හැඳින්වීම
This manual provides essential instructions for the safe and effective use of the MSA Altair 4X Multigas Detector and its accompanying calibration kit. Please read this manual thoroughly before operating the device to ensure proper function and safety.
නිෂ්පාදනය අවසන්view
The MSA Altair 4X Multigas Detector is a portable device designed to simultaneously measure up to four gases: combustible gases (LEL), oxygen (O2), carbon monoxide (CO), and hydrogen sulfide (H2S). It features XCell sensor technology and Bluetooth connectivity, allowing information to be viewed on an Android device.
ප්රධාන ලක්ෂණ ඇතුළත් වේ:
- Large buttons and a bright display for clear operation, even with gloves.
- MotionAlert sensor: Activates an alarm if the user becomes immobile for 30 seconds.
- InstantAlert feature: Allows users to manually trigger an alarm in dangerous situations.
- Compatibility with Galaxy Test System and Altair 4 QuickCheck Station.
- MSA Link software readiness for data management.
රූපය 1: MSA Altair 4X Multigas Detector. This image shows the front view of the black, rugged gas detector with its digital display showing gas readings and control buttons.
සැලසුම
ඇසිරීම සහ පරීක්ෂා කිරීම
- Carefully unpack all components from the calibration kit case.
- Inspect the detector, calibration gas cylinder, and flow control regulator for any visible damage. Do not use if damaged.
රූපය 2: Black calibration kit case. This image displays a black, rectangular carrying case with a handle and latches, designed to protect the detector and calibration components.
බැටරි ස්ථාපනය
The device is battery-powered. Ensure batteries are correctly installed according to the markings inside the battery compartment. (Note: Batteries are not included with the product.)
Calibration Kit Assembly
- Attach the flow control regulator to the calibration gas cylinder. Ensure a secure, leak-free connection.
- Connect the tubing from the regulator to the detector's calibration port.
රූපය 3: Calibration gas cylinder. This image shows a silver gas cylinder with a blue and white label, containing calibration check gas.
රූපය 4: Flow control regulator. This image displays a metallic flow control regulator with a pressure gauge, used to regulate gas flow from the cylinder.
මෙහෙයුම් උපදෙස්
බල ගැන්වීම / අක්රිය කිරීම
- බල ගැන්වීමට, සංදර්ශකය ආලෝකමත් වන තුරු බල බොත්තම ඔබාගෙන සිටින්න.
- To power off, press and hold the power button until the shutdown sequence completes.
පෙර භාවිත චෙක්පත්
- Verify battery level is sufficient for the intended use period.
- Perform a bump test daily or before each use to confirm sensor response.
- Ensure all sensor readings are stable and within acceptable limits in fresh air.
Monitoring Gases
The detector continuously displays real-time gas concentrations for LEL, O2, CO, and H2S. Alarms will activate if gas levels exceed preset thresholds.
MotionAlert and InstantAlert
- MotionAlert: If the detector remains motionless for 30 seconds, a pre-alarm will sound, followed by a full alarm if no movement is detected.
- InstantAlert: Press the designated button to manually activate an audible and visual alarm to alert others of a hazardous situation.
නඩත්තු කිරීම
ක්රමාංකනය
Regular calibration is crucial for accurate readings. Refer to the detector's on-screen prompts and the calibration kit instructions for detailed steps. Calibration frequency should adhere to local regulations and company policies, typically every 3-6 months.
සංවේදක ජීවිතය
The XCell sensors have an approximate four-year lifespan. Replace sensors as indicated by the device or during routine maintenance if performance degrades.
පිරිසිදු කිරීම සහ ගබඩා කිරීම
- Clean the exterior of the detector with a damp රෙදි. දරුණු රසායනික ද්රව්ය හෝ උල්ෙල්ඛ ද්රව්ය භාවිතා නොකරන්න.
- Store the detector and calibration kit in a cool, dry place away from direct sunlight and extreme temperatures.
දෝෂගවේෂණය
පොදු ගැටළු සහ විසඳුම්
| කලාපය | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Detector not powering on | අඩු හෝ මිය ගිය බැටරි; වැරදි බැටරි ස්ථාපනය. | බැටරි ප්රතිස්ථාපනය කරන්න; නිවැරදි ධ්රැවීයතාව සහතික කරන්න. |
| Inaccurate gas readings | Detector requires calibration; sensor failure; blocked sensor inlet. | Perform calibration; replace faulty sensor; clear any obstructions. |
| ක්රමාංකනය අසාර්ථක වීම | Incorrect gas flow; expired calibration gas; faulty regulator. | Check regulator connection and flow; use fresh calibration gas; inspect regulator. |
| MotionAlert false alarms | Detector left stationary for too long. | Ensure detector is moved periodically or placed in a stable, non-hazardous location when not in active use. |
If issues persist after attempting these solutions, contact MSA customer support for further assistance.
පිරිවිතර
- වෙළඳ නාමය: එම්එස්ඒ
- ආදර්ශ අංකය: 10110488
- බලශක්ති ප්රභවය: බැටරි බලයෙන් ක්රියාත්මක වේ (බැටරි ඇතුළත් නොවේ)
- හඳුනාගත් වායූන්: Combustible (LEL), Oxygen (O2), Carbon Monoxide (CO), Hydrogen Sulfide (H2S)
- සංවේදක වර්ගය: Gas (XCell sensors)
- අනතුරු ඇඟවීමේ වර්ගය: Audible, Visual (InstantAlert, MotionAlert)
- වර්ණය: Black, Blue, Gold
- අයිතමයේ බර: Approximately 11 Pounds (for the kit)
- පැකේජ ප්රමාණය: 1 (includes detector and calibration kit components)
- කෑලි ගණන: 3 (detector, gas cylinder, regulator)
- මුලින්ම ලබා ගත හැකි දිනය: නොවැම්බර් 6, 2017
වගකීම් සහ සහාය
Specific warranty details are not provided within this document. For warranty information, technical support, or service inquiries, please refer to the official MSA website or contact MSA customer service directly. Keep your purchase receipt for warranty claims.
MSA Official Webඅඩවිය: www.msasafety.com
