1. නිෂ්පාදන අවසන්view
The Waveshare 7-inch HDMI LCD (H) is a versatile capacitive touch screen monitor featuring a 1024x600 IPS display with a toughened glass cover. Designed for broad compatibility, it supports various single-board computers and systems, offering a responsive and clear visual interface.
ප්රධාන ලක්ෂණ:
- අඟල් 7 IPS සංදර්ශකය: පුළුල් පරාසයක් සපයයි viewing angle and vibrant colors.
- 1024x600 Resolution: Offers clear and crisp visuals.
- Capacitive Touch: Supports 5-point touch (driver-free for most supported systems).
- Toughened Glass Cover: Enhances durability and protection.
- පුළුල් ගැළපුම: Works with Raspberry Pi (all versions), Jetson Nano, PCs (Windows 10/8.1/8/7), and various game consoles (Xbox360, PS4, Switch).
- රියදුරු-නිදහස් මෙහෙයුම: Plug-and-play functionality for many supported operating systems.
2. පැකේජ අන්තර්ගතය
පහත ලැයිස්තුගත කර ඇති සියලුම අයිතම ඔබේ පැකේජයට ඇතුළත් කර ඇති බව තහවුරු කරගන්න:
- 1x 7-inch HDMI LCD (H) Monitor
- 2x Brackets (for stand)
- 1x HDMI කේබලය
- 1x USB-A to Type-C Cable
- 1x Mini HDMI to HDMI Adapter
- 2x දිගු ඉස්කුරුප්පු
- 4x Copper Screws
- 4x කෙටි ඉස්කුරුප්පු
- 1x ඉස්කුරුප්පු නියනක්
- 1x පරිශීලක අත්පොත
3. පිරිවිතර
| විශේෂාංගය | පිරිවිතර |
|---|---|
| සංදර්ශක තිරය | අඟල් 7 |
| පැනල් වර්ගය | IPS |
| ස්පර්ශ වර්ගය | 5-point Capacitive Touch |
| විභේදනය | 1024 x 600 |
| දීප්තිය | 420 cd/m² |
| Viewing කෝණය | 170° (H) / 170° (V) |
| Refresh Rate | 60Hz |
| අතුරු මුහුණත | HDMI, Type-C, 3.5mm Audio |
| ආදාන වෙළුමtage | 5V |
| Total Power (Max) | 2.55W |
| මෙහෙයුම් උෂ්ණත්වය | -20°C ~ 60°C |
| ගබඩා උෂ්ණත්වය | -30°C ~ 70°C |
| නිෂ්පාදන බර | රාත්තල් 0.9 (අවුන්ස 10.6) |
| Screen Dimensions (L×W×D) | 165x102x15mm (6.5x4.0x0.6 in) |
| Display Area (L×W) | 154x86 මි.මී |
| සහාය දක්වන පද්ධති | Windows 11/10/8.1/8/7, Raspbian, Ubuntu, Kodi |
4. පිහිටුවීම සහ ස්ථාපනය
4.1 ආධාරක සවි කිරීම
- Carefully remove the protective film from the included stand brackets.
- Align the brackets with the screw holes on the back of the monitor.
- Secure the brackets using the provided long screws and screwdriver. Do not overtighten.
4.2 Raspberry Pi Connection Setup
To ensure proper functionality with Raspberry Pi, specific configuration changes are required:
- Insert your Raspberry Pi's SD card into a computer.
- විවෘත කරන්න
config.txtfile located in the root directory of the SD card. - Add the following lines at the end of the file:
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_group=2
hdmi_mode=87
hdmi_drive=1
display_rotate=0
hdmi_cvt 1024 600 60 6 0 0 0If you are using the official Raspberry Pi OS (2021-10-30), change:
dtoverlay=vc4-kms-v3d
to:
#dtoverlay=vc4-kms-v3d- Save the changes and safely eject the SD card.
- Insert the SD card back into your Raspberry Pi.
- Connect the HDMI and TOUCH interfaces of the monitor to the Raspberry Pi's card.
- Power up the Raspberry Pi, and the display and touch functionality should work properly.
4.3 PC Connection Setup
For PC connection, set the resolution according to the instructions in the manual. If using dual monitors, configure the primary and secondary screens, and adjust the resolution for each monitor accordingly.
5. මොනිටරය ක්රියාත්මක කිරීම
5.1 තිරය මත සංදර්ශක (OSD) මෙනුව
The monitor features tactile buttons on the back for navigating the OSD menu. These buttons allow you to adjust various display settings.
- මෙනුව: Press to open the main menu, then press again to enter a sub-menu.
- Left/Up: Navigate left/up in the menu, or decrease values.
- Right/Down: Navigate right/down in the menu, or increase values.
- ආපසු: Exit the current menu or return to the previous menu.
- බලය: සංදර්ශකය සක්රිය / අක්රිය කරන්න.
ස්පර්ශ පාලනය
The capacitive touch screen supports up to 5-points touch, depending on the operating system. This allows for intuitive interaction with compatible devices.
6. නඩත්තු කිරීම
ඔබේ මොනිටරයේ ආයු කාලය සහ ප්රශස්ත ක්රියාකාරිත්වය සහතික කිරීම සඳහා, මෙම නඩත්තු මාර්ගෝපදේශ අනුගමනය කරන්න:
- පිරිසිදු කිරීම: Use a soft, dry cloth to clean the external housing. For the screen, use a soft cloth slightly dampened with water or a non-abrasive screen cleaner. Avoid harsh chemicals.
- හැසිරවීම: Avoid dropping the monitor or subjecting it to strong impacts. Do not place heavy objects on the screen.
- පරිසරය: Keep the monitor in a well-ventilated area, away from direct sunlight, heat sources, and excessive moisture.
7. දෝශ නිරාකරණය
- Monitor is not powering on: Ensure the power cable is properly plugged into the Raspberry Pi and the included USB-A to C cable is securely connected between the board and the display.
- Image is reversed: The monitor does not support image flip.
- Touch functionality not working: Make sure the USB-A to C cable is connected between the Raspberry Pi board and the display, directly from the display to the power socket.
- No signal on display: Ensure the HDMI cable is properly connected between the Raspberry Pi board and the display. If using a mini HDMI port, make sure to use the included mini HDMI to HDMI adapter.
- සහාය දක්වන මෙහෙයුම් පද්ධති: Windows 11/10/8.1/7, Raspbian, Ubuntu, Kodi.
- Using with PS3/PS4/Xbox One/Xbox 360: Yes, please use the HDMI port.
- Power source shut off, monitor not turning back on: If the monitor will come back on, or do you have to press the button.
- ශබ්දයක් නැත: This monitor has no built-in speakers. For sound output, connect external speakers via the 3.5mm audio jack.
8. වගකීම් සහ සහාය
The product comes with a 12-month warranty for quality-related issues. You can return any undamaged product within 12 months for a refund or replacement. Shipping costs and import duties/taxes are not included in the refund/replacement process.
සබඳතා තොරතුරු:
- Webඅඩවිය: www.eyoyousa.com
- විද්යුත් තැපෑල: support@eyoyomonitor.com
- දුරකථන: 909-317-8588 (9:00AM-5:00PM; Monday-Friday)
- USA Office Address: 10700 Jersey Blvd Ste 640, Rancho Cucamonga, CA 91730, USA
9. මාධ්ය ගැලරිය
නිෂ්පාදන රූප
