හැඳින්වීම
This manual provides comprehensive instructions for the Anderic Replacement FAN-9T Thermostatic Remote Control, designed specifically for Hampton Bay ceiling fans.
රූපය: ඉදිරිපස view of the Anderic FAN-9T remote control, showing the display and various control buttons.
ගැළපුම
The Anderic FAN-9T remote control is compatible with Hampton Bay ceiling fans. To ensure compatibility, verify that your original remote control has "FAN-9T" printed on its back. This remote features FCC ID: L3HFAN9T and PN: FAN9TR.
වැදගත් සටහන: This remote control provides on/off functionality for lights and does not support dimming. If your original remote for a Windward II 54-inch Ceiling Fan has a model number starting with "CHQ" (located on the back), you may require the RR7096TR model with a yellow light button, even if your original has a green light button.
ප්රධාන ලක්ෂණ
- ප්රතිලෝම මෙහෙයුම: Easily switch the ceiling fan's rotation direction for optimal airflow in different seasons.
- Thermostatic Function: Set a desired temperature, and the remote will automatically adjust fan speed to maintain a comfortable environment.
- Lights On/Off Control: Conveniently turn your ceiling fan's lights on or off with a dedicated button.
- උෂ්ණත්ව පරිවර්තනය: Switch between Celsius and Fahrenheit temperature displays by holding the TEMP UP and TEMP DOWN buttons simultaneously for 3 seconds.
- බිත්ති සවිකිරීමේ රඳවනය: Includes a wall mount holder for convenient storage and accessibility of the remote.
සැකසුම් උපදෙස්
Before using your new Anderic FAN-9T remote control, follow these steps to install batteries and set the correct code for your ceiling fan receiver.
1. බැටරි ස්ථාපනය
- Remove the battery cover located on the back of the remote control. Press firmly below the arrow and slide the cover off.
- නිවැරදි ධ්රැවීයතාව (+/-) සහතික කරමින්, AAA බැටරි හතරක් (4) ඇතුළු කරන්න.
- බැටරි ආවරණය ප්රතිස්ථාපනය කරන්න.
රූපය: පසුපස view of the remote control with the battery cover removed, revealing the battery slots and DIP switches.
2. Setting the Code (DIP Switches)
The remote control and your ceiling fan receiver must be set to the same code for proper communication. This unit has 16 different code combinations. Ensure your fan is operated in "HIGH SPEED" and the light is in "ON" condition at the switch knob before proceeding.
- දුරස්ථ පාලකයේ කේතය සැකසීම:
- With the battery cover removed, locate the DIP switches inside the battery compartment.
- Slide the code switches to your desired up or down position. (Factory setting is all up. Do not use this position unless it matches your receiver.) Use a small screwdriver or a ballpoint pen to firmly slide the switches.
- Replace the battery cover on the transmitter (remote).
- ලබන්නා මත කේතය සැකසීම:
- Locate the receiver unit within your ceiling fan assembly.
- Slide the code switches on the receiver to the exact same positions (up/down) as you set on your remote control.
Image: Diagram illustrating how to set the code switches on both the remote control (transmitter) and the ceiling fan receiver.
Once both the remote and receiver codes are matched, your remote control should be ready for operation.
මෙහෙයුම් උපදෙස්
Familiarize yourself with the buttons on your Anderic FAN-9T remote control to operate your ceiling fan effectively.
රූපය: කෝණික view of the Anderic FAN-9T remote control, highlighting the button layout.
- විදුලි පංකා වේග පාලනය: Use the "MANUAL LOW" and "HIGH" indicators on the display to adjust fan speed. The remote automatically adjusts fan speed in thermostatic mode.
- FAN AUTO Button: Activates or deactivates the automatic fan speed adjustment based on the set temperature.
- FOR/REV Button: Press this button to change the direction of the fan blades (forward for cooling, reverse for heat circulation).
- ආලෝක බොත්තම: Press to turn the ceiling fan lights ON or OFF. (Note: This remote does not support dimming.)
- TIMER බොත්තම: Activates the fan timer function. Refer to your fan's specific instructions for timer settings.
- LIGHT DELAY Button: Activates the light delay function. Refer to your fan's specific instructions for light delay settings.
- TEMP UP / TEMP DOWN Buttons: Adjust the desired temperature setting for the thermostatic function.
- Temperature Unit Conversion (C/F): To switch between Celsius and Fahrenheit, hold down the TEMP UP and TEMP DOWN buttons simultaneously for 3 seconds.
නඩත්තු කිරීම
- පිරිසිදු කිරීම: මෘදු වියළි රෙද්දකින් දුරස්ථ පාලකය පිස දමන්න. උල්ෙල්ඛ පිරිසිදු කරන්නන් හෝ ද්රාවක භාවිතා නොකරන්න.
- බැටරි ආදේශනය: Replace batteries when the remote's performance degrades or the display becomes dim. Always use new AAA batteries and dispose of old batteries responsibly.
- ගබඩා: When not in use for extended periods, remove batteries to prevent leakage. Store the remote in a cool, dry place.
Image: The Anderic FAN-9T remote control securely placed in its included wall mount holder.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Remote not responding / Fan not working. |
|
|
| ලයිට් වැඩ කරන්නේ නැහැ. |
|
|
| උෂ්ණත්ව සංදර්ශකය වැරදියි. | Incorrect temperature unit setting. | Hold TEMP UP and TEMP DOWN buttons simultaneously for 3 seconds to switch between Celsius and Fahrenheit. |
පිරිවිතර
| ගුණාංගය | විස්තර |
|---|---|
| නිෂ්පාදන මානයන් | අඟල් 3 x 1 x 6 |
| අයිතමයේ බර | අවුන්ස 4.8 කි |
| ආදර්ශ අංකය | FAN9T |
| අවශ්ය බැටරි | 4 AAA බැටරි |
| වර්ණය | සුදු |
| ගැළපෙන උපාංග | Hampton Bay Ceiling Fans |
| FCC හැඳුනුම්පත | L3HFAN9T |
| PN | FAN9TR |
උපකාරක තොරතුරු
Anderic is committed to providing high-quality replacement remote controls and accessories. For further assistance or inquiries, please refer to the official Anderic webවෙබ් අඩවිය හෝ ඔවුන්ගේ පාරිභෝගික සහාය අමතන්න.
Anderic is a company based in NC, USA, dedicated to ensuring the highest quality standards for their products.
