BFT PhobosKit BT ස්විං ගේට් ක්‍රියාකරු නේවාසික: උපදෙස් අත්පොත

1. හැඳින්වීම

This manual provides essential instructions for the safe installation, operation, and maintenance of the BFT PhobosKit BT Swing Gate Operator Residential. Please read this manual thoroughly before beginning any installation or operation procedures. Proper understanding and adherence to these instructions are crucial for the longevity and safe functioning of the gate operator system.

2 ආරක්ෂිත තොරතුරු

අවවාදයයි: මෙම ආරක්ෂක උපදෙස් පිළිපැදීමට අපොහොසත් වීමෙන් බරපතල තුවාල හෝ දේපළ හානි සිදුවිය හැකිය.

• Installation and repair must be performed by qualified personnel only.
• කිසියම් සේවාවක් හෝ නඩත්තුවක් සිදු කිරීමට පෙර විදුලිය විසන්ධි කරන්න.
• සියලුම විදුලි සම්බන්ධතා දේශීය සහ ජාතික විදුලි කේතයන්ට අනුකූල වන බවට සහතික වන්න.
• අත් සහ ලිහිල් ඇඳුම් චලනය වන කොටස් වලින් ඈත් කරන්න.
• ළමයින්ට ගේට්ටුව අසල සෙල්ලම් කිරීමට හෝ පාලන ක්‍රියාත්මක කිරීමට ඉඩ නොදෙන්න.
• The gate operator is designed for swing gates only. Do not use for other applications.

3. නිෂ්පාදන අවසන්view සහ සංරචක

The BFT PhobosKit BT Swing Gate Operator Residential is a comprehensive kit designed for automating residential swing gates. The kit includes the following main components:

• Linear Actuator: The primary mechanism for opening and closing the gate.
• පාලක මණ්ඩලයක්: The electronic brain of the system, managing all operations.
• කේබල් කිරීම: For electrical connections and communication between components.
• Reflective Photocell: A safety device to detect obstructions in the gate's path.
• Radio Transmitters (2 units): For remote control of the gate operator.
• සවිකරන වරහන්: For securing the actuator to the gate and post.

Figure 1: Main components of the BFT PhobosKit BT Swing Gate Operator. Shown are the linear actuator, the control board enclosure, two radio transmitters, and a reflective photocell.

4. පිහිටුවීම සහ ස්ථාපනය

Installation of the BFT PhobosKit BT Swing Gate Operator requires careful planning and adherence to electrical and mechanical safety standards. It is recommended that installation be performed by a certified professional.

4.1 අඩවි සකස් කිරීම

• Ensure the gate operates smoothly manually before installing the operator.
• Clear any obstructions from the gate's swing path.
• Verify adequate space for the actuator and control board.

4.2 ක්‍රියාකරු සවි කිරීම

Securely attach the linear actuator to the gate and post using the provided mounting brackets. Ensure the actuator is level and aligned correctly to prevent undue stress on the gate and operator.

4.3 විදුලි සම්බන්ධතා

The system operates on 24VDC, powered by a 120VAC input. Connect the control board to the main power supply and the actuator according to the wiring diagram provided in the separate detailed installation guide. Install the reflective photocell and radio receiver as per instructions to ensure proper safety and remote control functionality.

5. මෙහෙයුම් උපදෙස්

Once installed and configured, the BFT PhobosKit BT Swing Gate Operator can be operated using the provided radio transmitters.

5.1 දුරස්ථ පාලක මෙහෙයුම

• Press the designated button on the radio transmitter to open or close the gate.
• A second press during operation will typically stop the gate. A third press will reverse its direction.
• Ensure a clear line of sight to the gate and that no obstructions are present before operating.

5.2 ආරක්ෂිත විශේෂාංග

The system includes a reflective photocell that detects obstructions. If an obstruction is detected while the gate is closing, the gate will stop and reverse. The built-in thermal overload and torque limiting features protect the motor from damage due to excessive force or overheating.

6. නඩත්තු කිරීම

Regular maintenance ensures optimal performance and extends the lifespan of your gate operator.

• මාසිකව: Inspect the gate's movement for any signs of friction or misalignment. Check all mounting hardware for tightness.
• කාර්තුමය: Clean the reflective photocell lenses to ensure proper operation. Check electrical connections for corrosion or damage.
• වාර්ෂිකව: Have a qualified technician inspect the entire system, including motor, gears, and safety devices.

7. දෝශ නිරාකරණය

If you encounter issues with your gate operator, refer to the following common troubleshooting steps:

• Gate not responding to remote: Check remote battery. Ensure the receiver is powered and connected.
• අනපේක්ෂිත ලෙස ගේට්ටුව නතර වේ: Check for obstructions in the gate's path, especially near the photocell. Clean photocell lenses.
• Gate moves slowly or with difficulty: Inspect the gate hinges and wheels for friction. Ensure the actuator is not obstructed.
• බලයක් නැත: ප්‍රධාන බල සැපයුම සහ පරිපථ කඩනය පරීක්ෂා කරන්න.

For persistent issues, contact a qualified service technician.

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information, please refer to the documentation provided with your purchase or contact BFT customer support directly. Technical support and service inquiries should be directed to your authorized BFT dealer or installer.