Xanlite APS300 Solar LED Wall Light with Motion Detector

1. නිෂ්පාදන අවසන්view

The Xanlite APS300 is a solar-powered LED wall light designed for outdoor use. It features an integrated motion detector and a dusk-to-dawn sensor, providing automatic illumination when movement is detected in low-light conditions. This light is energy-efficient, utilizing solar energy for charging, and boasts an IP44 rating for weather resistance.

• සූර්ය බලශක්තිය: Charges during the day using sunlight, eliminating the need for electrical wiring.
• චලන සංවේදකය: Automatically activates the light when motion is detected.
• සන්ධ්‍යාවේ සිට අලුයම දක්වා සංවේදකය: Ensures the light only operates when ambient light is low.
• IP44 කාලගුණ ප්‍රතිරෝධය: Protected against solid objects larger than 1mm and splashing water from any direction.
• ආලෝක ප්රතිදානය: Provides 300 lumens of cool white light (6000K).

රූපය 1.1: ඉදිරිපස view of the Xanlite APS300 Solar LED Wall Light, showing the LED array and motion sensor.

2. ආරක්ෂිත උපදෙස්

Please read and understand all safety instructions before installing or using the product. Keep this manual for future reference.

• Do not immerse the solar product in water.
• Ensure the solar panel is clean and unobstructed for optimal charging. Clean with a damp අවශ්ය නම් රෙදි.
• Do not attempt to open or modify the product. There are no user-serviceable parts inside.
• නිෂ්පාදිතය විවෘත ගිනිදැල්වලින් හෝ අධික තාප ප්‍රභවයන්ගෙන් ඈත් කර තබන්න.
• දේශීය රෙගුලාසිවලට අනුව නිෂ්පාදනය සහ එහි බැටරිය වගකීමෙන් යුතුව බැහැර කරන්න.

3. පැකේජ අන්තර්ගතය

සියලුම සංරචක පැකේජයේ ඇති බව තහවුරු කර ගන්න:

• 1 x Xanlite APS300 Solar LED Wall Light
• සවි කිරීමේ දෘඩාංග (ඉස්කුරුප්පු, බිත්ති ප්ලග්) - (Typically included, though not explicitly listed as separate item in source data)
• පරිශීලක අත්පොත

4. සැකසුම සහ ස්ථාපනය

Follow these steps for proper installation of your solar LED wall light:

1. ප්‍රශස්ත ස්ථානයක් තෝරන්න: Select a mounting location that receives direct sunlight for at least 6-8 hours daily. This ensures the solar panel can fully charge the internal battery. Avoid areas under eaves, trees, or other obstructions that might block sunlight.
2. සවි කිරීම සඳහා සූදානම් වන්න: The light is designed for wall mounting. You will need to drill three holes for the mounting plate. Use a pencil to mark the desired positions on the wall.
3. සිදුරු සිදුරු: Using an appropriate drill bit for your wall material, drill the marked holes. Insert wall plugs if necessary.
4. සවිකරන තහඩුව අමුණන්න: සපයා ඇති ඉස්කුරුප්පු භාවිතයෙන් බිත්තියට සවි කරන තහඩුව සුරක්ෂිත කරන්න.
5. ආලෝකය සවි කරන්න: Slide the Xanlite APS300 light onto the secured mounting plate until it clicks into place. Ensure it is firmly attached.
6. ආලෝකය සක්රිය කරන්න: Locate the ON/OFF switch, usually on the back or bottom of the unit. Ensure it is set to the "ON" position. The battery will not charge if the switch is in the "OFF" position.

Image 4.1: Illustration of the solar light charging during the day and automatically illuminating at night.

5. මෙහෙයුම් උපදෙස්

The Xanlite APS300 operates automatically once installed and activated:

• ස්වයංක්‍රීය ආරෝපණය: During daylight hours, the integrated solar panel converts sunlight into electricity, charging the internal rechargeable battery.
• සවස සිට අලුයම දක්වා මෙහෙයුම: The light features a built-in light sensor (crépusculaire detector) that detects ambient light levels. It will automatically enter standby mode at dusk when light levels are low.
• චලන හඳුනාගැනීම: While in standby mode at night, the motion sensor will detect movement within its range. Upon detection, the light will illuminate at full brightness (300 lumens) for approximately 25 seconds before returning to standby mode if no further motion is detected.

වැදගත් සටහන:

• Ensure the ON/OFF switch is always in the "ON" position for the light to charge and operate.
• The light will not turn on during daylight hours, even if motion is detected, to conserve energy.

Image 5.1: The light automatically illuminates when motion is detected.

6. නඩත්තු කිරීම

To ensure optimal performance and longevity of your Xanlite APS300, follow these maintenance guidelines:

• සූර්ය පැනලය පිරිසිදු කරන්න: නිතිපතා සූර්ය පැනලය මෘදු, d රෙදි කඩකින් පිස දමන්න.amp දූවිලි, කුණු, කොළ හෝ හිම ඉවත් කිරීමට රෙදි. පිරිසිදු පැනලයක් කාර්යක්ෂම ආරෝපණය සහතික කරයි.
• හානිය සඳහා පරීක්ෂා කරන්න: Periodically check the light for any signs of physical damage or wear.
• සැර රසායනික ද්‍රව්‍යවලින් වළකින්න: Do not use abrasive cleaners or solvents on the light, as they may damage the finish or components.

Image 6.1: The light is designed to withstand rain and garden watering (IP44 protection).

Image 6.2: The light is resistant to cold temperatures and snow.

7. දෝශ නිරාකරණය

If you encounter issues with your Xanlite APS300, refer to the table below for common problems and solutions:

8. පිරිවිතර

Detailed technical specifications for the Xanlite APS300 Solar LED Wall Light:

Image 8.1: Dimensional diagram of the light (193mm width, 65mm height).

9. වගකීම් සහ සහාය

වගකීම් තොරතුරු:

This Xanlite APS300 product comes with a වසර 2ක වගකීමක් from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

පාරිභෝගික සහාය:

For technical assistance, warranty claims, or any questions regarding your Xanlite APS300, please contact Xanlite customer service. Refer to the official Xanlite webනිශ්චිත සම්බන්ධතා තොරතුරු සඳහා වෙබ් අඩවිය හෝ ඔබේ මිලදී ගැනීමේ ලියකියවිලි.

This product is recyclable. Please dispose of it at designated collection points (e.g., Recyclum in France) to support environmental protection.