1 ආරක්ෂිත තොරතුරු
වැදගත් ආරක්ෂක උපදෙස්:
- Protect the unit with appropriate circuit breakers or fuses according to the nameplate.
- සැපයුම් පරිමාව බව සහතික කර ගන්නtagඊ (වෝල්ට්) නාම පුවරුවේ දක්වා ඇති ඒවාට අනුරූප වේ.
- මෙම ඒකකය පදනම් විය යුතුය. තඹ සන්නායක පමණක් භාවිතා කරන්න.
- 75°C (167°F) සඳහා සුදුසු බල ඊයම් භාවිතා කරන්න.
- ස්ථාපනය, අළුත්වැඩියා කිරීම සහ පිරිසිදු කිරීමට පෙර පරිපථ කඩනය / ෆියුස් ඒකකය වෙත බල සැපයුම විසන්ධි කරන්න.
- Ensure that the unit is designed for the intended use (consult the product catalog or a representative if necessary).
- නිර්දේශිත තාපන ධාරිතාව: 1.25 W/ඝන අඩි (0.03 m³).
2. නිෂ්පාදන අවසන්view
The Stelpro Uniwatt UHC2002WCW is a modern, surface-mounted convector heater designed for quiet operation and efficient heating in various indoor spaces. This model provides 2000 watts of heating capacity at 240V (1500W at 208V) and requires an external wall thermostat for temperature control.
ප්රධාන ලක්ෂණ:
- තාපන ධාරිතාව: 2000W (240V) / 1500W (208V), suitable for large rooms.
- පාලනය: Requires an external wall thermostat (sold separately).
- නිහඬ මෙහෙයුම: Engineered for minimal noise.
- නිර්මාණය: Sleek, modern look with rounded corners and a durable steel cabinet.
- ස්ථාපනය: Designed for surface mounting with a concealed bracket.
- ද්රව්ය: 22-gauge steel front and cabinet.
- විශේෂ ලක්ෂණය: Cool Touch Exterior.
නිෂ්පාදන සංරචක:
This image displays the front of the Stelpro Uniwatt UHC2002WCW convector heater, highlighting its clean white finish and the top air outlet grille.
සවිස්තරාත්මක view of the heater's durable white finish, which is an epoxy-polyester powdercoat designed for a crisp matte look.
මෙම රූපයේ දැක්වෙන්නේ පැති වෘත්තිකයෙකිfile of the convector heater, emphasizing its slim design which allows it to blend discreetly into any room.
An illustration detailing the physical dimensions of the heater, including its width, height, and depth, crucial for planning installation space.
3. පිහිටුවීම සහ ස්ථාපනය
This convector heater is designed for surface mounting and hardwired electric connection. Ensure all safety precautions are followed before beginning installation.
3.1 Determining Heating Requirements:
Before installation, determine the appropriate wattage for your space. The recommended heating capacity is 1.25 W per cubic foot (0.03 m³).
This table provides a guide to determine the required power (in watts) based on the area to be heated (in square feet or square meters), helping users select the correct heater for their space.
3.2 Mounting the Heater:
The heater features a concealed mounting bracket for a clean and professional appearance. Refer to the detailed instructions provided in the packaging for specific mounting steps.
This image illustrates the concealed mounting bracket, which allows the heater to be securely attached to the wall while maintaining a sleek, integrated look.
This image highlights the ease of installation for the convector heater, emphasizing its user-friendly design for mounting.
3.3 විදුලි සම්බන්ධතාවය:
This unit requires a 240V hardwired electric connection. Ensure the power supply is off at the circuit breaker before making any electrical connections. Connect the black and red wires, and ensure the ground wire is securely attached.
A diagram showing the necessary wiring for a 240V hardwired connection, including the black, red, and ground wires, for safe and proper electrical setup.
Video: Stelpro SOR1 High-End Convector Overview
මෙම වීඩියෝව අවසන් කිරීමක් සපයයිview of a Stelpro high-end convector, demonstrating its features and design, which may be similar to the UHC2002WCW model.
4. මෙහෙයුම
The UHC2002WCW convector heater operates in conjunction with an external wall thermostat (sold separately). This thermostat will control the heater's on/off cycles to maintain the desired room temperature.
වොට් 4.1tage සිටුවම්:
The heater includes an internal switch to select between 1000W and 2000W output. This allows for flexibility based on the heating needs of the room. To adjust the wattage, the front panel must be removed, and the switch located inside the unit should be toggled. Always ensure the power supply is disconnected before accessing internal components.
This image shows the internal components of the heater, specifically highlighting the switch that allows users to select between 1000W and 2000W heating modes.
4.2 Thermostat Control:
Once installed and wired, the heater will respond to the external wall thermostat. Set the desired temperature on your wall thermostat, and the heater will activate or deactivate to maintain that setting.
5. නඩත්තු කිරීම
Regular maintenance ensures optimal performance and longevity of your convector heater. Always disconnect power at the circuit breaker before performing any maintenance.
- පිරිසිදු කිරීම: Periodically wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the heater.
- දූවිලි ඉවත් කිරීම: Gently vacuum or brush away any dust accumulation from the air intake and outlet grilles.
- පරීක්ෂාව: Annually inspect the power connections and mounting for any signs of wear or damage. If any issues are found, consult a qualified electrician.
6. දෝශ නිරාකරණය
If you experience issues with your heater, refer to the following common troubleshooting steps. For problems not listed here, contact customer support or a qualified electrician.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| තාපකය සක්රිය නොවේ. | No power supply; Thermostat set too low; Internal wattage switch off. | Check circuit breaker/fuse. Ensure thermostat is set above room temperature. Verify internal wattage switch is in 1000W or 2000W position (power off before checking). |
| ප්රමාණවත් තාප ප්රතිදානයක් නොමැත. | වට්tage setting too low; Room size exceeds heater capacity; Airflow obstruction. | Check internal wattage switch (set to 2000W if needed). Ensure heater capacity matches room size. Clear any obstructions from grilles. |
| මෙහෙයුම අතරතුර අසාමාන්ය ශබ්ද. | Loose components; Dust accumulation in fan. | Ensure all mounting screws are tight. Clean fan and internal components (power off first). If noise persists, contact support. |
7. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| වෙළඳ නාමය | ස්ටෙල්ප්රෝ |
| ආදර්ශ අංකය | UHC2002WCW |
| වර්ණය | සුදු |
| නිෂ්පාදන මානයන් | 88.9 x 10 x 44.61 cm (35 x 3.9 x 17.5 inches); 8.57 kg (18.9 lbs) |
| බලය/වොට්tage | 2000 watts (at 240V) |
| වෙළුමtage | වෝල්ට් 240 |
| ද්රව්ය | වානේ |
| විශේෂ ලක්ෂණය | Cool Touch Exterior |
| උනුසුම් ක්රමය | සංවහනය |
| සවිකිරීමේ වර්ගය | වෝල් මවුන්ට් |
| ගෘහස්ථ / එළිමහන් භාවිතය | ගෘහස්ථ |
| ව්යාපාරික ස්ථානය | Stelpro - 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 0A2 |
8. වගකීම් සහ සහාය
Stelpro products are proudly made in Canada. For warranty information, technical support, or service inquiries, please refer to the official Stelpro webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
This image features the "Proudly Made in Canada" logo, indicating the origin of Stelpro products.
