Apera Instruments Value Series Salt20 Salinity Tester Kit User Manual

හැඳින්වීම

This manual provides detailed instructions for the proper use and maintenance of your Apera Instruments Salt20 Salinity Tester Kit. The Salt20 is designed for professional salinity measurement in various water solutions, including pools, spas, agriculture, and environmental monitoring.

For optimal performance and longevity of your device, please read this manual thoroughly before operation.

The Apera Instruments Salt20 Salinity Tester is suitable for a wide range of applications including hydroponics, pools, and drinking water analysis.

ආරක්ෂිත පූර්වාරක්ෂාවන්

වැදගත් ආරක්ෂක තොරතුරු

• Always handle the device with care to prevent damage to the sensor.
• Do not immerse the entire meter in water beyond the specified IP67 waterproof rating.
• Keep calibration solutions and the device out of reach of children.
• උපාංගය භාවිතා නොකරන විට සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.
• Ensure the battery compartment is sealed properly to maintain water resistance.

නිෂ්පාදනය අවසන්view

කට්ටල සංරචක

The Salt20 Salinity Tester Kit includes the meter, calibration solution, AAA batteries, and a lanyard, all housed in a portable carrying case.

The Apera Instruments Salt20 Salinity Tester Kit includes:

• Salt20 Salinity Tester
• 1 bottle of calibration solution (12.88 mS/cm, equivalent to 6.44 ppt)
• AAA batteries (pre-installed or included)
• Lanyard
• අතේ ගෙන යා හැකි රැගෙන යා හැකි නඩුව

ප්රධාන ලක්ෂණ

• ඉහළ නිරවද්යතාව: Apera's unique platinum black sensor (BPB) ensures high accuracy in a wide-range salinity measurement (0 to 10.0 ppt).
• Easy Auto Calibration: 1-point auto calibration with auto buffer recognition.
• ස්වයංක්‍රීය උෂ්ණත්ව වන්දි (ATC): 0-50°C ATC for precise readings.
• පැහැදිලි LCD සංදර්ශකය: Large LCD with dual display of salinity (ppt) and temperature (°C/°F), including reminders for stable readings and completed calibrations.
• ජල ආරක්ෂිත නිර්මාණය: IP67 water-resistant and floatable for durability.
• දිගු බැටරි ආයු කාලය: Up to 1000 hours of operation powered by AAA batteries.
• ස්වයං-රෝග විනිශ්චය: With out-of-range and low battery warnings.

සංවේදක තාක්ෂණය

The Salt20 features Apera's unique Brush-Resistant Platinum Black (BPB) sensor, designed for high accuracy and consistency in wide-range salinity testing.

LCD සංදර්ශක විස්තර

The clear LCD display provides simultaneous readings for salinity (ppt) and temperature, along with indicators for stable readings and successful calibration.

උපාංග

A lanyard is included for convenient and secure use of the Salt20 Salinity Tester.

The complete test kit comes in a rugged carrying case for protection and portability.

සැලසුම

බැටරි ස්ථාපනය

The Salt20 Salinity Tester is powered by 4 AAA batteries.

1. Unscrew the battery cap at the top of the meter.
2. Insert the AAA batteries according to the polarity indicators (+/-).
3. Securely screw the battery cap back on to ensure the waterproof seal.

මූලික සූදානම

1. සංවේදකයෙන් ආරක්ෂිත තොප්පිය ඉවත් කරන්න.
2. Rinse the sensor with distilled water and gently shake off excess water.
3. The meter is now ready for calibration or measurement.

මෙහෙයුම් උපදෙස්

මූලික මිනුම්

1. ක්රියාත්මක කරන්න: Short press the MEAS button to turn on the meter.
2. Immerse Sensor: Dip the sensor into the sample solution, ensuring the solution covers the sensor completely. Stir gently to remove air bubbles.
3. මිනුම කියවන්න: Wait for the smiley face icon to appear and remain stable on the LCD, indicating a stable reading. Record the salinity (ppt) and temperature (°C/°F) values.
4. නිවා දමන්න: Long press the MEAS button to turn off the meter.

ස්විචින් ඒකක

To switch between °C and °F, with the meter turned off, long press the CAL button until the unit changes.

නිල නිෂ්පාදන වීඩියෝව

ක්රමාංකනය

1-Point Auto Calibration

The Salt20 Salinity Tester uses a 1-point auto calibration process with auto buffer recognition. It is recommended to calibrate the meter regularly for accurate results, especially before critical measurements or if the meter has not been used for a long time.

The Salt20 Salinity Tester features effortless single-button auto calibration with auto buffer recognition, simplifying the calibration process.

1. විසඳුම සකස් කරන්න: Pour a small amount of the 12.88 mS/cm (6.44 ppt) calibration solution into a clean beaker.
2. ක්‍රමාංකන මාදිලිය ඇතුළු කරන්න: With the meter turned on, short press the CAL button. The display will show "CAL" and the calibration value.
3. Immerse Sensor: Dip the sensor into the calibration solution. Stir gently.
4. Wait for Stability: The meter will automatically recognize the calibration solution. Wait for the smiley face icon to appear and remain stable. The calibration success symbol (M) will also appear.
5. Exit Calibration: Short press the MEAS button to exit calibration mode and return to measurement mode.

සටහන: Always use fresh calibration solution for each calibration. Do not pour used solution back into the bottle.

නඩත්තු කිරීම

සංවේදක පිරිසිදු කිරීම

The BPB (Brush-Resistant Platinum Black) sensor is robust but requires proper cleaning to maintain accuracy.

1. After each use, rinse the sensor thoroughly with distilled or deionized water.
2. If there is visible contamination, gently brush the sensor with a soft brush (like a soft toothbrush) while rinsing.
3. For stubborn deposits, soak the sensor in a mild detergent solution for 10-15 minutes, then rinse thoroughly.
4. කවදාවත් නැහැ wipe the sensor with abrasive materials or apply excessive force, as this can damage the platinum black coating.

ගබඩා කිරීම

For long-term storage, ensure the sensor is clean and dry. Replace the protective cap. Store the meter in its carrying case in a cool, dry place.

දෝෂගවේෂණය

පොදු ගැටළු සහ විසඳුම්

පිරිවිතර

තාක්ෂණික පිරිවිතර

වගකීම් සහ සහාය

වගකීම් තොරතුරු

Apera Instruments provides a limited warranty for its products. Please refer to the official Apera Instruments webනිශ්චිත වගකීම් නියමයන් සහ කොන්දේසි සඳහා ඔබේ නිෂ්පාදනය සමඟ ඇතුළත් කර ඇති වෙබ් අඩවිය හෝ වගකීම් කාඩ්පත.

පාරිභෝගික සහාය

For technical assistance, troubleshooting, or inquiries about replacement parts and accessories, please contact Apera Instruments customer support.

Webඅඩවිය: www.aperainst.com

විද්‍යුත් තැපෑල: නිශ්චිත සම්බන්ධතා විද්‍යුත් තැපෑල සඳහා ඔබේ නිෂ්පාදන ලියකියවිලි බලන්න.

දුරකථනය: Refer to your product documentation for specific contact phone number.