Amazon Basics Mid-Back Office Computer Task Desk Chair (Model GF-9390M-1) Instruction Manual

හැඳින්වීම

This manual provides essential instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Computer Task Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

ආරක්ෂිත තොරතුරු

අවවාදයයි:

• Always follow the assembly instructions provided in this user manual to ensure safe use.
• උපරිම බර ධාරිතාව රාත්තල් 275 (කිලෝග්‍රෑම් 124.74) නොඉක්මවන්න.
• Be cautious of the swivel feature to prevent tripping.
• Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners.

පැකේජයේ අන්තර්ගතය

එකලස් කිරීම ආරම්භ කිරීමට පෙර සියලුම සංරචක පවතින බව තහවුරු කර ගන්න:

• ආසන කුෂන්
• පිටුපස කුෂන්
• Gas Lift (Cylinder)
• Hardware (Screws, Hex Tool)
• පාදය (5-ලක්ෂ්‍ය තරු පාදය)
• අත්වාරු (2)
• කැස්ටර් (5)
• Mechanism (for seat height and tilt)

සැකසීම සහ එකලස් කිරීම

Follow these steps to assemble your office chair. An assembly video is provided for visual guidance.

1. Insert Casters: Firmly press each of the five casters (wheels) into the holes at the end of each leg of the 5-point star base. Ensure they are securely seated.
2. සිලින්ඩරය ඇතුළු කරන්න: Place the gas lift cylinder into the center hole of the assembled base. Ensure the narrower end of the cylinder points upwards.
3. ආසනයට යාන්ත්‍රණය අමුණන්න: Align the seat mechanism with the pre-drilled holes on the underside of the seat cushion. Use the provided screws (typically 'A' type) and the hex tool to attach it. Do not fully tighten yet.
4. Place Seat on Cylinder: Carefully place the assembled seat (with mechanism attached) onto the gas lift cylinder. The cylinder should fit snugly into the mechanism's central opening.
5. අත්වැසුම් අමුණන්න: Position the armrests on either side of the seat, aligning them with the pre-drilled holes on both the seat and the backrest. Use the appropriate screws (typically 'B' type) to attach them. Do not fully tighten these screws at this stage.
6. Backrest අමුණන්න: Align the backrest with the armrests and the seat. Use the remaining screws (typically 'C' type) to secure the backrest to the armrests.
7. සියලුම ඉස්කුරුප්පු තද කරන්න: Once all components are loosely assembled, fully tighten all screws using the hex tool. Ensure all connections are firm and secure.
8. Place Screw Caps: Cover any visible screw heads with the provided plastic caps for a finished appearance.

මෙහෙයුම් උපදෙස්

Your Amazon Basics office chair offers several adjustable features for personalized comfort:

• ආසන උස ගැලපීම: To raise the seat, lift the lever located under the seat while taking your weight off the chair. To lower the seat, lift the lever while remaining seated. Release the lever at the desired height.
• ඇලවීමේ කාර්යය: The chair features a tilt mechanism. To enable tilting, pull the lever outwards. To lock the chair in an upright position, push the lever inwards.
• ඇලවීමේ ආතතිය ගැලපීම: Rotate the round knob located under the seat (usually at the front of the mechanism) to adjust the tension of the tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• අංශක 360 කැරකීම: The chair is designed with a 360-degree swivel for easy movement and multi-tasking.
• Rolling Casters: The five-point base with casters allows for smooth-rolling mobility across various floor surfaces.

නඩත්තු කිරීම

To maintain the appearance and longevity of your chair:

• පිරිසිදු කිරීම: දැන්වීම සමඟ පිස දමන්නamp රෙදි. කෘතිම සම් වලට හානි කළ හැකි රළු රසායනික ද්‍රව්‍ය හෝ උල්ෙල්ඛ පිරිසිදු කරන්නන්ගෙන් වළකින්න.
• ගාංචු: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to prevent wobbling or instability.
• වාත්තුකරුවන්: සුමට රෝල් කිරීම සහතික කිරීම සඳහා වාත්තු යන්ත්‍ර සුන්බුන් (කෙස්, දූවිලි ආදිය) වලින් තොරව තබා ගන්න.

දෝෂගවේෂණය

If you encounter issues with your chair, consider the following:

• පුටුව අස්ථායී හෝ සෙලවෙන බවක් දැනේ: Ensure all assembly screws are fully tightened. Check the gas lift cylinder for proper seating in the base and mechanism.
• Difficulty leaning back or adjusting tilt: Check the tilt tension knob under the seat. Rotate it counter-clockwise to loosen the tension. Ensure the tilt lock lever is disengaged (pulled outwards).
• Screws not fitting or stripping: Ensure you are using the correct screws for each step as indicated in the assembly instructions. Do not overtighten screws during initial assembly; tighten fully only after all components are loosely fitted. If a screw is stripped, contact customer support for replacement parts.
• සුමටව පෙරළෙන්නේ නැති වාත්තු යන්ත්‍ර: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.

පිරිවිතර

වගකීම් සහ සහාය

For warranty information or technical support, please refer to the product packaging or contact Amazon Basics customer service directly. Keep your purchase receipt for any warranty claims.