ALCO Heavy Duty Wheelchair Arm Pads (Model AL-66055BK-A3) - Instruction Manual

හැඳින්වීම

This manual provides detailed instructions for the installation, proper use, and maintenance of your ALCO Heavy Duty Desk Length Wheelchair Arm Pads. These arm pads are designed for universal replacement on most manual wheelchairs, offering enhanced comfort and support. Please read these instructions carefully before installation and use.

Image 1: ALCO Heavy Duty Desk Length Wheelchair Arm Pads (Pair) with mounting hardware.

සැකසුම සහ ස්ථාපනය

The ALCO Heavy Duty Wheelchair Arm Pads are designed for straightforward installation. Ensure you have the correct tools, typically a screwdriver, before beginning.

1. සකස් කිරීම: Remove the existing arm pads from your wheelchair. Keep the old screws if they are in good condition and compatible, or use the new screws provided.
2. Hole Alignment: Position the new ALCO arm pad on the armrest frame. The arm pads feature two sets of pre-drilled holes to accommodate different wheelchair models. These hole spacings are approximately 5-1/2 inches (13.97 cm) or 3-5/16 inches (8.41 cm) center-to-center. Select the set of holes that aligns with your wheelchair's armrest frame.
3. ආරක්ෂිත ඇමුණුම: Insert the screws through the aligned holes in the arm pad and into the armrest frame. Tighten the screws securely but do not overtighten, as this may damage the arm pad or the wheelchair frame.
4. Repeat for Second Pad: Follow the same steps to install the second arm pad on the opposite side of the wheelchair.
5. අවසාන පරීක්ෂාව: Gently test the stability of both arm pads to ensure they are firmly attached before using the wheelchair.

රූපය 2: පහළ view of arm pad illustrating dual hole spacing options for universal fit.

නිසි භාවිතය

Once installed, the ALCO arm pads provide a comfortable and supportive surface for the user's arms. Ensure that the user's arms are resting fully on the pads for optimal support and pressure distribution. These arm pads are designed for manual wheelchairs and are not suitable for power chairs.

නඩත්තු කිරීම සහ රැකවරණය

• පිරිසිදු කිරීම: To clean the arm pads, wipe them with a damp cloth using mild soap and water. Avoid harsh chemical cleaners or abrasive materials, as these can damage the surface.
• පරීක්ෂාව: Regularly inspect the arm pads for any signs of wear, tears, or damage. Check the mounting screws periodically to ensure they remain tight.
• ගබඩා: If the arm pads are removed for storage, keep them in a clean, dry place away from direct sunlight and extreme temperatures.

දෝෂගවේෂණය

පිරිවිතර

• ආදර්ශ අංකය: AL-66055BK-A3
• වෙළඳ නාමය: ඇල්කෝ
• වර්ගය: Heavy Duty Desk Length Wheelchair Arm Pads
• වර්ණය: කළු
• දිග: අඟල් 10-1/4 (26.04 සෙ.මී.)
• Hole Spacing Options (Center-to-Center): 5-1/2 inches (13.97 cm) or 3-5/16 inches (8.41 cm)
• නිෂ්පාදන මානයන්: 25.73 x 5.41 x 3.81 සෙ.මී. (ආසන්න වශයෙන් 10.13 x 2.13 x 1.5 අඟල්)
• බර: 260 g (approximately 0.57 lbs) per pair
• ගැළපුම: Universal fit for most manual wheelchairs (e.g., Medline, Drive, Invacare, E&J, Guardian, Lumex, Tuffcare). Not for power chairs.

වගකීම් තොරතුරු

ALCO products are manufactured to high-quality standards. For specific warranty details regarding your ALCO Heavy Duty Wheelchair Arm Pads, please refer to the warranty documentation included with your purchase or contact the retailer or manufacturer directly. Keep your proof of purchase for any warranty claims.

පාරිභෝගික සහාය

If you have any questions about the installation, use, or maintenance of your ALCO Heavy Duty Wheelchair Arm Pads, or if you encounter any issues not covered in this manual, please contact your retailer or the ALCO customer support team for assistance. Provide your product model number (AL-66055BK-A3) when seeking support.

For further information, you may visit the official ALCO website or contact the seller from whom you purchased the product.