Clear-Com CC-110-X5

Clear-Com CC-110-X5 Single On-Ear Headset Instruction Manual

ආකෘතිය: CC-110-X5 | වෙළඳ නාමය: පැහැදිලි-කොම්

1. හැඳින්වීම සහ අවසන්view

This manual provides comprehensive instructions for the proper setup, operation, and maintenance of your Clear-Com CC-110-X5 Single On-Ear Headset. The CC-110-X5 is a premium lightweight headset designed for professional communication, featuring high-performance headphones and a cardioid dynamic microphone for clear audio transmission and reception.

The headset's flexible design ensures comfort during extended use, and it includes options for both soft leatherette and foam ear pads to suit individual preferences.

Clear-Com CC-110-X5 Single On-Ear Headset with microphone boom extended

Figure 1: Clear-Com CC-110-X5 Headset. This image shows the headset with its single ear cup, adjustable headband, and microphone boom.

2. නිෂ්පාදන ලක්ෂණ

  • Single On-Ear Design: Allows for situational awareness while providing clear audio.
  • High-Performance Headphones: Delivers excellent audio fidelity for monitoring.
  • Cardioid Dynamic Microphone: Captures voice clearly while minimizing background noise.
  • 5-Pin Male XLR Connector: Standard professional audio connection.
  • Lightweight and Flexible Design: Engineered for comfort during prolonged use.
  • හුවමාරු කළ හැකි කන් පෑඩ්: Includes both soft leatherette and foam ear pads for user preference.
  • ආපසු ඇද ගත හැකි කේබලය: For convenient storage and management.

3. සැකසුම් උපදෙස්

3.1 හෙඩ්සෙට් එක සම්බන්ධ කිරීම

  1. Locate the 5-pin male XLR connector at the end of the headset cable.
  2. Identify the corresponding 5-pin female XLR input on your intercom system, audio mixer, or compatible device.
  3. Align the pins and firmly insert the headset connector into the device's input until it clicks securely into place.

3.2 Adjusting the Headset for Comfort

  1. හෙඩ්බෑන්ඩ් ගැලපීම: Gently extend or retract the headband slides on both sides to fit your head comfortably. The ear cup should rest securely on one ear.
  2. Microphone Boom Positioning: Pivot the microphone boom arm to bring the microphone capsule approximately 1-2 inches (2.5-5 cm) from the corner of your mouth. Ensure the microphone is positioned to pick up your voice directly.
  3. Ear Pad Selection: The headset comes with both leatherette and foam ear pads. To change, gently peel off the installed ear pad and press the desired ear pad onto the ear cup, ensuring it is securely attached around the rim.
Clear-Com CC-110-X5 Headset with foam ear pad

Figure 2: Headset with Foam Ear Pad. This image shows the headset with the foam ear pad installed, offering a different comfort option.

4. මෙහෙයුම් උපදෙස්

4.1 මූලික මෙහෙයුම

  • Once connected, ensure your audio device (intercom, mixer) is powered on and configured for the headset input.
  • Adjust the volume on your connected device to a comfortable listening level.
  • Speak clearly into the microphone. The cardioid pickup pattern is designed to focus on your voice, so proper microphone positioning is crucial for optimal performance.

4.2 Microphone Muting (if applicable)

The CC-110-X5 headset itself does not feature an integrated mute button. Muting functionality is typically controlled by the connected intercom system or audio device. Refer to your device's manual for specific instructions on microphone muting.

5. නඩත්තු කිරීම

5.1 පිරිසිදු කිරීම

  • කන් පෑඩ්: Gently wipe ear pads with a soft, damp cloth. For leatherette pads, a mild soap solution can be used, followed by wiping with a clean, damp cloth. Allow to air dry completely before use. Foam pads can be carefully removed and hand-washed with mild soap, then thoroughly rinsed and air-dried.
  • හෙඩ්සෙට් ශරීරය: Use a soft, dry cloth to wipe down the headband and ear cup exterior. Avoid using harsh chemicals or abrasive cleaners.
  • මයික්‍රෆෝනය: Carefully wipe the microphone windscreen with a dry or slightly damp cloth. Do not saturate the microphone capsule.

5.2 ගබඩා කිරීම

Store the headset in a clean, dry environment away from extreme temperatures and direct sunlight. Avoid coiling the cable tightly to prevent damage. Utilizing a headset bag or case can help protect it from dust and physical damage.

6. දෝශ නිරාකරණය

ගැටලුවවිය හැකි හේතුවවිසඳුම
හෙඩ්ෆෝන් වලින් ශ්‍රව්‍ය නැත
  • Headset not fully connected.
  • Volume on connected device is too low or muted.
  • Connected device is off or misconfigured.
  • Ensure the 5-pin XLR connector is securely seated.
  • සම්බන්ධිත උපාංගයේ ශබ්දය වැඩි කරන්න.
  • Check power and settings of the connected audio equipment.
මයික්‍රෆෝනය ශ්‍රව්‍ය සම්ප්‍රේෂණය නොකරයි
  • මයික්‍රෆෝන බූම් නිවැරදිව ස්ථානගත කර නොමැත.
  • Microphone input on connected device is muted or gain is too low.
  • දෝෂ සහිත කේබල් සම්බන්ධතාවය.
  • Adjust microphone boom to be 1-2 inches from your mouth.
  • Check microphone settings and gain levels on the connected device.
  • Ensure XLR connector is secure. Try a different cable if available.
දුර්වල ශ්‍රව්‍ය ගුණාත්මකභාවය (ස්ථිතික, විකෘති)
  • ලිහිල් සම්බන්ධතාවය.
  • අනෙකුත් ඉලෙක්ට්‍රොනික උපාංග වලින් ඇතිවන බාධා.
  • Input gain on device is too high (causing distortion).
  • සියලුම සම්බන්ධතා ආරක්ෂිත බව තහවුරු කරන්න.
  • Move headset or connected device away from potential sources of interference.
  • Reduce input gain on the connected device.

If you continue to experience issues after attempting these troubleshooting steps, please contact Clear-Com customer support or your authorized dealer for further assistance.

7. පිරිවිතර

ආදර්ශ අංකයCC-110-X5
වෙළඳ නාමයපැහැදිලි-කොම්
සම්බන්ධතා තාක්ෂණයරැහැන්ගත
හෙඩ්ෆෝන් ජැක්XLR (5-පින් පිරිමි)
හෙඩ්ෆෝන් කන් ස්ථානගත කිරීමකණ මත
ශ්රව්ය ධාවක වර්ගයගතික ධාවකය
සංඛ්යාත පරාසයහර්ට්ස් 20 - හර්ට්ස් 20,000
මයික්රෆෝන වර්ගයCardioid Dynamic
අමතර විශේෂාංගසැහැල්ලු, මයික්‍රෆෝනය ඇතුළත්
ගැළපෙන උපාංගMusic Production Equipment, Laptops, Desktops (with appropriate XLR interface)
කේබල් විශේෂාංගආපසු ගත හැකි
වර්ණයකළු
නිෂ්පාදන මානයන්10 x 6 x 9 අඟල් (25.4 x 15.24 x 22.86 cm)
අයිතමයේ බරකිලෝග්‍රෑම් 0.34 (අවුන්ස 11.99)
UPC642892783847

8. වගකීම් සහ සහාය

Clear-Com products are manufactured to high standards and are backed by a limited warranty. For specific warranty terms and conditions applicable to your CC-110-X5 headset, please refer to the warranty information provided with your purchase or visit the official Clear-Com webඅඩවිය.

For technical support, service, or inquiries regarding your headset, please contact Clear-Com customer service directly. Contact information can typically be found on the Clear-Com official webඅඩවියෙන් හෝ ඔබේ බලයලත් අලෙවිකරු හරහා.

සබැඳි සම්පත්: www.clearcom.com

අදාළ ලියකියවිලි - CC-110-X5

පෙරview Clear-Com CC-300 සහ CC-400 ඉන්ටර්කොම් හෙඩ්සෙට් දත්ත පත්‍රිකාව
වෘත්තීය ශ්‍රව්‍ය යෙදුම් සඳහා ප්‍රධාන විශේෂාංග, තාක්ෂණික පිරිවිතර, ක්‍රියාකාරිත්වය සහ ඇණවුම් කේත ඇතුළුව Clear-Com හි CC-300 (තනි-කන්) සහ CC-400 (ද්විත්ව-කන්) ඉන්ටර්කොම් හෙඩ්සෙට් පිළිබඳ සවිස්තර තොරතුරු.
පෙරview Clear-Com Arcadia R4.0 මධ්‍යම ස්ථාන පරිශීලක මාර්ගෝපදේශය
Clear-Com Arcadia R4.0 මධ්‍යම ස්ථානය සඳහා වන පුළුල් පරිශීලක මාර්ගෝපදේශය, එහි විශේෂාංග, ස්ථාපනය, වින්‍යාසය, පද්ධති උදාහරණ විස්තර කරයි.ampවෘත්තීය ඉන්ටර්කොම් පද්ධති සඳහා තාක්ෂණික පිරිවිතර.
පෙරview Clear-Com MR-102A දුරස්ථ හෙඩ්සෙට් ස්ථානය: උපදෙස් සහ සේවා අත්පොත
Clear-Com MR-102A දුරස්ථ හෙඩ්සෙට් ස්ථානය සඳහා සවිස්තර උපදෙස් සහ සේවා අත්පොත, ස්ථාපනය, ක්‍රියාකාරිත්වය, මෙහෙයුම් න්‍යාය, කොටස් සහ පිරිවිතර ආවරණය කරයි. රැහැන් රූප සටහන්, පාලන විස්තර සහ තාක්ෂණික දත්ත ඇතුළත් වේ.
පෙරview බ්ලූටූත් ඉක්මන් ආරම්භක මාර්ගෝපදේශය සහිත FreeSpeak II 1.9 බෙල්ට්පැක්
Clear-Com FreeSpeak II 1.9 පටි පැක් සඳහා ඉක්මන් ආරම්භක මාර්ගෝපදේශය, බ්ලූටූත් හෙඩ්සෙට් යුගල කිරීම, රැහැන් රහිත මාදිලි සක්‍රීය කිරීම සහ පැති නාද වින්‍යාසය විස්තර කරයි.
පෙරview Clear-Com EHX පරිශීලක මාර්ගෝපදේශය: Eclipse HX වින්‍යාස මෘදුකාංගය
මෙම පරිශීලක මාර්ගෝපදේශය EHX මෘදුකාංගය භාවිතයෙන් Clear-Com Eclipse HX පද්ධතිය වින්‍යාස කිරීම පිළිබඳ සවිස්තරාත්මක උපදෙස් සහ විස්තර සපයයි. වෘත්තීය සන්නිවේදනය සඳහා පද්ධති සැකසුම, සංරචක සහ උසස් විශේෂාංග ගැන ඉගෙන ගන්න.
පෙරview Clear-Com Eclipse 13.1 HX (EHX) Software User Guide
Comprehensive user guide for Clear-Com's Eclipse 13.1 HX (EHX) Configuration Software, detailing system setup, hardware configuration, panel programming, and advanced features for professional intercom systems.