SEBSON Motion Detector and Chime Instruction Manual

1. හැඳින්වීම

This manual provides essential information for the proper installation, operation, and maintenance of your SEBSON Motion Detector and Chime. Please read these instructions carefully before using the device to ensure safe and efficient performance. This device is designed to detect movement and provide an audible alert, functioning as both a motion alarm and a passage chime.

2 ආරක්ෂිත තොරතුරු

• Ensure the device is installed in a dry environment, as it has an IP20 protection rating, meaning it is not protected against water.
• උපාංගය අධික උෂ්ණත්වයට හෝ සෘජු හිරු එළියට නිරාවරණය නොකරන්න.
• දරුවන්ට ළඟා විය නොහැකි ලෙස තබා ගන්න.
• Only use the specified 9V E-Block battery type.
• දේශීය රෙගුලාසි වලට අනුව වගකීමෙන් යුතුව බැටරි බැහැර කරන්න.

3. පැකේජ අන්තර්ගතය

• 1 x SEBSON Motion Detector and Chime (Model BWM_ALARM_B)
• සවිකරන වරහන
• සවි කිරීමේ දෘඩාංග (ඉස්කුරුප්පු, බිත්ති ප්ලග්)
• Note: 1x 9V E-Block battery is required and not included.

4. නිෂ්පාදන අවසන්view

The SEBSON Motion Detector and Chime is a compact, battery-powered device designed for versatile use. It features a passive infrared (PIR) sensor to detect movement and offers two distinct audible alert modes: a chime for passage detection and an alarm for security purposes.

රූපය 1: ඉදිරිපස view of the SEBSON Motion Detector and Chime.

රූපය 2: ඉදිරිපස view of the device, highlighting the SEBSON brand logo.

රූපය 3: පසුපස view of the motion detector, illustrating the integrated mounting bracket.

5. පිහිටුවීම

5.1 බැටරි ස්ථාපනය

1. Gently slide open the battery compartment cover located on the back of the device.
2. Insert one 9V E-Block battery, ensuring correct polarity (+/-).
3. බැටරි මැදිරි කවරය ආරක්ෂිතව වසා දමන්න.

5.2 උපාංගය සවි කිරීම

The device can be mounted on a wall using the provided bracket and hardware.

1. Choose a suitable location for installation. Consider the desired detection area and ensure the sensor has an unobstructed view.
2. Detach the mounting bracket from the main unit if it is not already separate.
3. Mark the positions for drilling holes on the wall using the bracket as a template.
4. සිදුරු සිදුරු කර බිත්ති ප්ලග් ඇතුල් කරන්න.
5. සපයා ඇති ඉස්කුරුප්පු භාවිතයෙන් බිත්තියට සවි කරන වරහන සුරක්ෂිත කරන්න.
6. Attach the motion detector unit to the mounted bracket. The sensor housing can pivot 360 degrees within the bracket to adjust the detection angle.

Figure 4: Illustration of battery insertion and how the device attaches to the wall-mounted bracket.

6. මෙහෙයුම් උපදෙස්

6.1 මාදිලිය තේරීම

The device features a three-position switch for selecting the operating mode:

• CHIME: In this mode, the device emits a short chime sound when motion is detected. This is suitable for use as a passage detector in shops or offices.
• අක්‍රියයි: The device is turned off and will not detect motion or emit any sound.
• අනතුරු ඇඟවීම: In this mode, the device emits a loud alarm sound (approximately 70dB) when motion is detected. This is suitable for security purposes.

රූපය 5: සවිස්තරාත්මක view of the mode selection switch (1: Chime, 2: Off, 3: Alarm).

6.2 හඳුනාගැනීමේ ප්‍රදේශය

The motion detector has a detection range of up to 8 meters and a detection angle of 60 degrees. For optimal performance, position the device to cover the desired area without obstructions.

Figure 6: Diagram showing the detection range (8m) and angle (60°), along with the 360° rotational capability of the sensor head.

7. නඩත්තු කිරීම

7.1 බැටරි ප්රතිස්ථාපනය

When the sound becomes weak or the device stops responding, it is time to replace the 9V E-Block battery. Follow the battery installation steps in Section 5.1.

7.2 පිරිසිදු කිරීම

To clean the device, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the surface or internal components. Ensure no moisture enters the device.

8. දෝශ නිරාකරණය

• Device not detecting motion:
  • Check if the battery is correctly installed and has sufficient power. Replace if necessary.
  • Ensure the device is not in the "OFF" position.
  • Verify that the detection area is clear of obstructions.
  • Adjust the angle of the sensor to cover the desired area.
• No sound or weak sound:
  • 9V බැටරිය ප්රතිස්ථාපනය කරන්න.
  • Ensure the device is not in the "OFF" position.
• වැරදි අනතුරු ඇඟවීම්:
  • Reposition the device to avoid areas with rapid temperature changes (e.g., near heaters, air conditioners) or moving objects (e.g., curtains near a window).
  • Ensure the detection area is free from small animals if not intended to detect them.

9. පිරිවිතර

10. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official SEBSON webවෙබ් අඩවිය. ඕනෑම වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.