Diversitech FP-22 ඝනීභවනය ඉවත් කිරීමේ පොම්ප පරිශීලක අත්පොත

1. හැඳින්වීම

This manual provides essential instructions for the installation, operation, and maintenance of the Diversitech FP-22 Condensate Removal Pump. The FP-22 is designed to efficiently manage condensate water from furnaces and boilers, particularly in applications involving acidic and high-temperature conditions, up to 190°F (88°C).

Key features include a 22-foot maximum lift, steam-resistant electronics, vibration-dampening rubber feet, metal hang tabs for secure mounting, a built-in safety overflow switch, a check valve, and LED status indicators. The pump comes with four inlet holes, integrated P-traps, and 20 feet of 3/8" discharge tubing for a complete setup.

රූපය 1.1: ඉදිරිපස පැත්ත view of the Diversitech FP-22 Condensate Removal Pump. This image shows the overall design of the pump, including the red base and black motor housing.

2. වැදගත් ආරක්ෂක තොරතුරු

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death.

• ඕනෑම නඩත්තුවක් හෝ සේවාවක් සිදු කිරීමට පෙර සෑම විටම ඒකකයට විදුලිය විසන්ධි කරන්න.
• Ensure the pump is installed by a qualified professional in accordance with local electrical and plumbing codes.
• විදුලි රැහැන හෝ ප්ලග් එකට හානි සිදුවී ඇත්නම් පොම්පය ක්‍රියාත්මක නොකරන්න.
• This pump is designed for condensate removal only. Do not use it for flammable liquids or other applications.
• අත් සහ විදේශීය වස්තූන් චලනය වන කොටස් වලින් ඈත් කර තබන්න.
• The pump is rated for 120V. Ensure the power supply matches this requirement.

3. පැකේජ අන්තර්ගතය

සියලුම අයිතම පැකේජයේ ඇති බව තහවුරු කරගන්න:

• Diversitech FP-22 Condensate Removal Pump (120V)
• 20 feet of 3/8" discharge tubing
• ස්ථාපනය සහ මෙහෙයුම් අත්පොත (මෙම ලේඛනය)

4. ස්ථාපන උපදෙස්

4.1 පොම්පය සවි කිරීම

The FP-22 pump can be mounted on a flat surface or suspended using the integrated metal hang tabs. For optimal noise reduction and stability, utilize the vibration-dampening rubber feet.

• Choose a stable, level location near the condensate source.
• If suspending, ensure the mounting surface is secure and can support the pump's weight when full.

රූපය 4.1: පැත්ත view of the FP-22 pump, highlighting the metal hang tabs for secure mounting.

4.2 Condensate Inlet Connection

The pump features four inlet holes with built-in "P" traps. Connect the condensate drain line from your furnace or boiler to one of these inlets.

• Ensure a tight, leak-free connection.
• The integrated P-traps prevent odors and gases from entering the system.

4.3 Discharge Line Connection

Connect the provided 3/8" discharge tubing to the pump's discharge outlet. Route the tubing to a suitable drain location, ensuring a continuous downward slope if possible, or a clear path for the pump to lift the water.

• Avoid kinks or sharp bends in the discharge tubing.
• Secure the tubing to prevent accidental dislodgement.
• The pump includes a check valve to prevent backflow.

රූපය 4.2: ඉහළට view of the FP-22 pump, illustrating the four inlet ports and the discharge connection point.

4.4 විදුලි සම්බන්ධතාවය

Connect the pump's power cord to a dedicated 120V electrical outlet. Ensure the outlet is properly grounded and protected by a circuit breaker.

• දිගු රැහැන් භාවිතා නොකරන්න.
• බල සැපයුම පොම්පයේ වෝල්ටීයතාවයට ගැලපෙන බව තහවුරු කරන්න.tagඊ අවශ්යතා.

5. මෙහෙයුම

The Diversitech FP-22 operates automatically. When condensate water fills the reservoir to a predetermined level, the internal float switch activates the pump, which then discharges the water through the discharge tubing. Once the water level drops, the pump deactivates.

5.1 LED දර්ශක

The pump is equipped with LED indicators to provide status updates:

• බල LED: Indicates the pump is receiving electrical power.
• LED ධාවනය කරන්න: Illuminates when the pump motor is actively running.
• එලාම් LED: Activates if the water level reaches the high-level safety overflow switch, indicating a potential issue.

5.2 Safety Overflow Switch

A built-in safety overflow switch provides an additional layer of protection. If the water level rises above the normal operating range, this switch will activate, typically shutting down the connected HVAC equipment to prevent overflow and water damage. Consult your HVAC system's manual for wiring instructions for this safety feature.

6. නඩත්තු කිරීම

Regular maintenance ensures optimal performance and extends the life of your condensate pump.

6.1 වරින් වර පිරිසිදු කිරීම

• බලය විසන්ධි කරන්න: Always unplug the pump from the electrical outlet before cleaning.
• Drain Reservoir: Remove any remaining water from the reservoir.
• පිරිසිදු ජලාශය: Use a mild detergent and warm water to clean the inside of the reservoir, removing any sludge or debris. Pay attention to the float switch mechanism to ensure it moves freely.
• නල මාර්ග පරීක්ෂා කරන්න: Check the inlet and discharge tubing for blockages or signs of wear.
• නැවත එකලස් කරන්න: Reconnect all tubing and plug the pump back into the power outlet.

Perform this cleaning at least once every six months, or more frequently if the condensate quality is poor or the pump is in heavy use.

7. දෝශ නිරාකරණය

This section addresses common issues you might encounter with your FP-22 condensate pump.

8. පිරිවිතර

9. වගකීම් සහ සහාය

For warranty information and technical support, please refer to the official Diversitech webවෙබ් අඩවියට පිවිසෙන්න හෝ ඔවුන්ගේ පාරිභෝගික සේවා දෙපාර්තමේන්තුව අමතන්න. මිලදී ගැනීමේ සාක්ෂියක් ලෙස ඔබේ මිලදී ගැනීමේ රිසිට්පත තබා ගන්න.

නිෂ්පාදකයා: DiversiTech සංස්ථාව

Webඅඩවිය: www.diversitech.com (උදාampසබැඳිය, සැබෑ සබැඳිය වෙනස් විය හැක)

For service or parts, please contact a qualified HVAC technician or the manufacturer directly.