1. හැඳින්වීම
This manual provides essential instructions for the installation, operation, and maintenance of the ROGER TECHNOLOGY R30/1204 Automatic Sliding Gate Motor. This electromechanical gear motor is designed for sliding gates weighing up to 1200 kg. It features an integrated H70 series control unit, an optical encoder, and a magnetic limit switch for precise and reliable operation. Please read this manual thoroughly before installation and use to ensure safe and correct operation.
2. ආරක්ෂිත උපදෙස්
වැදගත්: Failure to follow these safety instructions may result in serious injury or damage to property.
- Installation must be performed by qualified personnel in compliance with local electrical and safety regulations.
- Ensure the power supply is disconnected before performing any installation, maintenance, or repair work.
- Do not allow children to play with or near the gate motor or its controls.
- Keep hands and loose clothing clear of moving parts of the gate and motor.
- Regularly inspect the gate and motor for signs of wear, damage, or misalignment.
- Do not attempt to repair the motor yourself. Contact qualified service personnel.
3. නිෂ්පාදන අවසන්view
The ROGER TECHNOLOGY R30/1204 is a robust motor designed for automating sliding gates. Its compact design houses a powerful 230V AC motor, an integrated control unit, and advanced safety features.
රූපය 3.1: බාහිර පෙනුම view of the R30/1204 motor unit.
Figure 3.2: Internal components, highlighting the motor and gear mechanism.
ප්රධාන ලක්ෂණ:
- Electromechanical gear motor for sliding gates.
- Suitable for gates up to 1200 kg.
- Integrated H70 series control unit.
- Optical encoder for precise gate positioning.
- Magnetic limit switches for accurate stop points.
- Irreversible gearbox for secure gate locking.
4. පිරිවිතර
| පරාමිතිය | වටිනාකම |
|---|---|
| ආදර්ශ අංකය | R30-1204 |
| වෙළඳ නාමය | රොජර් තාක්ෂණය |
| උපරිම ගේට්ටු බර | කිලෝ ග්රෑම් 1200 කි |
| රේඛීය බල සැපයුම | 230 V AC - 50 Hz |
| මෝටර් බල සැපයුම | 230 V AC |
| ශ්රේණිගත බලය | 420 ඩබ්ලිව් |
| රාජකාරි සයිකල් | 50% |
| තෙරපුම | 800 N |
| මෙහෙයුම් උෂ්ණත්වය | -20 සිට +55 ° C |
| Motor Protection Temperature | 150 °C |
| ගේට්ටු වේගය | 9.5 m/min (0.16 m/s) |
| Gearbox Type | ආපසු හැරවිය නොහැකි |
| ස්විච් වර්ගය සීමා කරන්න | චුම්බක |
| පාලන ඒකකය | Integrated H70/104AC |
| කේතීකරණ වර්ගය | ඔප්ටිකල් |
| Max Product Dimensions (L x W x H) | 325 x 162 x 295 මි.මී |
| ද්රව්ය | ලෝහ |
5. පිහිටුවීම සහ ස්ථාපනය
Installation of the R30/1204 motor requires technical expertise and should only be performed by qualified professionals. This section provides a general overview; refer to the detailed installation manual provided with the product for specific wiring diagrams and mounting instructions.
- අඩවිය සකස් කිරීම: Ensure the gate track is clean, level, and free of obstructions. Prepare a stable concrete base for the motor unit.
- මෝටරය සවි කිරීම: Securely fasten the motor unit to the prepared base using appropriate anchor bolts. Ensure correct alignment with the gate rack.
- රාක්කය ස්ථාපනය කිරීම: Attach the gate rack to the sliding gate, ensuring proper meshing with the motor's pinion gear. Maintain a small clearance between the rack and the pinion.
- විදුලි සම්බන්ධතා: Connect the motor to the 230V AC power supply. Wire the control unit (H70 series) according to the provided diagrams, including connections for safety photocells, remote controls, and other accessories.
- සීමා ස්විච ගැලපීම: Install and adjust the magnetic limit switches at the desired open and closed positions of the gate. These switches signal the motor to stop.
- මූලික වැඩසටහන්කරණය: Power on the system and perform the initial programming steps for the control unit, which typically involves learning the gate's travel limits and setting operational parameters.
- ආරක්ෂිත උපාංග පරීක්ෂාව: Thoroughly test all safety devices, such as photocells and emergency stop buttons, to ensure they function correctly.
6. මෙහෙයුම් උපදෙස්
Once installed and programmed, the R30/1204 motor provides automated control of your sliding gate.
- දුරස්ථ පාලක: Press the designated button on your remote control to open, close, or stop the gate.
- අතින් නිකුත් කිරීම: In case of power failure or malfunction, the motor can be manually disengaged. Locate the manual release mechanism (usually a key-operated lever) on the motor unit, unlock it, and manually slide the gate. Remember to re-engage the motor after restoring power or resolving the issue.
- ආරක්ෂිත විශේෂාංග: The optical encoder and safety photocells are designed to detect obstacles. If an obstacle is detected during closing, the gate will reverse. If detected during opening, the gate will stop.
7. නඩත්තු කිරීම
නිතිපතා නඩත්තු කිරීම ඔබේ ගේට්ටු මෝටරයේ දීර්ඝ ආයු කාලය සහ විශ්වාසනීය ක්රියාකාරිත්වය සහතික කරයි.
- මාසිකව:
- Inspect the gate track and wheels for debris and clear any obstructions.
- Check the gate rack for wear or damage.
- Verify the proper functioning of safety photocells and limit switches.
- සෑම මාස හයකට වරක්:
- Lubricate moving parts of the gate (wheels, bearings) as recommended by the gate manufacturer.
- Check all electrical connections for tightness and signs of corrosion.
- Inspect the motor housing for any damage or water ingress.
- වාර්ෂික වෘත්තීය පරීක්ෂාව: It is recommended to have a qualified technician perform an annual inspection and service of the entire gate automation system.
8. දෝශ නිරාකරණය
This section addresses common issues you might encounter. For more complex problems, consult a qualified technician.
| ගැටලුව | විය හැකි හේතුව | විසඳුම |
|---|---|---|
| Motor does not respond to remote. | No power; remote battery dead; remote not programmed; safety device triggered. | Check power supply; replace remote battery; reprogram remote; check photocells for obstructions. |
| අනපේක්ෂිත ලෙස ගේට්ටුව නතර වේ. | Obstruction detected by photocells or encoder; limit switch faulty; motor overheating. | Clear obstructions; check limit switch connections; allow motor to cool down. |
| ගේට්ටුව අර්ධ වශයෙන් විවෘත වේ/වැසෙයි. | Limit switches incorrectly set or faulty; gate obstruction. | Re-adjust limit switches; clear any physical obstructions. |
| මෝටරය අසාමාන්ය ශබ්ද නිකුත් කරයි. | Lack of lubrication; worn gears; foreign object in mechanism. | Lubricate moving parts; inspect gears for wear; remove any foreign objects. If noise persists, contact support. |
9. වගකීම් සහ සහාය
Information regarding the specific warranty period and terms for the ROGER TECHNOLOGY R30/1204 motor is typically provided with the product documentation at the time of purchase. Please refer to your purchase receipt or contact your dealer for warranty details.
For technical support, spare parts, or service, please contact your authorized ROGER TECHNOLOGY dealer or installer.
- අමතර කොටස් ලබා ගැනීමේ හැකියාව: තොරතුරු නොමැත.
- මෘදුකාංග යාවත්කාලීන: තොරතුරු නොමැත.
