1. ආරක්ෂිත උපදෙස්
මෙම බල මෙවලම සමඟ සපයා ඇති සියලුම ආරක්ෂක අනතුරු ඇඟවීම්, උපදෙස්, නිදර්ශන සහ පිරිවිතර සැමවිටම කියවා තේරුම් ගන්න. පහත ලැයිස්තුගත කර ඇති සියලුම උපදෙස් අනුගමනය කිරීමට අපොහොසත් වීමෙන් විදුලි කම්පනය, ගින්න සහ/හෝ බරපතල තුවාල සිදුවිය හැකිය.
- පුද්ගලික ආරක්ෂක උපකරණ: Always wear appropriate eye protection (safety glasses), hearing protection, heavy-duty gloves, and sturdy footwear when operating the hedge trimmer. Long pants and sleeves are also recommended.
- වැඩ ප්රදේශයේ ආරක්ෂාව: Keep the work area clean and well-lit. Cluttered or dark areas invite accidents. Operate the hedge trimmer only in daylight or good artificial light. Keep children and bystanders away while operating a power tool.
- විදුලි ආරක්ෂාව: පයිප්ප, රේඩියේටර්, රේන්ජ් සහ ශීතකරණ වැනි පස් සහිත හෝ භූගත මතුපිට සමඟ ශරීර සම්බන්ධතා වළක්වා ගන්න. ඔබේ ශරීරය පස් සහිත නම් හෝ භූගත කර ඇත්නම් විදුලි කම්පනය ඇතිවීමේ අවදානම වැඩි වේ. වැසි හෝ තෙත් තත්වයන්ට බල මෙවලම් නිරාවරණය නොකරන්න. බල මෙවලමකට ඇතුළු වන ජලය විදුලි කම්පනයේ අවදානම වැඩි කරයි.
- මෙවලම් මෙහෙයුම: Always hold the hedge trimmer with both hands firmly on the handles. Ensure the two-hand safety switch is engaged before starting. Never operate the tool with one hand.
- බ්ලේඩ් ආරක්ෂාව: Keep hands and feet away from the cutting blades. Do not attempt to remove cut material or hold material to be cut when blades are moving. Ensure the blade guard is in place when the tool is not in use or during transport.
- බැටරි ආරක්ෂාව: Use only the specified battery pack and charger. Do not modify or attempt to repair the battery pack or charger. Protect the battery from heat, direct sunlight, and moisture.
- නඩත්තු: Disconnect the battery pack before making any adjustments, changing accessories, or storing power tools. Regularly inspect the blades for damage and ensure all fasteners are tight.
2. පැකේජ අන්තර්ගතය
Carefully unpack the product and check that all items listed below are present and undamaged. If any parts are missing or damaged, contact your retailer immediately.
- Einhell GE-CH 1855/1 Li රැහැන් රහිත හෙජ් ට්රයිමර්
- Power X-Change 18V Lithium-Ion Battery
- වේගවත් චාජරය
- බ්ලේඩ් ගාඩ්
- පරිශීලක අත්පොත
3. නිෂ්පාදන අවසන්view
Familiarize yourself with the components of your Einhell Cordless Hedge Trimmer before operation.
රූපය 3.1: The Einhell GE-CH 1855/1 Li Cordless Hedge Trimmer, showcasing its ergonomic design and long cutting blade.
රූපය 3.2: Detail of the two-hand safety switch and the rotating rear handle, allowing for comfortable vertical and horizontal cutting.
රූපය 3.3: Illustration highlighting the precision of the laser-cut and diamond-ground steel blades for clean and efficient cutting.
රූපය 3.4: The bumper guard, which protects the blades from impact and includes a convenient holder for wall mounting storage.
The Einhell GE-CH 1855/1 Li features robust laser-cut and diamond-ground steel blades for precise cutting. It is equipped with a two-hand safety switch for secure operation and a metal gearing system designed for extended durability. The integrated bumper guard not only protects the blades but also provides a practical wall mount for storage.
4. පිහිටුවීම
4.1. බැටරිය ආරෝපණය කිරීම
රූපය 4.1: The Einhell Power X-Change Fast Charger.
රූපය 4.2: The Einhell Power X-Change 18V Lithium-Ion Battery.
- Connect the fast charger to a suitable power outlet. The indicator light on the charger will illuminate.
- Slide the Power X-Change battery pack onto the charger until it clicks into place.
- The charger's indicator light will change to show that charging is in progress. Refer to the charger's manual for specific light patterns.
- Once the battery is fully charged, the indicator light will change again (e.g., solid green). Disconnect the battery from the charger.
4.2. බැටරිය ස්ථාපනය කිරීම
- Ensure the hedge trimmer is switched off and the blades are stationary.
- Align the charged battery pack with the battery compartment on the hedge trimmer.
- Slide the battery into the compartment until it securely locks into place with an audible click.
- To remove the battery, press the release button(s) on the battery pack and slide it out of the compartment.
4.3. තල ආරක්ෂකය සවි කිරීම
The blade guard should always be attached when the tool is not in use or during transport to prevent accidental contact with the blades.
- With the hedge trimmer switched off and the battery removed, carefully slide the blade guard over the cutting blades.
- Ensure the guard fully covers the entire length of the blades and is securely seated.
5. මෙහෙයුම් උපදෙස්
5.1. ආරම්භ කිරීම සහ නැවැත්වීම
- බැටරිය සම්පූර්ණයෙන්ම ආරෝපණය වී නිවැරදිව ස්ථාපනය කර ඇති බවට වග බලා ගන්න.
- Hold the hedge trimmer firmly with both hands, one on the front handle and one on the rear handle.
- To start the tool, simultaneously press and hold both the front safety switch and the rear trigger switch. The blades will begin to move.
- To stop the tool, release either the front safety switch or the rear trigger switch. The blades will stop moving.
5.2. General Cutting Tips
රූපය 5.1: Proper technique for trimming a hedge with the Einhell cordless hedge trimmer.
- Inspect the Hedge: Before starting, check the hedge for any foreign objects such as wires, fences, or hidden debris that could damage the blades.
- ප්රදේශය හිස් කරන්න: Ensure the area around the hedge is clear of people, pets, and obstacles.
- කැපුම් චලනය: Use a smooth, sweeping motion to cut the hedge. For best results, cut the top of the hedge first, then the sides.
- Blade Capacity: The hedge trimmer is designed for trimming branches up to a certain diameter (refer to specifications). Do not force the blades through thicker branches.
- බැටරි ආයු කාලය: Monitor the battery charge level. If the cutting performance decreases, it may indicate a low battery.
6. නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ හෙජ් ට්රයිමරයේ ආයු කාලය සහ ප්රශස්ත ක්රියාකාරිත්වය සහතික කරයි. ඕනෑම නඩත්තුවක් සිදු කිරීමට පෙර සෑම විටම බැටරිය විසන්ධි කරන්න.
6.1 පිරිසිදු කිරීම
- After each use, remove any debris, leaves, and sap from the blades and housing using a stiff brush or cloth.
- Do not use water or cleaning solvents directly on the tool, as this can damage electrical components.
- Clean the ventilation slots to ensure proper airflow and prevent overheating.
6.2. තල රැකවරණය
- ලිහිසි තෙල්: Apply a light machine oil or blade lubricant to the cutting blades after each use to prevent rust and ensure smooth operation.
- තියුණු කිරීම: If the cutting performance diminishes, the blades may need sharpening. This should be done by a qualified service technician or with appropriate sharpening tools, following manufacturer guidelines.
- පරීක්ෂාව: Regularly inspect the blades for any signs of damage, such as bends, cracks, or excessive wear. Damaged blades should be replaced immediately.
6.3. ගබඩා කිරීම
රූපය 6.1: Storing the hedge trimmer using its integrated wall mount holder.
- Always attach the blade guard before storing the hedge trimmer.
- Store the tool in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
- මෙවලම ළමයින්ට සහ අනවසර පුද්ගලයින්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න.
- For long-term storage, remove the battery from the tool and store it separately in a cool, dry place.
7. දෝශ නිරාකරණය
පාරිභෝගික සහාය සම්බන්ධ කර ගැනීමට පෙර, පොදු ගැටළු සහ ඒවායේ විසඳුම් සඳහා පහත වගුව බලන්න.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| හෙජ් ට්රයිමරය ආරම්භ නොවේ. | Battery not inserted correctly or not charged. Safety switches not engaged. | Ensure battery is fully charged and securely inserted. Press both safety switches simultaneously. |
| කැපුම් කාර්ය සාධනය අඩු වීම. | Blades are dull or dirty. Battery charge is low. | Clean and lubricate blades. Sharpen blades if necessary. Recharge or replace battery. |
| මෙහෙයුම අතරතුර මෙවලම නතර වේ. | Overload protection activated. Battery is depleted. | Release switches, wait a few moments, then restart. Avoid cutting overly thick branches. Recharge battery. |
| අසාමාන්ය ශබ්දය හෝ කම්පනය. | ලිහිල් කොටස් හෝ හානි වූ තල. | Stop the tool immediately. Inspect for loose screws or damaged blades. If problem persists, seek professional service. |
8. පිරිවිතර
Technical data for the Einhell GE-CH 1855/1 Li Cordless Hedge Trimmer.
| විශේෂාංගය | වටිනාකම |
|---|---|
| ආකෘතිය | GE-CH 1855/1 ලී |
| බලශක්ති ප්රභවය | 18V DC (Power X-Change Battery) |
| කැපුම් දිග | 55 cm (අඟල් 22) |
| Blade Length (Overall) | 62 සෙ.මී |
| බ්ලේඩ් ද්රව්ය | Laser-cut, Diamond-ground Steel |
| පැටවීමේ වේගය | 2200 RPM |
| නිෂ්පාදන මානයන් (L x W x H) | 100.5 x 17 x 13 සෙ.මී |
| අයිතමයේ බර | කිලෝ ග්රෑම් 2.6 කි |
| බැටරි වර්ගය | ලිතියම්-අයන (ඇතුළත්) |
| චාජර් වර්ගය | Fast Charger (included) |
9. වගකීම් සහ සහාය
Einhell offers extended warranty services for its products, ensuring quality and durability.
9.1. දිගු වගකීම්
Einhell extends the warranty for all Power X-Change batteries and Einhell devices to 3 years. This extended warranty is a testament to the quality and longevity of the products.
9.2. Activating Warranty
To activate the additional warranty services, your Einhell product must be registered on the official Einhell website within 30 days of purchase. Please visit the Einhell official website for detailed instructions and the registration portal.
9.3. පාරිභෝගික සහාය
For further assistance, technical queries, or spare parts, please contact Einhell customer support. Refer to the contact information provided on the official Einhell webඅඩවියේ හෝ ඔබේ නිෂ්පාදන ඇසුරුම්වල.
