amazon basics 12V 150 PSI Digital Tyre Inflator User Manual

හැඳින්වීම

Thank you for choosing the amazon basics Compact Portable 12V 150 PSI Digital Tyre Inflator. This manual provides essential information for the safe and efficient operation of your new device. Please read it thoroughly before use and retain it for future reference.

This compact and portable tyre inflator is designed for convenient inflation of vehicle tyres (cars, motorcycles, scooters) and other inflatable items. It features a digital gauge for precise pressure settings, an auto-shutoff function, and a built-in LED light for visibility in low-light conditions.

ආරක්ෂිත තොරතුරු

තුවාල හෝ හානි වැළැක්වීම සඳහා සෑම විටම පහත ආරක්ෂක මාර්ගෝපදේශ පිළිපදින්න:

• පුපුරා යාමේ අවදානම: Do not adjust the regulator to result in an output pressure greater than the marked maximum pressure of the attachment.
• තුවාල වීමේ අවදානම: Do not direct the air stream at your body or other individuals.
• පාරිසරික නිරාවරණය: Do not expose the device to rain. Store indoors in a dry place.
• මෝටර් රථ බැටරිය බැස යාම වළක්වා ගැනීම සඳහා ඉන්ෆ්ලේටරය භාවිතා කරන විට වාහන එන්ජිම ක්‍රියාත්මක වන බවට වග බලා ගන්න.
• Do not operate the inflator for more than 10 minutes continuously. Allow a 10-minute cool-down period after each operation.

පැකේජයේ අන්තර්ගතය

ඇසුරුම් ඉවත් කිරීමෙන් පසු, පහත සඳහන් සියලුම අයිතම එහි ඇති බවට වග බලා ගන්න:

• 1 x amazon basics Digital Tyre Inflator (Model AC010225C)
• 1 x පරිශීලක අත්පොත
• 1 x රැගෙන යන නඩුව
• 1 x 12V Cigarette Lighter Power Cord (integrated)
• 1 x Air Hose (integrated)
• 2 x Inflation Attachments (for balls, balloons, etc.)
• 1 x අමතර ෆියුස්
• 2 x Warning Cards

Image: The amazon basics Digital Tyre Inflator neatly stored within its carrying case.

නිෂ්පාදන විශේෂාංග

• Compact 12-volt portable tyre inflator.
• Plugs into a standard 12V cigarette lighter port.
• Maximum pressure rating of 150 PSI.
• Airflow capacity: 22 L/M (liters per minute) at 0 PSI.
• 10-foot power cord for extended reach.
• 23.6-inch air hose for easy connection to tyres.
• Digital gauge with auto-shutoff capability for precise inflation.
• Built-in LED light for illumination in dark environments.

රූපය: සමීප ඡායාරූපයක් view of the digital display, 'SET' button, arrow buttons, and 'OFF/COMPRESSOR ON' and 'FLASH OFF/LIGHT' buttons.

සැලසුම

1. පුම්බන යන්ත්‍රය ඉවත් කරන්න: Remove the tyre inflator and its accessories from the carrying case.
2. Locate Power Cord and Air Hose: The power cord and air hose are stored within compartments on the device. Gently pull them out.
3. බලයට සම්බන්ධ කරන්න: Insert the 12V cigarette lighter plug into your vehicle's 12V accessory socket. Ensure the vehicle's engine is running to provide adequate power and prevent battery drain.
4. Attach Air Hose to Tyre: Screw the air hose connector onto the tyre valve stem until it is securely fastened. For other inflatables, use the appropriate inflation attachment.

Image: The rear of the inflator, illustrating the integrated storage for the air hose and the 12V power cord.

මෙහෙයුම් උපදෙස්

1. බල ගැන්වීම: Once connected to the 12V power source, the digital display will illuminate, showing the current tyre pressure.
2. අපේක්ෂිත පීඩනය සකසන්න: Press the 'SET' button to cycle through pressure units (PSI, BAR, KPA). Use the '+' and '-' buttons to adjust the target pressure.
3. උද්ධමනය ආරම්භ කරන්න: Press the 'COMPRESSOR ON' button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
4. උද්ධමනය නිරීක්ෂණය කරන්න: Keep an eye on the digital display during inflation.
5. LED ආලෝකය භාවිතා කිරීම: Press the 'LIGHT' button to turn on the built-in LED flashlight for use in dark conditions. Press again to turn off.
6. විසන්ධි කරන්න: Once inflation is complete and the compressor has stopped, press 'COMPRESSOR OFF', then carefully unscrew the air hose connector from the tyre valve.
7. ගබඩා: Coil the air hose and power cord back into their designated storage compartments. Store the inflator in its carrying case.

Image: The digital tyre inflator connected to a car tire, actively inflating it.

වැදගත් මෙහෙයුම් සටහන්:

• The maximum continuous run time for the inflator is 10 minutes. After 10 minutes of operation, allow the device to cool down for at least 10 minutes before resuming use. This prevents overheating and extends product life.
• For optimal performance and safety, always refer to your vehicle's owner's manual for recommended tyre pressure.

නඩත්තු කිරීම

• පිරිසිදු කිරීම: මෘදු, d ද්‍රාවණයකින් පිම්බීමේ යන්ත්‍රයේ පිටත කොටස පිස දමන්න.amp රෙදි. උල්ෙල්ඛ පිරිසිදු කරන්නන් භාවිතා නොකරන්න හෝ උපාංගය ජලයේ ගිල්වන්න එපා.
• ගබඩා: Store the inflator in its carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
• ෆියුස් ආදේශනය: The 12V cigarette lighter plug contains a replaceable fuse. If the inflator stops working, check and replace the fuse if necessary. A spare fuse is included in the package.

දෝෂගවේෂණය

• පුම්බන යන්ත්‍රය ක්‍රියාත්මක නොවේ:
  • Ensure the 12V cigarette lighter plug is fully inserted into the vehicle's socket.
  • Check the vehicle's 12V accessory socket for power.
  • Inspect the fuse in the 12V plug and replace if blown.
• පිම්බීම ක්‍රියාත්මක වන නමුත් පිම්බෙන්නේ නැත:
  • Ensure the air hose is securely screwed onto the tyre valve stem.
  • Check for any leaks in the air hose or connections.
• Inflator overheats and shuts off:
  • This is a safety feature. Allow the device to cool down for 10 minutes before resuming operation. Avoid continuous operation beyond 10 minutes.

පිරිවිතර

Image: Visual representation of the inflator's dimensions: 18.59 cm length, 17.81 cm width, and 7.37 cm height.

නිෂ්පාදනය අවසන්view වීඩියෝ

Watch this video for an unboxing and overview of the amazon basics Digital Tyre Inflator, demonstrating its components and initial handling.

වගකීම් සහ සහාය

For customer service and warranty-related inquiries, please refer to the contact information provided with your purchase documentation or visit the official amazon basics support page.

ඕනෑම වගකීම් හිමිකම් පෑමක් සඳහා කරුණාකර ඔබගේ මිලදී ගැනීමේ සාක්ෂි තබා ගන්න.