හැඳින්වීම
This manual provides instructions for the installation, operation, and maintenance of the Black Box SERVSWITCH EC USB Server Cable, Model EHN9000U-0006. This 6-foot (1.8-meter) cable is designed to connect a server to a KVM switch, providing both USB and VGA connectivity.
ආරක්ෂිත තොරතුරු
Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in damage to the product or connected equipment.
- Do not expose the cable to excessive moisture or extreme temperatures.
- අභ්යන්තර වයර් වලට හානි විය හැකි බැවින්, කේබලය තියුණු ලෙස නැමීමෙන් හෝ ඇඹරීමෙන් වළකින්න.
- Ensure all connections are secure before powering on equipment.
- Disconnect power from devices before connecting or disconnecting cables.
පැකේජයේ අන්තර්ගතය
ඔබගේ පැකේජයේ පහත අයිතමය අඩංගු දැයි තහවුරු කරගන්න:
- 1 x Black Box SERVSWITCH EC USB Server Cable (EHN9000U-0006)
නිෂ්පාදනය අවසන්view
The Black Box SERVSWITCH EC USB Server Cable is a specialized cable designed for KVM (Keyboard, Video, Mouse) applications. It integrates VGA video and USB keyboard/mouse signals into a single cable for streamlined connectivity between a server and a KVM switch.
රූපය: Black Box SERVSWITCH EC USB Server Cable. This image displays the 6-foot cable with its distinct VGA (HD-15) and USB connectors, designed for server-to-KVM switch connections.
ප්රධාන ලක්ෂණ:
- ඒකාබද්ධ සම්බන්ධතාවය: Combines VGA video and USB data into one cable.
- දිග: 6 feet (1.8 meters) for flexible placement.
- ගැළපුම: Designed for use with Black Box SERVSWITCH KVM systems.
- පටලැවිලි රහිත නිර්මාණය: Helps prevent tangles and simplifies cable management.
සැලසුම
- බල අක්රිය උපාංග: Ensure both the server and the KVM switch are powered off before making any connections.
- Connect to Server: Locate the VGA output port and an available USB port on your server. Connect the corresponding VGA (HD-15 male) and USB (Type-A male) connectors of the EHN9000U-0006 cable to these ports on the server.
- Connect to KVM Switch: Locate the KVM port on your KVM switch designated for the server. Connect the combined VGA (HD-15 female) and USB (Type-A female) end of the EHN9000U-0006 cable to the KVM switch's input port. Ensure a secure fit for both connectors.
- බල ගැන්වීම: Once all connections are secure, power on the KVM switch, then power on the server.
ක්රියාත්මක වෙනවා
Once the cable is properly connected and devices are powered on, the KVM switch should detect the connected server. Use the KVM switch's controls (buttons, hotkeys, or OSD) to switch to the server connected via this cable. You should then have control over the server's video, keyboard, and mouse.
- Refer to your KVM switch's user manual for specific instructions on switching between connected servers.
- Ensure the KVM switch is configured to recognize the USB keyboard and mouse signals.
නඩත්තු කිරීම
The Black Box SERVSWITCH EC USB Server Cable requires minimal maintenance. Follow these guidelines to ensure longevity:
- පිරිසිදු කිරීම: Use a soft, dry cloth to wipe the cable and connectors. Do not use liquid cleaners or solvents.
- ගබඩා: When not in use, store the cable in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tight coiling to prevent internal damage.
- හැසිරවීම: Always grasp the connector housing when plugging or unplugging the cable. Avoid pulling on the cable itself.
දෝෂගවේෂණය
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| වීඩියෝ සංදර්ශකයක් නොමැත | Loose VGA connection; Incorrect KVM port selected; Server video output issue. | Ensure VGA connectors are fully seated and secured. Select the correct KVM port. Check server's video output directly. |
| යතුරුපුවරුව/මූසිකය ප්රතිචාර නොදක්වයි | Loose USB connection; KVM switch USB emulation issue; Server USB port issue. | Ensure USB connectors are fully seated. Verify KVM switch USB settings. Test server USB ports with another device. |
| අතරමැදි සම්බන්ධතාවය | Damaged cable; Loose connections; Electrical interference. | Inspect cable for visible damage. Re-seat all connections. Ensure cable is not near strong electromagnetic sources. |
පිරිවිතර
- ආකෘතිය: EHN9000U-0006
- වෙළඳ නාමය: කළු පෙට්ටිය
- කේබල් වර්ගය: USB, VGA
- Connector Type (Server End): HD-15 Male (VGA), USB Type-A Male
- Connector Type (KVM End): HD-15 Female (VGA), USB Type-A Female
- දිග: අඩි 6 (මීටර් 1.8)
- වර්ණය: කළු/රතු
- විශේෂ ලක්ෂණය: පටලැවීම නිදහස්
- ගැළපෙන උපාංග: Server (with VGA and USB ports)
- නිෂ්පාදන මානයන්: 5 x 0.5 x 5 අඟල් (ආසන්න ඇසුරුම් මානයන්)
- අයිතමයේ බර: අවුන්ස 8.4 (කිලෝග්රෑම් 0.24)
- UPC: 822088018322
වගකීම් සහ සහාය
For warranty information and technical support, please refer to the official Black Box webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුවට සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.
කළු පෙට්ටිය Webඅඩවිය: www.blackbox.com
