1. හැඳින්වීම
This manual provides essential information for the proper installation, operation, and maintenance of your Genius 6100334 Echo TX4 2-Channel 433 MHz Transmitter. Please read these instructions carefully before using the device to ensure safe and efficient operation.
The Genius Echo TX4 is a 4-channel rolling code transmitter designed for secure operation, protecting against unauthorized copying. It features a comfortable, ergonomic design with intuitive buttons and a highly visible red signal LED. It operates at a frequency of 433 MHz and is powered by a 12V battery. This product includes all necessary safety certificates and instruction manuals for use and maintenance.
2. නිෂ්පාදන අවසන්view
The Genius Echo TX4 is a compact and reliable remote control for various applications, primarily garage door and gate openers. Its rolling code technology enhances security by changing the transmission code with each use.
ප්රධාන ලක්ෂණ:
- 4-Channel Operation: Allows control of up to four different devices or functions.
- Rolling Code (RC) Technology: Provides enhanced security against code duplication.
- මෙහෙයුම් සංඛ්යාතය: 433 MHz
- Ergonomic Design: රඳවා තබා ගැනීමට සහ භාවිතා කිරීමට පහසුය.
- දෘශ්ය ප්රතිපෝෂණය: Highly visible red signal LED indicates transmission.
- බලශක්ති ප්රභවය: 12V බැටරි.
නිෂ්පාදන සංරචක:
රූපය 1: ඉදිරිපස view of the Genius Echo TX4 transmitter. This image displays the four oval control buttons and the red signal LED at the top right. The "GENIUS" logo is visible at the bottom left.
රූපය 2: ආපසු view of the Genius Echo TX4 transmitter. This image shows the label with product information including "6100334 (ECHO TX4 RC)", "433 MHz", "Made in Bulgaria", and "Designed in Italy", along with manufacturer details.
3. සැකසුම සහ ක්රමලේඛනය
The programming procedure for the Genius Echo TX4 transmitter typically involves interaction with the receiver unit of your gate or garage door opener. The specific steps can vary depending on the model of your receiver.
සාමාන්ය ක්රමලේඛන මාර්ගෝපදේශ:
- Consult Receiver Manual: Always refer to the instruction manual of your specific gate or garage door receiver for detailed programming steps. The programming type is typically "Refer to the receiver."
- ප්රවේශ ග්රාහකයා: You will usually need to access the receiver unit, which is often located within the motor housing of your gate or garage door system.
- ඉගෙනුම් මාදිලිය ආරම්භ කරන්න: Most receivers have a "Learn" or "Program" button. Pressing this button for a short duration (as specified in your receiver's manual) will put the receiver into learning mode.
- Transmit Code: While the receiver is in learning mode, press the desired button on your new Genius Echo TX4 transmitter. The receiver's LED indicator will typically flash or change color to confirm successful programming.
- පරීක්ෂණ මෙහෙයුම: After programming, test the transmitter to ensure it operates the gate or garage door correctly.
වැදගත් සටහන: For installations in apartments or shared access systems, the control unit may be locked by the original installer. In such cases, only the installer has the necessary code to program new remotes. If you are unable to program the remote, it is likely due to this lock, and the remote is not defective. Please contact the original installer for assistance.
බැටරි ස්ථාපනය:
The Genius Echo TX4 uses a 12V battery. To install or replace the battery:
- සම්ප්රේෂකය ප්රවේශමෙන් විවෘත කරන්න casing.
- නිවැරදි ධ්රැවීයතාව (+/-) සහතික කරමින් 12V බැටරිය ඇතුළු කරන්න.
- c වසා දමන්නasing ආරක්ෂිතව.
4. මෙහෙයුම් උපදෙස්
Operating the Genius Echo TX4 transmitter is straightforward:
- නාලිකාව තෝරන්න: Identify the button on your transmitter that has been programmed to control your specific device (e.g., gate, garage door).
- බොත්තම ඔබන්න: Press and hold the desired button briefly.
- Observe LED: The red signal LED on the transmitter will illuminate during transmission, indicating that a signal is being sent.
- මුදා හැරීමේ බොත්තම: Release the button once the device begins to respond.
The rolling code system ensures that a different code is transmitted each time the button is pressed, enhancing security.
5. නඩත්තු කිරීම
The Genius Echo TX4 transmitter requires minimal maintenance to ensure long-term performance.
බැටරි ආදේශනය:
When the red signal LED becomes dim or the transmitter's range decreases, it is likely time to replace the 12V battery. Follow the battery installation steps outlined in Section 3.
පිරිසිදු කිරීම:
Clean the transmitter with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the casing හෝ අභ්යන්තර සංරචක.
ගබඩා:
Store the transmitter in a dry place, away from extreme temperatures and direct sunlight, when not in use for extended periods.
6. දෝශ නිරාකරණය
If your Genius Echo TX4 transmitter is not functioning as expected, consider the following troubleshooting steps:
- සම්ප්රේෂකය ප්රතිචාර නොදක්වයි:
- Check the battery. A weak or dead 12V battery is a common cause of malfunction. Replace if necessary.
- ඔබ ග්රාහකයාගේ මෙහෙයුම් පරාසය තුළ සිටින බවට වග බලා ගන්න.
- Verify that the correct button is being pressed for the intended device.
- ක්රමලේඛන ගැටළු:
- Re-read the programming instructions for your receiver unit carefully.
- Confirm that the receiver is in learning mode during the programming attempt.
- Installer Lock: As mentioned in Section 3, if the system is part of an apartment or shared access installation, the receiver might be locked by the original installer. In this scenario, the remote is not faulty, and you must contact the installer for programming assistance.
- බාධා කිරීම්:
- Radio frequency interference from other devices can sometimes affect performance. Try operating the transmitter from a different location.
If problems persist after following these steps, contact a qualified technician or the product manufacturer for further assistance.
7. පිරිවිතර
| වෙළඳ නාමය | දක්ෂයි |
| ආකෘතිය | ECHO TX4 |
| කොටස අංකය | 6100334 Echo TX4 |
| මෙහෙයුම් සංඛ්යාතය | 433 MHz |
| නාලිකා ගණන | 4 |
| කේතීකරණ වර්ගය | Rolling Code (RC) |
| බල සැපයුම | 12V බැටරි |
| මානයන් (L x W x H) | 9.5 x 6.2 x 2.2 සෙ.මී |
| බර | 38 ග්රෑම් |
| විශේෂ ලක්ෂණ | Ergonomic නිර්මාණය |
| ගැළපෙන ග්රාහකයින් | 6100238, 6100237, 6100145, 6100323 |
| ගැළපෙන උපාංග | ADYX TE4433H Blau, Adyx Te4433H, genius 4433H, genius Te4433H Blau, powerdoor te4433h blau |
8. වගකීම් සහ සහාය
Specific warranty terms and conditions for the Genius 6100334 Echo TX4 transmitter are typically provided by the retailer at the time of purchase or by the manufacturer. Please retain your proof of purchase for warranty claims.
For technical support, programming assistance beyond the scope of this manual, or warranty inquiries, please contact your authorized Genius dealer or the manufacturer's customer service department. Contact information can usually be found on the product packaging or the manufacturer's official webඅඩවිය.
