හැඳින්වීම
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your BeA 14/32-613 Pneumatic Stapler, Model 12000215. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.
Image: The BeA 14/32-613 Pneumatic Stapler, a compact and lightweight tool, shown in its typical blue and black finish. It features a comfortable grip and a durable magazine for staples.
ආරක්ෂිත උපදෙස්
Always follow basic safety precautions when using pneumatic tools to reduce the risk of injury. Keep this manual for future reference.
- Wear appropriate personal protective equipment (PPE), including safety glasses and hearing protection.
- වැඩ කරන ප්රදේශය පිරිසිදු, හොඳින් ආලෝකමත් සහ බාධාවන්ගෙන් තොර බවට වග බලා ගන්න.
- Disconnect the air supply before making adjustments, clearing jams, or performing maintenance.
- කිසිම අවස්ථාවක මෙවලම ඔබ වෙත හෝ අන් අය වෙත යොමු නොකරන්න.
- Use only fasteners specified for this tool.
- මෙවලම හානි වී ඇත්නම් හෝ අක්රිය නම් එය ක්රියාත්මක නොකරන්න.
- Keep hands and body parts away from the discharge area.
නිෂ්පාදන පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | 12000215 |
| ප්රධාන වර්ගය | 14 type staples |
| Staple Length Range | 5/8" to 1 1/4" |
| Crown Size | 7/16" |
| මාපකය | 16/17 මාපකය |
| වැඩ පීඩනය | 75-120 පීඑස්අයි |
| වායු පරිභෝජනය | 0.031 cu. Ft./Cycle @ 90PSI |
| අයිතමයේ බර | රාත්තල් 3.3 කි |
| නිෂ්පාදන මානයන් | අඟල් 7.8 x 2.2 x 10 |
| මෙහෙයුම් ආකාරය | ස්වයංක්රීය |
| ධාරිතාව විස්තරය | සම්පූර්ණ තීරුව |
අනුකූල ගාංචු: 14/15 NK HZ, 14/18 NK HZ, 14/21 NK HZ, 14/25 NK HZ, 14/30 NK HZ, 14/32 NK HZ, 14/32 NRHZ DP.
සැකසීම සහ පූරණය කිරීම
1. Connecting to Air Supply
- Ensure the air compressor is off and the air hose is depressurized.
- Connect a suitable air hose (minimum 3/8" I.D.) to the tool's air inlet fitting.
- Set the air compressor pressure regulator to the recommended working pressure of 75-120 PSI. Do not exceed 120 PSI.
- මෙහෙයුමට පෙර කාන්දුවීම් සඳහා සියලු සම්බන්ධතා පරීක්ෂා කරන්න.
2. ස්ටේප්ල්ස් පැටවීම
- Disconnect the tool from the air supply for safety.
- Locate the magazine latch or release mechanism.
- Open the magazine and insert a strip of compatible 14 type staples, ensuring the staple legs face downwards.
- සඟරාව අගුල් වැටෙන තුරු ආරක්ෂිතව වසා දමන්න.
- Reconnect the air supply.
මෙහෙයුම් උපදෙස්
The BeA 14/32-613 Pneumatic Stapler is designed for applications such as furniture industry, caravans, general carpentry, pallets and boxes, and paneling.
- Ensure the tool is properly loaded with staples and connected to the air supply.
- Position the nose of the stapler firmly against the workpiece where the staple is to be driven.
- Depress the safety mechanism (if applicable) and then pull the trigger to drive a staple.
- For continuous operation, maintain pressure on the nose and trigger, moving the tool along the workpiece.
- ක්රියාත්මක වන විට සෑම විටම මෙවලම මත දැඩි ග්රහණයක් පවත්වා ගන්න.
ධාවකයේ ගැඹුර සකස් කිරීම
This model may feature an adjustable depth of drive. Refer to the tool's specific design for the adjustment mechanism, typically a knob or lever near the nosepiece. Test on scrap material to achieve the desired staple depth.
නඩත්තු කිරීම සහ රැකවරණය
Regular maintenance ensures the longevity and optimal performance of your stapler. The tool is designed to be easy to service.
- දිනපතා: Add a few drops of pneumatic tool oil into the air inlet before each use. This lubricates internal components.
- සතිපතා/මාසික:
- Clean the tool exterior with a damp රෙදි. දැඩි ද්රාවණ භාවිතා නොකරන්න.
- Inspect the nosepiece and magazine for debris or staple residue and clean as necessary.
- Check all screws and fasteners for tightness and tighten if loose.
- Inspect the air hose and fittings for wear or damage. Replace if necessary.
- ගබඩා: Store the tool in a clean, dry place when not in use. Disconnect from air supply.
Service Instructions and Spare Parts
For detailed service instructions and a complete list of spare parts, please refer to the documentation included with your purchase or contact BeA customer support. Regular servicing by qualified personnel is recommended for complex repairs.
දෝෂගවේෂණය
This section addresses common issues you might encounter with your pneumatic stapler.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Staples not driving fully | Low air pressure; incorrect staple length; worn driver blade. | Increase air pressure (within limits); use correct staple length; contact service for blade replacement. |
| Tool misfires or skips staples | Magazine empty; incorrect staples; debris in magazine; worn feeder. | Reload staples; ensure correct staple type; clean magazine; contact service. |
| මෙවලමෙන් වාතය කාන්දු වීම | ලිහිල් සවි කිරීම්; හානි වූ O-මුදු හෝ මුද්රා. | Tighten fittings; contact service for seal replacement. |
| ස්ටේපල්ස් නිතරම හිර වෙනවා | Bent staples; debris in nosepiece/magazine; worn driver. | Use unbent staples; clear debris (disconnect air first); contact service. |
If you encounter issues not listed here or if solutions do not resolve the problem, please contact BeA customer support.
වගකීම් සහ සහාය
BeA products are manufactured to high standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official BeA webඅඩවිය.
For technical support, spare parts, or service inquiries, please contact BeA customer service through their official channels. When contacting support, please have your model number (12000215) and serial number (if applicable) ready.
BeA Official Webඅඩවිය: www.bea-group.com
