Mopar 56038978AL Genuine Rear View Back Up Camera Instruction Manual

1. නිෂ්පාදන අවසන්view

This document provides comprehensive instructions for the installation, operation, and maintenance of the Mopar 56038978AL Genuine Rear View Back Up Camera. This camera is an Original Equipment Manufacturer (OEM) part designed to provide clear rearward visibility for safe vehicle operation.

රූපය 1.1: කෝණික view of the Mopar 56038978AL Rear View Back Up Camera, showing the lens and connector.

ප්රධාන ලක්ෂණ:

• වාහන විශේෂිත ගැළපුම: Engineered for precise fitment in compatible vehicles.
• Genuine Mopar Part: Ensures compatibility and performance as per manufacturer standards.
• සංයුක්ත නිර්මාණය: Product dimensions are approximately 3 x 2 x 2 inches.
• සැහැල්ලු: Weighs approximately 1.44 ounces.

2. ගැළපුම

The Mopar 56038978AL Rear View Back Up Camera is compatible with the following vehicle models:

• 2013-2015 Dodge RAM 1500
• 2013-2015 Dodge RAM 2500
• 2013-2015 Dodge RAM 3500
• 2013-2015 Dodge RAM 4500
• 2013-2013 Dodge RAM 5500
• 2013-2015 Dodge Viper
• 2015 ක්‍රයිස්ලර් 200

For verification of application, it is recommended to consult a Mopar service center or provide your Vehicle Identification Number (VIN) to a certified dealer.

3 ආරක්ෂිත තොරතුරු

Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury or damage to the vehicle.

• ඕනෑම විදුලි වැඩක් ආරම්භ කිරීමට පෙර වාහනයේ ජ්වලනය නිවා දමා බැටරිය විසන්ධි කර ඇති බවට වග බලා ගන්න.
• ආරක්ෂිත වීදුරු සහ අත්වැසුම් වැනි සුදුසු පුද්ගලික ආරක්ෂක උපකරණ පළඳින්න.
• Refer to your vehicle's service manual for specific instructions regarding tailgate removal or access.
• Do not force connectors; ensure proper alignment before pushing them together.
• After installation, verify that all components are securely fastened and that the camera functions correctly before driving.

4. පැකේජ අන්තර්ගතය

The package for the Mopar 56038978AL Rear View Back Up Camera typically includes:

• 1 x Mopar 56038978AL Rear View Back Up Camera unit

Inspect the package upon receipt to ensure all components are present and undamaged.

5. පිහිටුවීම සහ ස්ථාපනය

This section outlines the general steps for replacing the rear view camera. Specific vehicle configurations may vary. It is recommended to consult a professional if you are unsure about any step.

අවශ්ය මෙවලම්:

• T25 Hexagonal Screwdriver (Torx bit)
• T15 Hexagonal Screwdriver (Torx bit) or small socket wrench with T15 bit
• 8mm Socket Wrench (for some models)
• Magnetic retrieval tool (optional, but recommended for small screws)
• Trim removal tools (optional)

ස්ථාපන පියවර:

1. වාහනය සූදානම් කරන්න: Park the vehicle on a level surface, engage the parking brake, and turn off the ignition. Disconnect the negative terminal of the vehicle's battery for safety.
2. Access Tailgate Interior: Lower the tailgate. Using a T25 hexagonal screwdriver, remove the approximately 8 screws securing the inner access panel on the tailgate. Carefully remove the access panel.
3. Locate and Remove Old Camera: The camera unit is typically mounted near the tailgate handle. It is usually secured by two T15 Torx screws. Use a T15 bit (or an 8mm socket wrench if applicable for tailgate handle removal) to unscrew these. A magnetic bit or retrieval tool can prevent screws from falling into inaccessible areas.
4. රැහැන් විසන්ධි කරන්න: Once the screws are removed, carefully pull the old camera unit out. Disconnect the electrical connector from the back of the camera. Note the orientation of the connector, often indicated by a green line for proper alignment.
5. Install New Camera: Connect the electrical plug to the new Mopar 56038978AL camera, ensuring the green alignment line (if present) matches. Insert the new camera into its mounting position and secure it with the two T15 Torx screws.
6. Reassemble Tailgate: Reattach the inner access panel to the tailgate using the T25 hexagonal screws. Ensure all screws are tightened securely.
7. බැටරිය නැවත සම්බන්ධ කර පරීක්ෂා කරන්න: Reconnect the negative terminal of the vehicle's battery. Start the vehicle and shift into reverse to test the new camera's functionality. Verify that the image is clear and displays correctly on your vehicle's screen.

රූපය 5.1: පසුපස view of the camera, highlighting the mounting brackets and electrical connector for installation reference.

6. මෙහෙයුම් උපදෙස්

The Mopar 56038978AL Rear View Back Up Camera operates automatically in conjunction with your vehicle's transmission system.

• When the vehicle is shifted into ආපසු හරවන්න, the camera automatically activates and displays the rearward view on your vehicle's infotainment screen.
• The display may include dynamic guidelines that assist with parking and maneuvering, depending on your vehicle's factory configuration.
• When the vehicle is shifted out of ආපසු හරවන්න, the camera display will typically revert to the previous screen or turn off.

Always use the rear view camera as an aid and not as a sole means of rearward visibility. Always check your surroundings visually before backing up.

7. නඩත්තු කිරීම

To ensure optimal performance and longevity of your Mopar Rear View Back Up Camera, follow these maintenance guidelines:

• කාච පිරිසිදු කිරීම: කැමරා කාචය මෘදු, d පිරිසිදු කරන්නෙකු භාවිතයෙන් වරින් වර පිරිසිදු කරන්න.amp cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals that could scratch the lens.
• පරීක්ෂාව: Regularly inspect the camera unit and its wiring for any signs of damage, corrosion, or loose connections.
• පාරිසරික සාධක: Protect the camera from extreme temperatures, direct impacts, and prolonged exposure to harsh weather conditions.

8. දෝශ නිරාකරණය

If you experience issues with your rear view camera, consider the following troubleshooting steps:

If these steps do not resolve the issue, contact a certified Mopar service technician for further assistance.

9. පිරිවිතර

10. වගකීම් සහ සහාය

As a genuine Mopar part, this product is typically covered by Mopar's standard parts warranty. Warranty terms and conditions may vary based on purchase location and installation method (e.g., dealer installed vs. self-installed).

For specific warranty details, claims, or technical support, please contact your authorized Mopar dealer or visit the official Mopar website. Ensure you have your proof of purchase and vehicle information available.

Figure 10.1: Mopar brand logo, representing genuine parts for Chrysler, Dodge, Jeep, and RAM vehicles.