Simpeak S10

Simpeak S10 Protective Case for Anker SoundCore Mini/Mini 3 Bluetooth Speaker

පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides comprehensive instructions for the Simpeak S10 Protective Case, designed to safeguard your Anker SoundCore Mini or SoundCore Mini 3 Bluetooth portable speaker. Please read this manual thoroughly to ensure proper use and care of your protective case.

Simpeak S10 protective case, black, closed with zipper and carabiner

Figure 1.1: The Simpeak S10 protective case in black, featuring a durable zipper and an attached carabiner for portability.

2. නිෂ්පාදන ලක්ෂණ

Simpeak S10 case with speaker inside, highlighting EVA material

Figure 2.1: The interior of the Simpeak S10 case with a speaker, illustrating the protective EVA material.

3. පිහිටුවීම

The Simpeak S10 Protective Case requires minimal setup. Follow these steps to prepare your case for use:

  1. නඩුව ඉවත් කරන්න: Carefully remove the protective case from its packaging.
  2. හානිය සඳහා පරීක්ෂා කරන්න: Before first use, inspect the case for any signs of damage during transit.
  3. Prepare Speaker: Ensure your Anker SoundCore Mini or Mini 3 speaker is clean and free of debris before placing it into the case.

4. මෙහෙයුම් උපදෙස්

Using the Simpeak S10 Protective Case is straightforward:

  1. නඩුව විවෘත කරන්න: Unzip the case completely to reveal the interior.
  2. කථිකයා ඇතුළු කරන්න: Gently place your Anker SoundCore Mini or Mini 3 speaker into the main compartment of the case. Ensure it fits snugly.
  3. ගබඩා උපාංග: Use the mesh pocket in the lid to store small accessories such as charging cables or USB adapters.
  4. නඩුව වසන්න: Zip the case securely to protect your speaker from impacts, dust, and scratches.
  5. Attach Carabiner (Optional): If desired, attach the included carabiner to the case's loop and then to a backpack, belt loop, or other suitable attachment point for convenient carrying.
Simpeak S10 case open with speaker compartment and mesh pocket

Figure 4.1: The Simpeak S10 case opened, showing the main compartment for the speaker and the mesh pocket for accessories.

Simpeak S10 case attached to a bicycle handlebar with carabiner

Figure 4.2: The Simpeak S10 case attached to a bicycle handlebar using the carabiner for outdoor use.

5. නඩත්තු කිරීම

Proper maintenance will extend the life of your Simpeak S10 Protective Case:

6. දෝශ නිරාකරණය

This section addresses common issues you might encounter with your protective case.

ගැටලුවවිය හැකි හේතුවවිසඳුම
Speaker does not fitIncorrect speaker model.Ensure your speaker is an Anker SoundCore Mini or SoundCore Mini 3. This case is specifically designed for these models.
Zipper is stiff or stuckසිපර් දත්වල අපිරිසිදු හෝ සුන්බුන්; ලිහිසිකරණය නොමැතිකම.Clean the zipper teeth with a small brush. Apply a small amount of zipper lubricant or wax.
Case appears damagedImpact during use or manufacturing defect.If the damage affects protection, consider replacing the case. Contact Simpeak customer support if it's a manufacturing defect.

7. පිරිවිතර

විශේෂාංගයවිස්තර
වෙළඳ නාමයසිම්පීක්
ආදර්ශ අංකයS10
ගැළපෙන උපාංගAnker SoundCore Mini, Anker SoundCore Mini 3
ද්රව්යEVA (Ethylene-vinyl acetate)
වර්ණයකළු
විශේෂ ලක්ෂණIntegrated accessory compartment, carabiner for portability
මානයන් (නඩු)Approximately 91mm (height) x 80mm (diameter)
Simpeak S10 case and Anker SoundCore Mini speaker with dimensions

Figure 7.1: Dimensions of the Simpeak S10 case and a compatible Anker SoundCore Mini speaker.

8. වගකීම් සහ සහාය

Simpeak products are designed for durability and performance. For warranty information or technical support, please refer to the official Simpeak webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවය කෙලින්ම අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

වැඩිදුර සහාය සඳහා, ඔබට පිවිසිය හැක්කේ Amazon හි නිෂ්පාදන පිටුව.