LEVOIT Kyra Himalayan Salt Lamp

හැඳින්වීම

The LEVOIT Kyra Himalayan Salt Lamp is crafted from natural Himalayan salt crystals, designed to provide a warm, ambient glow. This manual provides essential information for the safe and effective use of your salt lamp.

පැකේජයේ අන්තර්ගතය

• 1 x LEVOIT Kyra Himalayan Salt Lamp Crystal Rock
• 1 x 6.5 Ft UL-Listed Power Cord with Touch Brightness Dimmer Switch
• 3 x C7 15 Watt Incandescent Light Bulbs (one pre-installed, two extra)
• 1 x පරිශීලක අත්පොත

ආරක්ෂිත උපදෙස්

• විදුලි ආරක්ෂාව: Ensure the power input is 120V/60Hz. Use only the provided UL-listed power cord and bulbs. Do not use the lamp with damaged cords or plugs.
• තෙතමනය අනතුරු ඇඟවීම: Himalayan salt is hygroscopic, meaning it absorbs moisture from the air. Place the lamp in a dry environment. If the lamp becomes moist, turn it on to a high setting to allow the heat from the bulb to dry the crystal.
• ස්ථානගත කිරීම: l තබන්නamp on a stable, water-resistant surface to protect furniture from potential moisture build-up.
• හැසිරවීම: Handle the salt crystal with care as it can be fragile.
• ළමුන් සහ සුරතල් සතුන්: එල් තබා ගන්නamp out of reach of children and pets to prevent accidental damage or ingestion of salt.

සැලසුම

1. Carefully remove the salt lamp සහ ඇසුරුම්කරණයේ ඇති සියලුම සංරචක.
2. Place the salt crystal securely onto the stainless steel base.
3. Ensure the pre-installed C7 15W bulb is properly seated in the E12 socket.
4. l තබන්නamp පැතලි, ස්ථාවර මතුපිටක් මත.
5. Plug the ETL certified power cord into a standard 120V/60Hz electrical outlet.

Image: The LEVOIT Kyra Himalayan Salt Lamp with its natural crystal rock and stainless steel base, ready for setup.

මෙහෙයුම් උපදෙස්

The LEVOIT Kyra Himalayan Salt Lamp features a touch dimmer switch for easy control of brightness.

1. සක්රිය / අක්රිය කිරීම: Lightly tap the touch dimmer switch once to turn the lamp මත හෝ අක්රිය.
2. දීප්තිය සකස් කිරීම: අතර එල්amp is on, press and hold the touch dimmer switch. The brightness will gradually increase or decrease. Release the switch when the desired brightness level is reached.

Image: A hand operating the touch dimmer switch on the lamp's power cord, illustrating how to adjust brightness.

නඩත්තු කිරීම

පිරිසිදු කිරීම

Regularly dust the salt crystal with a dry, clean cloth. If the crystal becomes moist, turn the lamp on to a high setting for several hours to dry it out.

බල්බ ආදේශ කිරීම

If the bulb needs replacement, use only C7 15W incandescent light bulbs with an E12 socket. Two extra bulbs are included in your package.

1. l පේනුව ගලවන්නamp විදුලිබලාගාරයෙන්.
2. Carefully flip the lamp ඉවරයි.
3. Remove the four screws from the base using a small screwdriver.
4. Gently slide off the base while holding the salt crystal.
5. Carefully set the salt crystal aside.
6. Remove the old bulb from its socket.
7. Install the new C7 15W bulb into the socket.
8. Align the base back onto the salt crystal, ensuring the screw holes are aligned.
9. Replace and tighten all four screws.

දෝෂගවේෂණය

• Lamp ක්‍රියාත්මක නොවේ: Check if the power cord is securely plugged into the outlet and the lamp. Ensure the bulb is properly seated and not burnt out. Try a different outlet.
• Lamp is dim or flickers: The bulb may be loose or nearing the end of its life. Replace the bulb if necessary.
• Lamp is sweating/moist: This is normal for salt lamps in humid environments. Turn the lamp to a high brightness setting and leave it on for several hours to dry the crystal. Ensure the lamp is placed in a dry area.
• Touch dimmer is unresponsive: Ensure your hands are clean and dry when operating the touch switch. If the issue persists, unplug the lamp for a few minutes and then plug it back in.

පිරිවිතර

වගකීම් සහ සහාය

For warranty information or product support, please refer to the warranty card included in your package or contact LEVOIT customer service directly. Keep your purchase receipt for warranty claims.