හැඳින්වීම
The PC101 Water Quality Tester is designed for quick and accurate measurement of pH and Chlorine (CL2) levels in swimming pools, aquariums, and spas. This device provides instant readings, eliminating the need for complex color matching charts. It is an essential tool for maintaining optimal water quality.
Image: The PC101 Water Quality Tester, showing the main handheld unit, the separate probe with two electrodes, and the coiled cable connecting them.
සැලසුම
- බැටරි ස්ථාපනය: The PC101 requires one (1) AA 1.5V Alkaline battery (not included). Open the battery compartment, insert the battery with correct polarity, and close the compartment securely.
- පරීක්ෂණ සම්බන්ධතාවය: Ensure the probe is securely connected to the main unit.
- Initial Adjustment (Chlorine): Before testing chlorine levels, the meter must be adjusted to the "adjustment point." Refer to the operating instructions for detailed steps on this calibration.
මෙහෙයුම් උපදෙස්
General Usage Notes:
- Do not immerse the probe in any liquid other than pool or spa water.
- Always ensure the probe is clean before and after use.
Testing Chlorine (CL2) Level:
- සකස් කිරීම: Ensure the unit is powered on and the probe is clean.
- ගැලපීම: Before each chlorine test, adjust the meter to the "adjustment point" as indicated on the device. This typically involves placing the probe in a known solution or following a specific procedure outlined on the device itself (often a dial or switch).
- ගිල්වීම: Carefully immerse the probe into the water you wish to test (pool, spa, aquarium).
- කියවීම: Wait for the reading to stabilize on the large screen. The safe measure range for Chlorine Level is 1.2 to 1.7 ppm.
Testing pH Level:
- සකස් කිරීම: Ensure the unit is powered on and the probe is clean.
- ගිල්වීම: Carefully immerse the probe into the water you wish to test.
- කියවීම: Wait for the reading to stabilize on the large screen. The safe measure range for pH Level is 7.2 to 7.8.
රූපය: සමීප ඡායාරූපයක් view of the PC101 tester's display, showing the analog scales for pH and Chlorine levels with color-coded indicators for ideal ranges.
නඩත්තු කිරීම
- පරීක්ෂණය පිරිසිදු කිරීම: After each use, gently rinse the probe with clean water and wipe it dry with a soft cloth. Do not use abrasive materials or harsh chemicals.
- ගබඩා: Store the PC101 tester in a dry, cool place, away from direct sunlight and extreme temperatures. Ensure the probe is protected from damage.
- බැටරි ආදේශනය: If the display becomes dim or readings are inconsistent, replace the AA 1.5V battery.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| සංදර්ශකයක් නැත හෝ අඳුරු සංදර්ශකයක් නැත | අඩු හෝ මිය ගිය බැටරි | Replace the 1.5V AA battery. |
| Inaccurate Chlorine readings | Meter not adjusted to "adjustment point" before testing | Ensure the meter is adjusted correctly before each chlorine test. |
| නොගැලපෙන කියවීම් | Dirty probe electrodes; Battery low | Clean the probe electrodes thoroughly; Replace battery. |
| පරීක්ෂණ හානිය | Physical damage or immersion in non-pool/spa liquids | Avoid immersing the probe in liquids other than pool/spa water. Handle with care. Replacement probe may be required. |
පිරිවිතර
- ආකෘතිය: PC101
- Chlorine Level Safety Range: 1.2 සිට 1.7 දක්වා ppm
- pH Level Safety Range: 7.2 සිට 7.8 දක්වා
- බල සැපයුම: 1 x AA 1.5V Alkaline Battery (not included)
- ප්රධාන ඒකක මානයන්: ආසන්න වශයෙන් 190 x 120 මි.මී
- Probe with Handle Length: 150 මි.මී
- Probe (electrode part only) Length: 48 mm (excluding black band)
- කේබල් දිග: 130 මි.මී
- සංදර්ශක විශේෂාංග: රැහැන් රහිත
වගකීම් සහ සහාය
No specific warranty or support information is provided with this product. For any issues, please refer to the troubleshooting section or contact your retailer.
