TELEFUNKEN M80 ගතික මයික්‍රෆෝන පරිශීලක අත්පොත

1. හැඳින්වීම

The TELEFUNKEN M80 is a dynamic microphone designed to offer superior audio performance for a variety of applications. It provides a wider frequency response and higher sound pressure level (SPL) capabilities compared to standard dynamic microphones, delivering condenser-like performance in a robust dynamic design. The M80 is suitable for capturing vocals, instruments, and drums in both live stage and studio environments. Its low-mass capsule and thin, durable membrane contribute to its ability to capture a broad range of emotional nuances from live vocals, a characteristic often associated with studio-quality condenser microphones.

Image 1.1: The TELEFUNKEN M80 Dynamic Microphone, featuring a green body and chrome grille.

2. පෙට්ටියේ ඇති දේ

Upon unboxing your TELEFUNKEN M80 Dynamic Microphone, please ensure all components are present:

• TELEFUNKEN M80 ගතික මයික්‍රෆෝනය
• මයික්රොෆෝන ක්ලිප්
• ආරක්ෂිත මල්ල

3. පිහිටුවීම

3.1 මයික්‍රෆෝනය සවි කිරීම

The M80 microphone is designed for handheld use or mounting on a standard microphone stand. Use the included microphone clip for secure attachment.

1. Attach the microphone clip to a standard microphone stand (not included) by screwing it onto the threaded post.
2. Gently insert the base of the M80 microphone into the clip until it is securely held.

Image 3.1: The included microphone clip, designed to securely hold the M80.

3.2 මයික්‍රෆෝනය සම්බන්ධ කිරීම

The M80 uses a standard 3-pin XLR connector for audio output. It is a passive dynamic microphone and does not require phantom power.

1. Connect one end of a balanced XLR cable (not included) to the XLR output port at the base of the M80 microphone.
2. Connect the other end of the XLR cable to an available microphone input on your mixer, audio interface, or preampජීවිතාරක්ෂකයා.
3. සියලුම සම්බන්ධතා ස්ථිර සහ ආරක්ෂිත බව සහතික කර ගන්න.

4. මයික්‍රෆෝනය ක්‍රියාත්මක කිරීම

4.1 Polar Pattern

The TELEFUNKEN M80 features a unidirectional (cardioid) polar pattern. This means the microphone is most sensitive to sounds coming from directly in front of it and significantly less sensitive to sounds from the sides and rear. This characteristic helps to reduce feedback in live sound environments and isolate the desired sound source in the studio.

4.2 Recommended Uses and Placement

The M80 is versatile and excels in various applications:

• Vocals (Singing & Speech): For lead vocals, position the microphone 2-6 inches from the mouth. Experiment with distance to control proximity effect (increased bass response when close to the mic). For speech, maintain a consistent distance for clear articulation.
• උපකරණ: Can be used for guitar amplifiers, snare drums, and other instruments. For guitar amps, try positioning the microphone 1-6 inches from the speaker cone, off-axis for a warmer tone, or on-axis for more bite.
• බෙර: Effective for snare drum, tom-toms, or as an overhead microphone in certain setups.

Always monitor your sound through headphones or speakers to find the optimal placement for your specific application.

5. නඩත්තු කිරීම

5.1 පිරිසිදු කිරීම

To maintain the performance and appearance of your M80 microphone:

• මයික්‍රෆෝන ශරීරය මෘදු වියළි රෙද්දකින් පිස දමන්න.
• For the grille, use a soft brush to remove any debris. Avoid using liquid cleaners directly on the grille or capsule.
• Ensure the microphone is disconnected from any power source before cleaning.

5.2 ගබඩා කිරීම

When not in use, store the M80 in its protective pouch to shield it from dust, moisture, and physical damage.

Image 5.1: The protective pouch for storing the M80 microphone.

5.3 හැසිරවීමේ පූර්වාරක්ෂාව

• Avoid dropping the microphone, as this can damage the internal components.
• Do not expose the microphone to extreme temperatures or high humidity.
• Do not attempt to disassemble the microphone. Refer to qualified service personnel for repairs.

6. දෝශ නිරාකරණය

If you encounter issues with your TELEFUNKEN M80, consider the following common troubleshooting steps:

• ශබ්දයක් නැත:
  • Ensure all XLR cables are securely connected at both the microphone and the input device.
  • ඔබේ මික්සර් හෝ අතුරුමුහුණතෙහි ආදාන නාලිකාව තෝරාගෙන එහි ලාභය ඉහළට හැරී ඇති බව තහවුරු කරන්න.
  • දෝෂ සහිත කේබලයක් බැහැර කිරීම සඳහා වෙනත් XLR කේබලයක් සමඟ පරීක්ෂා කරන්න.
  • Confirm that the input device is powered on and functioning correctly.
• විකෘති ශබ්දය:
  • Reduce the input gain on your mixer or interface. The M80 has high SPL capabilities, so excessive gain can cause clipping.
  • Ensure the microphone is not positioned too close to a very loud sound source, which could overload the capsule.
  • Check for any processing (e.g., compression, EQ) that might be causing distortion.
• ප්‍රතිපෝෂණය:
  • Reposition the microphone further away from speakers or monitors.
  • Adjust the angle of the microphone, utilizing its unidirectional polar pattern to point away from sound sources that could cause feedback.
  • Reduce the overall volume or specific frequency ranges that are feeding back.

If these steps do not resolve the issue, please contact TELEFUNKEN Elektroakustik support for further assistance.

7. පිරිවිතර

8. වගකීම් සහ සහාය

For information regarding warranty coverage and terms for your TELEFUNKEN M80 Dynamic Microphone, please refer to the documentation provided at the time of purchase or visit the official TELEFUNKEN Elektroakustik website. For technical support, service, or parts, please contact TELEFUNKEN Elektroakustik directly.

නිෂ්පාදකයා: TELEFUNKEN Elektroakustik

නිල වෙළඳසැල: TELEFUNKEN Elektroakustik Store