CISA DGT විෂන් ඉලෙක්ට්‍රොනික සේෆ් 82750 උපදෙස් අත්පොත

හැඳින්වීම

This manual provides essential instructions for the installation, operation, and maintenance of your CISA DGT Vision Electronic Safe, model 82750. Please read this manual thoroughly before using the safe to ensure proper function and security.

ආරක්ෂිත තොරතුරු

• Install the safe in a location that is difficult to access with burglary tools.
• Do not store the emergency power cable or any backup keys (if applicable) inside the safe.
• Regularly check battery status and replace batteries when indicated.
• Change the opening code periodically for enhanced security.
• Ensure the safe is securely anchored to a wall or floor as per installation instructions.

පැකේජයේ අන්තර්ගතය

• CISA DGT Vision Electronic Safe (Model 82750)
• Emergency Power Cable (for external power)
• Mounting Hardware (screws, anchors - may vary by region/package)
• උපදෙස් අත්පොත (මෙම ලේඛනය)

Image: The CISA DGT Vision Electronic Safe as it appears in its packaging box, secured with white straps.

සැකසුම සහ ස්ථාපනය

The CISA DGT Vision safe is designed for secure installation within furniture or anchored to a wall/floor. Proper installation is crucial for security.

ස්ථාපන ස්ථානයක් තෝරාගැනීම

• Select a discreet and secure location, preferably out of plain sight.
• Ensure the mounting surface (wall or floor) is structurally sound and can support the weight of the safe and its contents.
• Avoid locations with excessive humidity or extreme temperatures.

Anchoring the Safe

The safe features pre-drilled holes for anchoring.

1. ආරක්ෂිත ස්ථානය අපේක්ෂිත ස්ථානයේ තබන්න.
2. Mark the drilling points through the pre-drilled holes on the back or bottom of the safe onto the mounting surface.
3. Move the safe and drill appropriate holes in the marked positions.
4. Insert suitable anchors (not always included, check package contents) into the drilled holes.
5. Reposition the safe and secure it using the provided or appropriate screws. Tighten all screws firmly.

රූපය: අභ්‍යන්තරය view of the CISA DGT Vision Electronic Safe, showing the pre-drilled holes on the back and bottom for secure mounting.

Image: Technical diagram illustrating the external dimensions of the CISA DGT Vision Electronic Safe: 420mm (width) x 300mm (height) x 350mm (depth).

මෙහෙයුම් උපදෙස්

Initial Battery Installation

The electronic keypad requires 1.5V alkaline button cell batteries.

1. සාමාන්‍යයෙන් ආරක්ෂිත දොරේ ඇතුළත බැටරි මැදිරිය සොයා ගන්න.
2. නිවැරදි ධ්රැවීයතාව සහතික කරමින් බැටරි ඇතුල් කරන්න.
3. බැටරි මැදිරි කවරය වසා දමන්න.

රූපය: සවිස්තරාත්මක view of the CISA DGT Vision electronic keypad, featuring numerical buttons and function keys.

පළමු වරට සේෆ් එක විවෘත කිරීම

Upon initial setup, the safe typically has a factory-set default code (e.g., "1234" or "0000"). Refer to the specific instructions provided with your safe for the exact default code.

1. Enter the default code on the keypad.
2. Press the confirmation button (often marked with a key or checkmark symbol).
3. The lock will disengage, and you can open the door.

Image: A hand pressing buttons on the CISA DGT Vision electronic keypad, demonstrating user interaction.

Setting/Changing Your Personal Code

It is highly recommended to change the default code immediately after the first opening.

1. With the safe door open, locate the internal reset button (often a small button on the inside of the door or near the battery compartment).
2. Press the reset button. The keypad will usually emit a beep or light up to indicate it's ready for a new code.
3. Enter your new personal code (typically 4-8 digits).
4. තහවුරු කිරීමේ බොත්තම ඔබන්න.
5. Re-enter your new personal code and press the confirmation button again to confirm.
6. නව කේතය දොර වැසීමට පෙර විවෘතව තිබියදී පරීක්ෂා කරන්න.

සේප්පුව වසා දැමීම සහ අගුළු දැමීම

To lock the safe, simply close the door. The locking bolts will automatically engage.

රූපය: සමීප ඡායාරූපයක් view of the robust nickel-plated steel locking bolts of the CISA DGT Vision safe, extended from the door edge.

නඩත්තු කිරීම

බැටරි ප්රතිස්ථාපනය

The keypad features indicator lights to warn of low battery power. Replace batteries promptly when this warning appears to avoid being locked out.

1. Open the safe using your code.
2. දොරේ ඇතුළත බැටරි මැදිරිය සොයා ගන්න.
3. පැරණි බැටරි ඉවත් කර වගකීමෙන් යුතුව ඒවා ඉවත් කරන්න.
4. Insert new 1.5V alkaline button cell batteries, observing correct polarity.
5. බැටරි මැදිරිය වසා දමන්න.

External Emergency Power

If batteries completely drain and you cannot open the safe, use the external emergency power cable.

1. Locate the external power input port on the keypad (often a small socket).
2. Connect the emergency power cable to this port and to a fresh 9V battery (not included).
3. While holding the emergency power, enter your code to open the safe.
4. විවෘත කළ වහාම අභ්‍යන්තර බැටරි ප්‍රතිස්ථාපනය කරන්න.

සාමාන්ය සත්කාර

• සේප්පුවේ බාහිර පෙනුම මෘදු, d තුණ්ඩයකින් පිරිසිදු කරන්න.amp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන්ගෙන් වළකින්න.
• Do not lubricate the electronic components or keypad.
• Periodically check the anchoring bolts for tightness.

දෝෂගවේෂණය

Safe Does Not Open with Code

• වැරදි කේතය: Ensure you are entering the correct code. Try again carefully.
• අඩු බැටරි: Check the battery indicator. If low, replace batteries or use the external emergency power cable.
• යතුරු පුවරුවේ අක්‍රියතාව: If the keypad does not respond at all, ensure batteries are correctly installed and charged. If issues persist, contact customer support.

යතුරුපුවරුව ප්‍රතිචාර නොදක්වයි

• Dead Batteries: බැටරි ප්රතිස්ථාපනය කරන්න.
• Incorrect Battery Installation: Verify polarity.

Safe Door Does Not Close Properly

• බාධාව: Check for any items blocking the door or locking bolts.
• නොගැලපීම: Ensure the safe is installed on a level surface and the door hinges are not damaged.

පිරිවිතර

වගකීම් සහ සහාය

For warranty information and technical support, please refer to the documentation provided at the time of purchase or contact CISA customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official CISA webඅඩවියට හෝ ඔවුන්ගේ බලයලත් සේවා මධ්‍යස්ථාන අමතන්න.