DS18 6XL600-8 XL 6.5" මධ්‍යම පරාස ශබ්ද විකාශන යන්ත්‍ර උපදෙස් අත්පොත

නිෂ්පාදනය අවසන්view

The DS18 6XL600-8 is a high-performance 6.5-inch mid-range loudspeaker designed for professional car audio systems. It delivers clear and powerful sound with a robust construction for durability and optimal acoustic performance. This speaker is engineered to provide a wide frequency response and high sensitivity, ensuring an immersive audio experience.

පෙට්ටියේ ඇති දේ

• DS18 6XL600-8 Mid-Range Loudspeaker (1 unit)
• උපදෙස් අත්පොත

තාක්ෂණික පිරිවිතර

සැකසුම සහ ස්ථාපනය

Proper installation is crucial for optimal performance and longevity of your DS18 6XL600-8 loudspeaker. It is recommended to have professional installation for car audio components.

කථානායකවරයා සවි කිරීම

Ensure the mounting location has sufficient depth (3.44 inches) and a cut-out diameter of 5.9 inches. Use appropriate mounting hardware to secure the speaker firmly, minimizing vibrations.

රූපය: ඉදිරිපස view of the DS18 6XL600-8 speaker, showing the non-pressed paper cone and DS18 logo.

රූපය: ආපසු view of the DS18 6XL600-8 speaker, highlighting the push-to-connect terminals for wiring.

රැහැන් සහ සම්බන්ධතා

ස්පීකරය ගැළපෙන එකකට සම්බන්ධ කරන්න amplifier. Ensure correct polarity (+ to + and - to -) to avoid phase issues. The speaker has an 8-Ohm impedance and can handle up to 300W RMS power. Match the amplifier's output impedance and power to the speaker's specifications for optimal performance and to prevent damage.

The strategically designed ventilation system helps dissipate heat, ensuring reliable performance during prolonged high-volume use.

මෙහෙයුම් උපදෙස්

Once installed and wired correctly, your DS18 6XL600-8 loudspeaker is ready for operation. Follow these guidelines for the best audio experience:

• Amplifier සැකසුම්: ඔබගේ සකසන්න amplifier's gain levels appropriately. Start with low gain and gradually increase it until you achieve desired volume without distortion.
• හරස්කඩ සැකසුම්: ඔබේ භාවිතා කරන්න amplifier's or head unit's crossover functions. For mid-range speakers, a high-pass filter is typically recommended to prevent low frequencies from reaching the speaker, which can cause distortion and damage. Refer to your amplifier's manual for specific crossover frequency recommendations.
• ශබ්ද පාලනය: Avoid excessive volume levels that lead to audible distortion. Distortion can damage the speaker over time.

නඩත්තු කිරීම සහ රැකවරණය

To ensure the longevity and continued performance of your DS18 6XL600-8 loudspeaker, follow these maintenance tips:

• පිරිසිදු කිරීම: Use a soft, dry cloth to gently wipe the speaker cone and frame. Avoid using harsh chemicals or abrasive materials that could damage the speaker's components.
• පාරිසරික තත්ත්වයන්: Protect the speaker from direct exposure to excessive moisture, extreme temperatures, and direct sunlight for prolonged periods. While the aluminum basket offers durability, consistent exposure to harsh elements can degrade performance.
• පරීක්ෂාව: Periodically inspect the speaker for any signs of damage, loose connections, or wear and tear. Address any issues promptly to prevent further problems.

දෝෂගවේෂණය

If you encounter issues with your DS18 6XL600-8 loudspeaker, refer to the following common troubleshooting steps:

• ශබ්දයක් නැත:
  • සිට සියලුම රැහැන් සම්බන්ධතා පරීක්ෂා කරන්න amplifier to the speaker for secure contact and correct polarity.
  • බව තහවුරු කරන්න ampලයිෆයර් ක්‍රියාත්මක කර නිවැරදිව ක්‍රියාත්මක වේ.
  • Ensure the audio source (head unit, media player) is active and sending a signal.
• විකෘති ශබ්දය:
  • අඩු කරන්න amplifier's gain setting. Excessive gain can lead to clipping and distortion.
  • Check the crossover settings. Incorrect crossover points can cause the speaker to play frequencies it's not designed for, leading to distortion.
  • Inspect the speaker cone for any physical damage.
• අඩු පරිමාව:
  • වැඩි කරන්න amplifier's gain gradually.
  • Ensure the audio source's volume is turned up.
  • Check for any loose or corroded wiring connections that might impede signal flow.

නිෂ්පාදන මාධ්‍ය

රූප

Image: DS18 6XL600-8 speaker shown in its retail packaging.

Image: DS18 6XL600-8 speaker with a clear view of the wiring terminals.

රූපය: ඉදිරිපස view of the DS18 6XL600-8 speaker, highlighting the cone and logo.

රූපය: ඉහළ-පහළ view of the DS18 6XL600-8 speaker.

රූපය: පැත්ත view of the DS18 6XL600-8 speaker, showing its profile.

රූපය: සමීප රූපය view of the DS18 6XL600-8 speaker's push terminals.

රූපය: ආපසු view of the DS18 6XL600-8 speaker, showing the magnet and frame design.

වීඩියෝ

වගකීම් සහ සහාය

The DS18 6XL600-8 Mid-Range Loudspeaker comes with a Limited Warranty. For detailed warranty terms, service, or technical support, please refer to the official DS18 webවෙබ් අඩවිය හෝ ඔවුන්ගේ පාරිභෝගික සේවාව අමතන්න.

ඔබට සංචාරය කළ හැකිය DS18 ගබඩාව තවත් නිෂ්පාදන සහ තොරතුරු සඳහා.