GVS SPR492

GVS Elipse SPR492 ABEK1P3 Dust/Vapor Combination Replacement Filters User Manual

1. හැඳින්වීම

This user manual provides essential information for the correct installation, use, and maintenance of the GVS Elipse SPR492 ABEK1P3 Dust/Vapor Combination Replacement Filters. These filters are designed to be used exclusively with GVS Elipse SPR491/496 half masks. Adherence to these instructions is crucial for ensuring effective respiratory protection and prolonging the lifespan of your filters.

වැදගත් ආරක්ෂක තොරතුරු: Always refer to the complete GVS Elipse half mask manual for comprehensive safety guidelines, limitations, and proper respirator usage. Do not use these filters in environments with unknown contaminants, oxygen-deficient atmospheres, or immediately dangerous to life or health (IDLH) conditions.

2. නිෂ්පාදන අවසන්view

The GVS Elipse SPR492 ABEK1P3 filters are a pair of low-profile, lightweight combination filters offering protection against organic gases and vapors (A), inorganic gases and vapors (B), acid gases (E), ammonia and organic ammonia derivatives (K), and solid and liquid particulates (P3). Their compact design ensures comfort and compatibility with other personal protective equipment.

2.1 ප්රධාන ලක්ෂණ

  • අඩු ගැතිfile design for enhanced visibility and comfort.
  • Lightweight construction reduces user fatigue.
  • Easy and quick replacement mechanism.
  • ABEK1P3 classification for broad spectrum protection.

2.2 පැකේජයේ අන්තර්ගතය

  • One (1) pair of GVS Elipse SPR492 ABEK1P3 Combination Replacement Filters.
GVS Elipse SPR492 ABEK1P3 Combination Replacement Filters

Figure 1: GVS Elipse SPR492 ABEK1P3 Combination Replacement Filters. These filters are designed to attach directly to compatible GVS Elipse half masks.

3. පිහිටුවීම සහ ස්ථාපනය

Proper installation of the filters is critical for ensuring a secure seal and effective protection. Always handle filters with clean hands.

  1. පෙරහන් පරීක්ෂා කරන්න: Before each use, visually inspect both filters for any signs of damage, cracks, or deformities. Ensure the filter media is intact and not visibly soiled. Do not use damaged filters.
  2. Prepare Half Mask: Ensure your GVS Elipse SPR491/496 half mask is clean and free from debris. Locate the filter attachment points on both sides of the mask.
  3. පෙරහන් අමුණන්න: Align the connection point on the filter with the corresponding attachment point on the half mask. Gently push and twist the filter clockwise until it clicks securely into place. Do not overtighten.
  4. Repeat for Second Filter: Attach the second filter to the other side of the half mask following the same procedure.
  5. මුද්‍රා පරීක්ෂාව සිදු කරන්න: After installing both filters, perform a positive and/or negative pressure seal check as described in your GVS Elipse half mask manual. A proper seal is essential for protection. If a proper seal cannot be achieved, do not enter the contaminated area.

4. මෙහෙයුම් උපදෙස්

Once the filters are correctly installed and a seal check has been performed, the respirator system is ready for use.

  • ශ්වසන යන්ත්‍රය පැළඳීම: Don the GVS Elipse half mask with the installed SPR492 filters according to the instructions provided with your half mask. Ensure the straps are adjusted for a comfortable yet secure fit, maintaining the face seal.
  • භාවිතයේ: Breathe normally. The filters will remove specified contaminants from the air.
  • Leaving Contaminated Area: If you detect any odor or taste of contaminants, experience increased breathing resistance, or feel dizzy or nauseous, immediately leave the contaminated area and move to fresh air.
  • පාවිච්චි කරන්න එපා: These filters are not suitable for protection against gases or vapors with poor warning properties (e.g., odorless, tasteless), or in situations where the concentration of contaminants is unknown or exceeds the filter's capacity.

5. නඩත්තු කිරීම

Proper maintenance ensures the longevity and effectiveness of your filters.

5.1 පෙරහන ආදේශ කිරීම

  • Particulate Filters (P3): Replace when breathing resistance becomes noticeably high.
  • Gas/Vapor Filters (ABEK1): Replace immediately if you detect any odor or taste of the contaminant, or if irritation occurs. The service life of gas/vapor filters depends on the concentration of contaminants, humidity, temperature, and breathing rate.
  • සාමාන්ය රීතිය: Always replace both filters simultaneously. Do not attempt to clean or reuse expired or saturated filters.

5.2 ගබඩා කිරීම

  • Store unused filters in their original, sealed packaging in a cool, dry place, away from direct sunlight and contaminants.
  • After use, if filters are not saturated, they can be stored attached to the half mask in a clean, airtight container to prolong their life, especially for gas/vapor protection.

5.3 පිරිසිදු කිරීම

  • The exterior of the filters can be wiped clean with a damp cloth. Do not immerse filters in water or cleaning solutions, as this can damage the filter media.

6. දෝශ නිරාකරණය

මෙම කොටසින් ඔබට මුහුණ දීමට සිදුවිය හැකි පොදු ගැටළු සාකච්ඡා කෙරේ.

  • කලාපය: You detect an odor or taste of contaminants while wearing the respirator.
    විසඳුම: Immediately leave the contaminated area. Check the fit of your half mask and ensure the filters are securely attached. If the issue persists, replace both filters.
  • කලාපය: Breathing becomes difficult or noticeably restricted.
    විසඳුම: Immediately leave the contaminated area. This indicates that the particulate filter media may be clogged. Replace both filters.
  • කලාපය: The filters do not seem to attach securely to the half mask.
    විසඳුම: Ensure you are using compatible GVS Elipse SPR491/496 half masks. Check for any debris or damage on both the filter and mask connection points. Align correctly and twist firmly until a click is heard.

7. පිරිවිතර

ගුණාංගයවිස්තර
ආදර්ශ අංකයSPR492
පෙරහන් වර්ගයABEK1P3 Combination Filter (Organic, Inorganic, Acid Gases, Ammonia, Particulates)
ගැළපුමGVS Elipse SPR491/496 Half Masks
ද්රව්යතාප ප්ලාස්ටික්
පැකේජ මානයන්21.5 x 18.7 x 7.5 සෙ.මී
පැකේජ බර137 ග්රෑම්
නිෂ්පාදකයාGVS
GTIN (ගෝලීය වෙළඳ අයිතම අංකය)05060233801015

8. වගකීම් සහ සහාය

For specific warranty information regarding your GVS Elipse SPR492 ABEK1P3 filters, please refer to the documentation provided with your purchase or visit the official GVS webවෙබ් අඩවිය. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.

For technical support, product inquiries, or further assistance, please contact your authorized GVS dealer or the GVS customer service department. Contact details can typically be found on the GVS official webඅඩවිය.

අදාළ ලියකියවිලි - SPR492

පෙරview GVS Elipse Low Profile Combined Gas & Particulate Safety Respirator User Instructions
Comprehensive user instructions for the GVS Elipse low profile combined gas and particulate safety respirator. Covers applications, filter types, fitting, cleaning, maintenance, storage, warnings, limitations, and service life. Essential guide for occupational safety.
පෙරview GVS ස්මාර්ට් APP V1.4 පරිශීලක අත්පොත
KNX සහ තෙවන පාර්ශවීය ස්මාර්ට් නිවාස උපාංග පාලනය කරන සහ කළමනාකරණය කරන ආකාරය, දර්ශන සැකසීම, හඬ සහායකයින් ඒකාබද්ධ කිරීම සහ SONOS වැනි තෙවන පාර්ශවීය සේවාවන්ට අවසර දෙන ආකාරය විස්තර කරන GVS ස්මාර්ට් APP V1.4 සඳහා පරිශීලක අත්පොත.
පෙරview GVS Gem Series Z10 Smart Home Server User Manual (A-IS03)
User manual for the GVS Gem Series Z10 Smart Home Server (Model A-IS03), detailing its functions, installation, and operation for building intercom and smart home control systems.
පෙරview GVS K-BUS KNX Gateway for RS485/RS232 V2.0 User Manual
User manual for the GVS K-BUS KNX Gateway for RS485/RS232 V2.0 (Model BTPG-04/03.1). This document provides technical data, installation, programming, and parameter setting details for integrating Modbus/RS485/RS232 devices with KNX bus systems.
පෙරview GVS K-BUS KNX Gateway for RS485/RS232 User Manual V1.8
This user manual provides comprehensive technical details, installation, and programming guidance for the GVS K-BUS KNX Gateway for RS485/RS232 (V1.8). Learn how to integrate Modbus, RS485, and RS232 devices with KNX home and building control systems.
පෙරview GVS K-BUS KNX Gateway for Tuya ZigBee V2.1 User Manual
This user manual provides detailed technical information, installation, and programming guidance for the GVS K-BUS KNX Gateway for Tuya ZigBee V2.1, enabling seamless integration between KNX and Tuya ZigBee smart home systems.