂේත්ර: Keep the magnetic holder away from sensitive electronic devices, credit cards, pacemakers, or other items that may be affected by strong magnetic fields.
- උෂ්ණත්වය: Avoid prolonged exposure to extreme temperatures, which can affect the adhesive of the mounting plates or the integrity of the holder.
- දරුවන්: දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
4. සැකසුම සහ ස්ථාපනය
4.1 Attaching the Mounting Plate to Your Device
- පිරිසිදු මතුපිට: Ensure the back of your smartphone or phone case is clean and dry.
- ස්ථානගත කිරීම තෝරන්න: Decide on the optimal placement for the metal mounting plate on the back of your device or inside your phone case. For best results, place it centrally.
- Apply Plate: Remove the protective film from the adhesive side of one of the provided mounting plates. Carefully press the plate firmly onto the chosen surface for at least 30 seconds. Allow the adhesive to cure for a few hours before use for maximum strength.
- සටහන: If using a phone case, you can place the metal plate between your phone and the case without using the adhesive. Ensure the case is thin enough for the magnetic connection to be strong.
4.2 Installing the Holder onto the Air Vent
- Select Vent: Choose a suitable air vent in your vehicle that does not obstruct your view නැතහොත් රිය පැදවීමේ පාලනයට බාධා කරයි.
- Cl විවෘත කරන්නamp: Press the push button on the back of the Celly GHOSTPLUS holder to open the vent clamp.
- Insert into Vent: ප්රවේශමෙන් cl ඇතුල් කරන්න.amp onto one of the vent blades.
- ආරක්ෂිත Clamp: Release the push button to allow the clamp to grip the vent blade securely. Gently tug on the holder to ensure it is firmly attached.
- කෝණය සීරුමාරු කරන්න: The holder can be rotated 360 degrees. Adjust the angle for optimal viewing before attaching your device.
5. මෙහෙයුම් උපදෙස්
5.1 ඔබගේ ස්මාර්ට් ජංගම දුරකථනය සවි කිරීම
Once the metal mounting plate is attached to your smartphone (or case) and the holder is installed on the vent:
- Bring your smartphone close to the magnetic surface of the holder.
- The strong magnets will automatically attract and secure your device in place.
- Adjust the angle of your phone as needed by rotating the holder.
5.2 Removing Your Smartphone
ඔබගේ ස්මාර්ට් ජංගම දුරකථනය රඳවනයෙන් ඉවත් කිරීමට:
- Grasp your smartphone firmly.
- Gently pull your smartphone away from the magnetic surface of the holder. Avoid excessive force to prevent dislodging the holder from the vent.
6. නඩත්තු කිරීම
- පිරිසිදු කිරීම: Wipe the holder with a soft, damp රෙදි. දරුණු රසායනික ද්රව්ය හෝ උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න.
- පරීක්ෂාව: Periodically check the vent clamp for secure attachment and ensure the magnetic surface is free from debris.
- මැලියම්: If the adhesive on the metal plate weakens over time, replace the plate with a new one or use a stronger adhesive.
7. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Phone does not hold securely. | Metal plate not properly attached or too far from the magnet (e.g., thick phone case). | Ensure the metal plate is firmly attached to your phone or case. If using a thick case, try placing the plate on the outside of the case or using a thinner case. |
| Holder is loose on the vent. | වෙන්ට් clamp not fully engaged or vent blade is too thin/thick. | Re-engage the vent clamp එබීමෙන් සහ මුදා හැරීමෙන්asing the button. Try a different vent blade if the current one is not providing a secure grip. |
| Holder rotates too easily. | The rotating mechanism may be loose. | Ensure the ball joint is tightened if applicable (some models have a tightening ring). If not, ensure the vent clamp is very secure. |
8. පිරිවිතර
- නිෂ්පාදන නම: Celly Magnetic Holder Ghost Plus Black
- ආදර්ශ අංකය: GHOSTPLUS
- වෙළඳ නාමය: Celly
- සවිකිරීමේ වර්ගය: වාතාශ්රය
- ගැළපෙන උපාංග: Smartphones (Universal)
- විශේෂ ලක්ෂණ: Magnetic, 360-degree rotation
- නිෂ්පාදන මානයන්: අඟල් 6.69 x 3.94 x 1.77
- අයිතමයේ බර: අවුන්ස 0.002 කි
- වර්ණය: කළු
- නිෂ්පාදකයා: Celly
- පළමු ලබා ගත හැකි දිනය: 28 මාර්තු 2016
9. වගකීම් සහ සහාය
For warranty information, technical support, or customer service inquiries regarding your Celly GHOSTPLUS Magnetic Vent Holder, please contact Celly customer support directly. Refer to the product packaging or the official Celly webඔබගේ කලාපයට අදාළ වන සම්බන්ධතා විස්තර සහ නිශ්චිත වගකීම් කොන්දේසි සඳහා අඩවිය.
