Klein මෙවලම් NCVT-4IR සම්බන්ධතා නොවන වෙළුමtage Tester with IR Thermometer User Manual

හැඳින්වීම

The Klein Tools NCVT-4IR is a versatile tool designed for professionals, combining non-contact AC voltage detection with an integrated infrared (IR) thermometer. This manual provides essential information for safe and effective operation of your device.

Image: The Klein Tools NCVT-4IR device, a yellow and black pen-style tool, shown from an angled perspective.

ආරක්ෂිත තොරතුරු

Always prioritize safety when using electrical testing equipment. Read and understand all instructions before operation.

• ලේසර් කිරණ ඇස්වලට යොමු නොකරන්න, මෙය ස්ථිර අක්ෂි හානියට හේතු විය හැක.
• Read, understand, and follow all instructions, cautions, and warnings attached to and/or packed with all Test & Measurement devices before each use.
• උෂ්ණත්වමානය මිනිසුන් හෝ සතුන් සඳහා භාවිතා කිරීමට අදහස් නොකෙරේ.
• Test on a known live circuit before use to confirm proper operation.

නිෂ්පාදන විශේෂාංග

• සම්බන්ධතා නොවන AC වෙළුමtage Detection: 12 to 1000V AC.
• Integrated Infrared Thermometer: Measures temperatures from -22 to 482°F (-30 to 250°C).
• Laser Pointer: For targeting temperature measurement areas.
• Visual and Audible Indicators: For voltagඊ හඳුනාගැනීම.
• Dust and Water Resistant: IP40 rating.
• Pocket Clip: For convenient portability.

Image: An infographic highlighting key features of the NCVT-4IR, such as its infrared thermometer range, AC voltage detection, and LCD backlit display.

සැකසුම සහ බැටරි ස්ථාපනය

1. To install or replace batteries, twist the end cap counter-clockwise to remove it.
2. Insert two new AAA 1.5V batteries, ensuring correct polarity (+/-).
3. Replace the end cap and twist clockwise until secure. Ensure the cap is fully tightened for proper operation and IP40 rating.
4. To prevent accidental activation and battery drain during storage, slightly loosen the end cap to disengage battery contact.

මෙහෙයුම් උපදෙස්

සම්බන්ධතා නොවන වෙළුමtage Testing (NCVT)

1. ඔබන්න NCV button to activate the non-contact voltage detection mode. The tip will illuminate blue.
2. Place the tester's tip near the conductor, outlet, or circuit you wish to test.
3. AC පරිමාව නම්tage is detected (12V to 1000V), the tip will glow red, and an audible alarm will sound. The intensity of the visual and audible indicators increases with voltage strength or proximity to the source.
4. Always test on a known live circuit first to ensure the tester is functioning correctly.

Infrared Thermometer (IR)

1. ඔබන්න IR button to activate the infrared thermometer. The laser pointer will activate to help aim.
2. Point the laser at the surface you wish to measure. The temperature will be displayed on the LCD screen.
3. The temperature range is -22 to 482°F (-30 to 250°C).
4. To switch between Fahrenheit and Celsius, press and hold the IR button.

Image: The NCVT-4IR being used to measure the temperature of an electrical component, with the laser pointer visible.

නඩත්තු කිරීම

• Keep the device clean and free from dust and debris. Use a dry, lint-free cloth for cleaning.
• නිවැරදි කියවීම් සහතික කිරීම සඳහා සංදර්ශකයේ අඩු බැටරි දර්ශකය දිස්වන විට වහාම බැටරි ප්‍රතිස්ථාපනය කරන්න.
• උපාංගය සෘජු හිරු එළියෙන් සහ අධික උෂ්ණත්වයන්ගෙන් ඈත්ව සිසිල් වියළි ස්ථානයක ගබඩා කරන්න.

දෝෂගවේෂණය

• බලය නැත/සංදර්ශකය අක්‍රියයි: Check battery installation and ensure the end cap is fully tightened. Replace batteries if necessary.
• Inaccurate NCV Readings: Ensure the tip is close enough to the conductor. Test on a known live circuit to verify functionality. Environmental factors can sometimes affect sensitivity.
• Inaccurate IR Readings: Ensure the laser is aimed directly at the target surface. Reflective surfaces can affect accuracy.

පිරිවිතර

වගකීම් සහ සහාය

Klein Tools products are designed for durability and performance. For warranty information or technical support, please refer to the official Klein Tools webවෙබ් අඩවියට හෝ ඔවුන්ගේ පාරිභෝගික සේවයට සෘජුවම සම්බන්ධ වන්න. වගකීම් හිමිකම් සඳහා ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.