හැඳින්වීම
The Neoteck DTI Digital Indicator is designed for precise measurement of small linear distances in mechanical and industrial processes. This tool helps to verify tolerance levels during machine part inspection, making it an ideal instrument for mechanical, industrial, and laboratory applications. It features a large LCD screen for clear readings and offers high resolution for accurate measurements.
Figure 1: Neoteck DTI Digital Indicator
නිෂ්පාදන විශේෂාංග
- විශාල LCD සංදර්ශකය: Equipped with a 4-digit LCD screen for clear and easy-to-read measurements.
- පුළුල් මිනුම් පරාසය: Capable of measuring from 0 to 25.4 mm (0 to 1 inch).
- අධි විභේදනය: Provides high precision measurements up to 0.01 mm (0.0005 inch).
- ඒකක පරිවර්තනය: Easily switch between millimeters (mm) and inches (in) for versatile use.
- Zero Setting Function: Allows for convenient zero calibration at any point.
- ඉවත් කළ හැකි පිටුපස කවරය: Features a 6.5 mm hole diameter, allowing attachment to various magnetic base holder stands.
- Data Output Interface: Includes an RS232 data output interface for connectivity.
- පහසු බැටරි ප්රතිස්ථාපනය: Designed with an accessible SR44 battery compartment.
Figure 2: Digital Indicator Features
සැලසුම
- බැටරි ස්ථාපනය: Locate the battery compartment on the back of the indicator. Insert one 1.5V SR44 button cell battery, ensuring correct polarity. Close the compartment securely.
- Attaching Back Cover: The indicator comes with a back cover. This cover can be attached to the rear of the unit. If using with a magnetic base, ensure the back cover is compatible or removed as needed. The 6.5mm hole allows for mounting on various stands.
- සවි කිරීම (විකල්ප): For stable measurements, it is recommended to mount the digital indicator onto a suitable stand, such as a magnetic base, using the provided back cover or directly if the stand supports it.
Figure 3: Storage Case and Batteries Included
මෙහෙයුම් උපදෙස්
- බලය සක්රිය / අක්රිය: Press the 'ON/OFF' button to turn the indicator on or off.
- ශුන්ය සැකසුම: Position the measurement probe at the desired reference point. Press the 'ZERO' button to set the display to zero. This allows for comparative measurements.
- ඒකක පරිවර්තනය: Press the 'inch/mm' button to switch between millimeter and inch units. The selected unit will be displayed on the LCD screen.
- මිනුම් ගැනීම: Gently lower the measurement probe onto the surface or into the feature to be measured. Read the value displayed on the LCD screen. Ensure the probe moves smoothly without excessive force.
- දත්ත ප්රතිදානය: If connecting to a computer or data logger, use the RS232 data output interface. Refer to the specific software or device manual for connection and data transfer procedures.
Figure 4: Unit Conversion and Multiple Usages
Figure 5: Applications of the Digital Indicator
නඩත්තු කිරීම
- පිරිසිදු කිරීම: Wipe the indicator with a soft, dry cloth. Avoid using solvents or abrasive cleaners, as they may damage the display or housing.
- ගබඩා: Store the indicator in its protective case when not in use to prevent dust accumulation and physical damage. Keep it in a dry environment, away from direct sunlight and extreme temperatures.
- බැටරි ආදේශනය: When the display becomes dim or unresponsive, replace the SR44 button cell battery. Follow the battery installation steps outlined in the Setup section.
- පරීක්ෂණ පරීක්ෂාව: Periodically check the measurement probe for any signs of wear or damage. A damaged probe can affect measurement accuracy.
දෝෂගවේෂණය
- සංදර්ශකය ක්රියා නොකරයි:
- බැටරිය නිවැරදිව ස්ථාපනය කර ඇති අතර ප්රමාණවත් ආරෝපණයක් තිබේදැයි පරීක්ෂා කරන්න. අවශ්ය නම් බැටරිය ප්රතිස්ථාපනය කරන්න.
- Ensure the 'ON/OFF' button has been pressed.
- වැරදි කියවීම්:
- Ensure the 'ZERO' function has been properly used at the reference point.
- Check for any debris or obstruction on the measurement probe or the surface being measured.
- Verify that the indicator is securely mounted and stable during measurement.
- Ensure the probe is not bent or damaged.
- Unit Conversion Not Working:
- Press the 'inch/mm' button firmly. If the issue persists, try replacing the battery.
පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| මිනුම් පරාසය | 0 - 25.4 mm (0 - 1 inch) |
| විභේදනය | 0.01 mm (අඟල් 0.0005) |
| ප්රතිචාර වේගය | ≤ 0.5 m/s |
| මෙහෙයුම් උෂ්ණත්වය | 0 ~ 40 ° C (32 ~ 104 ° F) |
| ගබඩා උෂ්ණත්වය | -20 ~ 70 ° C (-4 ~ 158 ° F) |
| සාපේක්ෂ ආර්ද්රතාවය | ≤ 80 % R.H |
| ද්රව්ය | ඇලුමිනියම් මිශ්ර ලෝහය |
| බලශක්ති ප්රභවය | 1 x 1.5V SR44 බොත්තම් සෛල බැටරිය (ඇතුළත්) |
| අයිතමයේ ප්රමාණය | Approx. 122 (L) x 55 (W) x 26 (D) mm (4.8 x 2.94 x 1.04 inches) |
| අයිතමයේ බර | Approx. 129 g (4.55 oz) (battery included) |
| ආදර්ශ අංකය | NTK021 |
Figure 6: Product Dimensions and Components
පැකේජයේ අන්තර්ගතය
ඔබේ පැකේජයට පහත අයිතම ඇතුළත් වේ:
- 1 x Neoteck DTI Digital Indicator
- 1 x පසුපස කවරය
- 1 x 1.5V SR44 Battery
- 1 x පරිශීලක අත්පොත
රූපය 7: පැකේජයේ අන්තර්ගතය
වගකීම් සහ සහාය
All Neoteck products come with an 18-month UK-based warranty. For technical support, troubleshooting assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official Neoteck webඅඩවිය.
