PlayStation VR උපදෙස් අත්පොත සඳහා PowerA ආරෝපණ සහ සංදර්ශක ස්ථානය

හැඳින්වීම

The PowerA Charge & Display Station is designed to provide a secure and organized solution for your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers. This station allows for simultaneous charging of one DUALSHOCK 4 controller and two PlayStation Move controllers, while also serving as a dedicated display stand for your PlayStation VR headset. This manual provides essential information for proper setup, operation, and maintenance of your device.

පැකේජයේ අන්තර්ගතය

• PowerA Charge & Display Station
• AC බල ඇඩැප්ටරය

ආරක්ෂිත තොරතුරු

• උපාංගය ක්රියාත්මක කිරීමට පෙර සියලු උපදෙස් කියවන්න.
• උපාංගය ජලයෙන් හෝ අධික තෙතමනයෙන් ඈත් කර තබන්න.
• උපාංගය විසුරුවා හැරීමට හෝ වෙනස් කිරීමට උත්සාහ නොකරන්න.
• Use only the provided AC power adapter.
• ක්‍රියාත්මක වන අතරතුර උපාංගය වටා නිසි වාතාශ්‍රය සහතික කරන්න.
• Place the station on a stable, flat surface to prevent tipping.

සැලසුම

1. Unpack the Station: ඇසුරුම්කරණයෙන් සියලුම සංරචක ප්රවේශමෙන් ඉවත් කරන්න.
2. Assemble the Station: Connect the vertical stand to the base unit. Ensure it clicks securely into place.
3. සම්බන්ධක බලය: Insert the small end of the AC power adapter into the power input port located at the rear of the station's base.
4. මාර්ග බල කේබලය: Utilize the cable management grooves on the underside of the base to route the power cable neatly. There are grooves for rear, left, and right exits.
5. අලෙවිසැලට සම්බන්ධ කරන්න: AC බල ඇඩැප්ටරය සම්මත බිත්ති අලෙවිසැලකට සම්බන්ධ කරන්න.

The back of the station, featuring the power input and integrated cable management channels to keep your setup tidy.

පැති ගැතිfile of the Charge & Display Station, illustrating the support structure for the PSVR headset and the charging docks for controllers.

මෙහෙයුම් උපදෙස්

1. Displaying the PSVR Headset:
   • Gently place your PlayStation VR headset onto the designated cradle at the top of the station.
   • Adjust the headset's band to ensure a secure and stable fit on the stand. This helps prevent accidental slipping.
   • Route the headset's cable around the stand for organized storage.
2. Charging DUALSHOCK 4 Controller:
   • Align the DUALSHOCK 4 controller with the charging port on the front-left dock of the station.
   • Press the controller down firmly onto the spring-loaded connector until it seats properly.
   • A light indicator on the controller will illuminate, confirming that charging has begun.
3. Charging PlayStation Move Controllers:
   • Insert each PlayStation Move controller into its respective charging slot on the front-right of the station.
   • Ensure the controllers are fully seated in the docks for a proper connection.
   • The indicator lights on the Move controllers will show their charging status.

The PowerA Charge & Display Station, fully assembled and ready to hold and charge your PlayStation VR headset, DUALSHOCK 4 controller, and PlayStation Move controllers.

The PlayStation VR headset positioned on its dedicated stand. Adjust the headset band for a secure fit on the display cradle.

Detail of the DUALSHOCK 4 controller charging dock. Ensure the controller is firmly seated for proper connection and charging.

Detail of the PlayStation Move controller charging docks. Place controllers securely into the slots for charging.

නඩත්තු කිරීම

• පිරිසිදු කිරීම: Disconnect the power adapter before cleaning. Use a soft, dry cloth to wipe the surface of the station. Do not use abrasive cleaners or solvents.
• ගබඩා: When not in use for extended periods, store the station in a cool, dry place.

දෝෂගවේෂණය

• Controllers Not Charging:
  • Ensure the power adapter is securely connected to both the station and the wall outlet.
  • Verify that controllers are properly seated in their respective charging docks. For DUALSHOCK 4, ensure it is pressed down firmly onto the spring-loaded connector.
  • Check for any obstructions or debris in the charging ports.
• PSVR Headset Slips Off Stand:
  • Ensure the PSVR headset's adjustable band is tightened to its default or a smaller size when placed on the stand. A loose band may cause the headset to slip.
  • Confirm the station is on a stable, level surface.

පිරිවිතර

• ආදර්ශ අංකය: 1426810-01
• නිෂ්පාදන මානයන්: අඟල් 13.4 x 9.5 x 5.6
• අයිතමයේ බර: රාත්තල් 1.88 කි
• නිෂ්පාදකයා: පවර්ඒ
• ගැළපුම: PlayStation VR Headset, DUALSHOCK 4 Controller, PlayStation Move Controllers

වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official PowerA webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවයට සෘජුවම සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.