1. හැඳින්වීම
This user manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your ROGER TECHNOLOGY E80/TX52R/2 remote control. This 2-channel fixed code remote operates at 433.92 MHz and features a convenient copy function, allowing it to duplicate signals from compatible existing remotes. Please read this manual thoroughly before using the device to ensure proper functionality and safety.
2 ආරක්ෂිත තොරතුරු
- අහම්බෙන් ක්රියාත්මක වීම හෝ කුඩා කොටස් ශරීරගත වීම වැළැක්වීම සඳහා දුරස්ථ පාලකය දරුවන්ට ළඟාවිය නොහැකි ලෙස තබා ගන්න.
- Do not expose the remote control to water, excessive moisture, or extreme temperatures.
- Avoid dropping or subjecting the remote control to severe impacts.
- Only use the specified battery type (AAA) and ensure correct polarity during installation.
- භාවිතා කරන ලද බැටරි දේශීය රෙගුලාසිවලට අනුව වගකීමෙන් යුතුව බැහැර කරන්න.
- Do not attempt to disassemble or modify the remote control, as this will void the warranty and may cause malfunction.
3. පැකේජ අන්තර්ගතය
සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:
- 1 x ROGER TECHNOLOGY E80/TX52R/2 Remote Control
- 1 x පරිශීලක අත්පොත (මෙම ලේඛනය)
- (Batteries may or may not be included, depending on the retailer. Typically, 1x AAA battery is required.)
4. නිෂ්පාදන අවසන්view
The E80/TX52R/2 remote control is designed for ease of use and reliability. It features two distinct buttons for controlling two separate channels, making it suitable for various applications such as garage doors, gates, or other compatible fixed-code receivers. The integrated copy function allows for simple duplication of existing fixed-code remote signals.
රූපය 1: ඉදිරිපස view of the E80/TX52R/2 Remote Control. Note the two primary control buttons, the LED indicator, and the ROGER TECHNOLOGY branding.
ප්රධාන සංරචක:
- බොත්තම 1: Top left button, typically used for Channel 1.
- බොත්තම 2: Top right button, typically used for Channel 2.
- LED දර්ශකය: Small light at the top center, illuminates during transmission or programming.
- Programming Port/Hole: Small hole at the bottom left, used for specific programming procedures.
5. පිහිටුවීම
5.1 බැටරි ස්ථාපනය
The E80/TX52R/2 remote control requires one AAA battery. To install or replace the battery:
- දුරස්ථ පාලකයේ පිටුපස බැටරි මැදිරි කවරය සොයා ගන්න.
- Carefully slide or unclip the cover to open the compartment.
- Insert one AAA battery, ensuring the correct positive (+) and negative (-) polarity as indicated inside the compartment.
- බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.
5.2 Programming the Remote (Copy Function)
This remote control can copy the signal from an existing fixed-code remote. Ensure your existing remote is functional and has a fixed code operating at 433.92 MHz.
- පවතින කේතය හිස් කරන්න: Press and hold both buttons (Button 1 and Button 2) simultaneously on the new E80/TX52R/2 remote until the LED indicator flashes rapidly (approximately 5-10 seconds). Release both buttons. The LED should now flash slowly, indicating it's ready to learn.
- ඉගෙනුම් මාදිලිය ඇතුළු කරන්න: Press and hold the button on the new remote that you wish to program (e.g., Button 1). The LED will illuminate steadily.
- ස්ථාන දුරස්ථ පාලක: Hold your existing remote control close to the new E80/TX52R/2 remote, ideally back-to-back or side-by-side, ensuring their transmitters are aligned.
- සම්ප්රේෂණ සංඥාව: While holding the button on the new remote, press and hold the corresponding button on your existing remote that you want to copy.
- Confirm Copy: The LED on the new E80/TX52R/2 remote should flash rapidly, then turn solid, indicating a successful copy. Release both buttons.
- අනෙකුත් බොත්තම් සඳහා නැවත කරන්න: If you wish to program the second button, repeat steps 2-5 for Button 2.
- පරීක්ෂණ ක්රියාකාරීත්වය: After programming, test the new remote control with your receiver to ensure it operates correctly.
සටහන: If the LED does not flash rapidly or the copy process fails, ensure the existing remote is transmitting a strong signal and try repositioning the remotes. Some rolling code remotes are not compatible with this copy function.
6. මෙහෙයුම් උපදෙස්
Once programmed, operating the E80/TX52R/2 remote control is straightforward:
- To Activate Channel 1: Press and hold Button 1. The LED indicator will illuminate while the signal is being transmitted. Release the button to stop transmission.
- To Activate Channel 2: Press and hold Button 2. The LED indicator will illuminate while the signal is being transmitted. Release the button to stop transmission.
Ensure you are within the effective operating range of your receiver (up to 10 meters, depending on environmental factors and receiver sensitivity).
7. නඩත්තු කිරීම
- පිරිසිදු කිරීම: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the device in water.
- බැටරි ආදේශනය: Replace the AAA battery when the LED indicator becomes dim or the remote's range decreases significantly. Follow the battery installation steps in Section 5.1.
- ගබඩා: දිගු කාලයක් භාවිතා නොකරන විට සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක දුරස්ථ පාලකය ගබඩා කරන්න.
8. දෝශ නිරාකරණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| ක්රමලේඛනය කිරීමෙන් පසු දුරස්ථ පාලකය ක්රියා නොකරයි. | Incorrect programming; incompatible original remote; low battery. | Re-attempt programming carefully following Section 5.2. Ensure the original remote is fixed code and 433.92 MHz. Replace battery. |
| LED does not light up when pressing a button. | මිය ගිය හෝ වැරදි ලෙස ස්ථාපනය කර ඇති බැටරිය. | බැටරියේ ධ්රැවීයතාව පරීක්ෂා කරන්න හෝ නව AAA බැටරියක් සමඟ ප්රතිස්ථාපනය කරන්න. |
| අඩු කළ මෙහෙයුම් පරාසය. | Low battery; interference; obstruction. | Replace battery. Ensure clear line of sight to receiver. Move away from sources of interference. |
| Cannot clear existing code (LED doesn't flash rapidly). | Buttons not pressed simultaneously or long enough. | Ensure both buttons are pressed firmly and held for the required duration (5-10 seconds). |
9. පිරිවිතර
| විශේෂාංගය | විස්තර |
|---|---|
| ආදර්ශ අංකය | E80/TX52R/2 |
| වෙළඳ නාමය | රොජර් තාක්ෂණය |
| සංඛ්යාතය | 433.92 MHz |
| නාලිකා ගණන | 2 |
| කේත වර්ගය | Fixed Code (with copy function) |
| බලශක්ති ප්රභවය | 1 x AAA බැටරි |
| උපරිම පරාසය | මීටර් 10 (අඩි 33) දක්වා |
| වර්ණය | ලා අළු |
| ගැළපෙන උපාංග | Home automation devices, household appliances (with compatible 433.92 MHz fixed code receivers) |
10. වගකීම් සහ සහාය
For warranty information and technical support, please refer to the documentation provided at the point of purchase or contact your retailer. ROGER TECHNOLOGY products are designed for reliability, and support is available for any operational issues or inquiries.
For further assistance, you may visit the official ROGER TECHNOLOGY website or contact their customer service department. Please have your model number (E80/TX52R/2) ready when seeking support.
